Question about Washing Machines

1 Answer

Washing machine zanussi fls 1183w

Will not spin dry

Posted by on

1 Answer

Re: washing machine zanussi fls 1183w - Washing Machines

Replace carbon bushes

Posted on Jun 18, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Washing Machine leak underneath the machine - Zanussi FLS-579C

have checked the door seal
send the 91------------- no this is on a label in the door

Feb 05, 2014 | Zanussi Washing Machines

1 Answer

My Zanussi fls 1183 is not washing the clothes, they are not completely wet and are not clean

This usually means that the drum is not rotating during wash or spin.

If this is the case the most common causes are a broken drive belt or the motor brushes worn out

Always remove the plug before investigating

Jan 22, 2011 | Zanussi Washing Machines

1 Answer

How do you remove back panel on zanussi fls-1183w so i can replace belt

you only need to remove the top of the machine but be carefull when fitting new belt

Oct 05, 2010 | Zanussi Washing Machines

1 Answer

Zanussi aquatic FLS 674 C manual

I need zanussi aquatic FLS 674 C manual and I want to know the number of its belt. thank you

Dec 29, 2009 | Zanussi Washing Machines

2 Answers

I think the bearings have gone on my zanussi aquacycle fls 1183w. can i do this myself, or do i need a new machine.

I have just done this myself and to be honest it was quite easy.
you will need bearings l replaced both front and rear as the cost of each was nothing, a new bearing seal and a drum gasket as the drum has to come apart.
Tools are a digital camera ,socket set, torx key set, set of spanners a cold chisel and a hammer. And you need the old bearings to put the new ones in

Jun 06, 2009 | Zanussi ZWF1420W Front Load Washer

1 Answer

My door handle on my zanussi fls 1183w washing machine has broken and ive bought a new handle but dont know how to get old one out can you help please

normally on zanussi doors they have 5 or 6 screws around the edge on the inside of the door if you try to undo them and take apart the door the handle should come out be carefull not to drop the glass

Nov 11, 2008 | Zanussi Washing Machines

1 Answer

I have FLS 1183W Zanussi washing machine. The drum no longer rotates and does not spin. Rgds

check motor brushes for continuity (you will need a multi-meter for that) or instead, take the brushes out and examine them. this is the usual cause

Jun 21, 2008 | Zanussi Washing Machines

1 Answer


it probabbly broke somewhere.
if it is possible to take the handle out, I would investigate the problem further.
not worth fixing the handle, you may have to get a replacement.

Mar 16, 2008 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides