Question about UPS Battery Backup Systems

1 Answer

Can not connect my MEDION 8828 MD computor via a HDMI cable to my SAMSUNG ps42q97 hdx 42

I can not connect the Medion 8828 MD Computor to my Samsung ps42q97hdx 42" plasma TV via a HDMI cable as the TV tells me that "THERE IS NO SIGNEL"
The HDMI cable is ok and the computor is BRAND NEW and working ok. "CAN YOU HELP PLEASE".

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Can not connect my MEDION 8828 MD computor via a HDMI...

Use a vga connector. this tv doesn't support pc mode on hdmi. don't forget the 3.5mm stereo jack out fron your sound card to the 3.5mm input(next to vga on tv). you will get 1024x768 res.

Posted on Oct 01, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How can i communicate from my pc to the ups on the 9 pin serial connection

Taken from the MGE UPS SYSTEMS, Network Management Card Installation manual (34003641EN/AD)

Run Hyper Terminal on a PC running Windows (9x, Me, NT4.0, 2000 or


Connect the card to the PC using the cable supplied.

Set up the terminal with the following communication parameters:

9600 bauds. 8 data bits.

1 stop bit. no parity.

no flow control.

ASCII: "echo typed characters locally" option disabled.

Press the Carriage return key. The configuration menu is displayed.

Enter the password (MGEUPS by default).

The main menu is displayed.

Select one of the items in the configuration menu.

Via the serial link or Telnet

Select the "Agent configuration" command by entering 1.

Select the item numbers and modify all the IP parameters (address, mask, gateway).

Once all the modifications have been made, exit following the instructions on the screen.

Restarting the card Via the serial link or Telnet

Select the "Restart agent" command by entering 6.

Then follow the instructions on the screen.

Restoring the default parameters Via Telnet or Hyper Terminal

Select the "Agent configuration" command by entering 1.

Select the "Reset configuration to default" command by entering 5.

Then follow the instructions on the screen

Nov 05, 2010 | MGE UPS Galaxy 3000 UPS System

2 Answers

How to charge ups for pc's

Your PC connection must always come via UPS, and your UPS will always keep charging.

UPS Power cable should be connected to DC, and your PC power cable should be connected to UPS.

And this way your PC will always be safe.

Nov 06, 2009 | QVS NetStar (UPS650A) UPS System

1 Answer

Hewelett packard i need product key for my windows 98 computor

Hi I would check for a windows sticker on your pc. It should have the product key there. They usually stick the sticker on the pc.

Jan 31, 2009 | UPS Battery Backup Systems

1 Answer

The application support disc of my sansui(M2170)

I could not find a application support disk, but I assume you are looking for the drivers. Your laptop is made by Medion. I have the same model . I found the sound card drivers here.

For the rest I used software called “Everest Home Addition” to get the model numbers of each device and googled the drivers for each one.

Hope that helps.

Nov 25, 2008 | Panamax MAX1500UPS (PANMAX1500UPS) UPS...

1 Answer

WTService fault

Right click on task bar, click on properties, start menu, 'customized', 'advanced', scroll down to end of list and you'll see " System Administrative Tools". Select 2nd option "display on the all programs and start menu" and apply or OK all the way out.
Now, from START menu, click on "Administrative Tools" - then "Services" - scroll down to bottom where you'll find "WT SERVICE". Right click and click on "properties". Change 'startup type' from 'automatic' to 'manual' and you can now select 'stop' button. Click ok and your laptop will now stand by. If youor Medion doesn't work you can now turn on the WT service manually.
Uncle Bob

Jun 12, 2008 | UPS Battery Backup Systems

3 Answers

How to use the Medion Digital Notepad

With my medion digital notebookproblems with the pen instead of writing left to right, it rights on the right to the bottom of the page on the right can you help please as well

Jan 02, 2008 | UPS Battery Backup Systems

1 Answer

Installation for canon pixma ip 1500

Hey you again, you rated me yesterday Inappropriate. Actually, fixya expert afraid to give some solution because you will rated us Inappropriate even the problem is came from you where you was not clearly stated your problem.

Ok, but anyway I am still to help you, Is it the problem goes to the manual installation you need or the driver instead?

Printers used to be the bugbear of computer users. They were difficult to set up and ornery in operation. That's no longer the case and it's likely you'll have no problems getting your printer up and running. This is particularly the case if your printer comes packaged with your computer system or if you stick to well-known brands such as Hewlett-Packard, Epson, Lexmark and Canon.
Connecting a printer involves four steps:
  1. Unpacking your printer, removing any packaging material and installing the ink or toner cartridge. Refer to your printer's instructions to guide you.
  2. Connecting the printer cable to the printer and to the back of your computer.
  3. Connecting the printer's power cord to a power outlet.
  4. Installing the printer driver and any additional software. The printer driver is a piece of software that tells your computer how to interact with your printer.
If your printer comes as part of your system, you may find that its driver is already installed. In that case, all you'll need to do is unpack it, connect the printer cable and power cord and switch on your computer.
geekgirl.tip: Get a cable One word of warning: Make sure you purchase a printer cable! Often, this is not included in your computer system, despite it being an essential item. You'll need the correct type of cable for your printer: If it's a USB-enabled printer, you need a USB cable (note, the new USB 2 cables work with older USB 1 printers, too; so if in doubt, get a USB 2 cable); if it's a parallel printer, you'll need a parallel cable.
Make sure you get a cable long enough to reach easily from your printer to your computer. However, you should avoid cables longer than 10', because long cables can cause problems with communication between printer and computer. Try to position your printer so a 6' (or shorter) cable can make the connection.
Follow the wizard If your printer's software has not been pre-installed, read any installation instructions that accompany your printer and follow those instructions. If no instructions are provided, follow this procedure:
(Note: This procedure applies to printers which use a parallel connection. If your printer uses a USB connection, you should connect it while Windows is running and it will be recognised.)
  1. Make sure you have your original Windows CD-ROM handy. You may need it.
  2. Switch the computer off.
  3. Connect the parallel printer cable to your computer.
  4. Connect the printer's power cord to a power outlet.
  5. Switch on the printer and the computer.
  6. In most cases, Windows will detect that you've attached a new hardware device and it will launch the Add Hardware Wizard and attempt to search for the appropriate software. If the wizard doesn't launch and Windows appears to ignore your printer, you can launch the Add Printer wizard yourself by clicking the Start button, selecting Control Panel, clicking Printers And Other Hardware, and then clicking Add Printer.
  7. If the printer is directly connected to your computer, select the Local Printer Attached To This Computer option. If you will be connecting to the printer via a network connection, select the Network Printer option, then click Next.
  8. The wizard will first try to search for any Plug and Play devices (these are components that should, by rights, automatically notify Windows when they're first connected). If the wizard discovers your printer, it will display further instructions to complete the installation. You may need to restart your system to finish.

Nov 23, 2007 | UPS Battery Backup Systems

1 Answer

Computor won't stay in sleep state.

remove the serial bus cable and reinstalled the software that came with it,itmay be infectted by virus

Nov 17, 2007 | Belkin (F6C800-UNV-PL) UPS System

1 Answer

How to install a dvd burner

First you shutdown your computer, then disconnect all power cords. I don't know if you have a tower or a deskpro, with the tower just slide the panel out pulling from the back, you may have to remove a piece from the front with a tower. Pay attension to how your cd rom is hooked up, I don't know if this is a combo (cd/dvd/RW) if it's a combo, if it is a combo you would have to take out the old drive and replace with the new, just pay attenion to how the old drive is hooked there should be two cords to connect to .  If there separate drives there should be an empty bay.  Let me know how your doing, and if I can assist you more.........Thanks, Heidi

Oct 19, 2007 | UPS Battery Backup Systems

Not finding what you are looking for?
UPS Battery Backup Systems Logo

Related Topics:

510 people viewed this question

Ask a Question

Usually answered in minutes!

Top UPS Battery Backup Systems Experts

Jax Planet
Jax Planet

Level 2 Expert

921 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Are you an UPS Battery Backup System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides