Question about Epson Stylus CX3810 All-In-One InkJet Printer

Open Question

Epson stylus cx3810 won't pull paper in

My printer grabs the paper and pulls it in a little bit. when I pull the paper out the bottom right corner is a little crinkled. I have not used the printer very much, 60 pgs max. I turned the printer upside down and shook it in case something fell into it somehow. The paper is new, same stuff I have always used. If it's a mechanical problem how do I get to the problem.

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Printer Grabs corner of the paper and jams

Had the same problem, after reading this thread I hold it upside down and a quarter popped out!!!

I told my wife it was not necesary to put coins in the printer for it to work (joke, I probably threw it in by mistake).

It is a design flaw of the printer, things fall inside because people (including me) leave things on top of the scanner cover, which happened next to the paper feeder.

Posted on Feb 12, 2008

Ad
  • 4 Answers

SOURCE: Epson Stylus CX8400 Paper Jam Error

I have the same exact problem of paper half torn removed but I can not see the other half anywhere. The printer has hardly worked for at the most six pages and now showing paper jam error. How do I fix it?

Posted on Aug 12, 2008

  • 1 Answer

SOURCE: my Epson CX5800F is pulling the paper into the printer crooked

I had the same exact problem. Get a piece of fine grit sand paper run it though face up a coupe of times. It works!!! My printer now is great. A friend told me this because a printer repair person told her.

Posted on Sep 07, 2009

  • 50 Answers

SOURCE: how do i replace ink for my epson stylus cx3810

This video should help in the installation of the printer that you have...
the video supports more than one model with the one mentioned included...

If the video speed is fast just pause it to your paste...

http://www.youtube.com/watch?v=-v0mmnDZ9bA

Hope this resolves that issue...

give it a shot....got nothing to lose, but some inkjet printing to gain...

Posted on Jul 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When the paper is fed it is pulled in w/ the bottom right side of the paper going in but not the left side, it becomes uneven and ends up jamming - what would be the reason it would grab and pull the right...


The most likely cause of the problem is an obstruction on the left side of the paper path - most likely a shred of paper from a previous jam. You can estimate where to look by how far the paper goes in before it starts to twist to the side. Sometimes I've had to use a dental pick to snag a shred buried deep inside as an alternative to dismantling the printer. You may find it helpful to use a small mirror to look underneath or behind rollers while you search for the culprit.

Another possibility is one side of a dual pickup roller (two rollers on a single shaft) is worn out. That is unlikely; except for large format units most printers use a single pickup roller.

Jun 06, 2011 | Epson Stylus CX9400 Photo Printer

1 Answer

Got paper jammed pulled it out but now won't work tries but then red flashing and makes a bit of noise


-To clear a paper jam near the paper tray, grip the paper and pull it firmly but gently from the printer. If you find a stack of papers jammed, grab from the middle of the stack and pull.

-For a rear jam, remove the back of the printer. When you find a free edge on the paper, grip it firmly and pull it out.


-Press the "Resume" button or turn off the printer, and then turn it back on. Your settings should reset.

Oct 02, 2010 | Epson Stylus Photo R220 InkJet Printer

1 Answer

My epson stylus cx3810 printer prints fine from the internet or any other application but it wll not longer make a photocopy. Th paper begins as if it is starting and the printr makes noise like it is...


This was a long time ago but I hope you havent bought a new printer

You were right to think about uninstalling the printer, but you will have to follow the EPSON instruction to do it completely. I had a similar problem with mine.

Go here:

http://www.epson.co.uk/Printers-and-All-In-Ones/Inkjet/Epson-Stylus-DX3800-Series/Drivers-Support?supportLandingPage=true

Jan 25, 2010 | Epson Stylus CX3810 All-In-One InkJet...

2 Answers

Epson stlus C88+ printer: paper pulled to one side during printin


Hi

Chances are the sensor for grabbing the paper on the left hand side is defective. Try to check if there are obstructions as well

Hope this helps

May 13, 2009 | Epson Stylus C88 InkJet Photo Printer

2 Answers

Paper jam


My CX3810 started doing the very same thing. To solve the problem, I un-plugged the printer, turned it upside-down (while holding the scan-bed cover closed) and shook the printer vigorously for a few seconds. Lo and behold, a small, white finishing nail, a peanut and a ball of fluff fell out of the slot where the paper loads. I sat it down, plugged it back in.... works flawlessly again. Hope this helps.

Jul 22, 2008 | Epson CX3810 Stylus Color All-In-One...

1 Answer

Epson 3810


look in and around where the paper is fed into.there maybe a small piece of paper stuck somewhere inside. if you do see something, unplug the machine and try to pull it out with a pair of needle nose pliers. if you do get the obstruction out, try feeding the paper back in and see if it now works.
good luck.
wg

Feb 13, 2008 | Epson Stylus CX3810 All-In-One InkJet...

1 Answer

Paper feed problem


well it´s not supposed to do that - it is clearly a hardware issue
check your warranty status with the vendor

Dec 26, 2007 | Epson Stylus CX3810 All-In-One InkJet...

2 Answers

Epson Stylus CX8400 Paper Jam Error


I have the same exact problem of paper half torn removed but I can not see the other half anywhere. The printer has hardly worked for at the most six pages and now showing paper jam error. How do I fix it?

Dec 22, 2007 | Epson Stylus Photo R1800 InkJet Printer

4 Answers

Printer Grabs corner of the paper and jams


I had the same problem and what I finally noticed was that something had falled off the shelf above and lodged itself way up in the paper feed slot. It was basically invisible at first and produced the exact symptoms that you described. Unplug, hold upside down and give it a good shake. It's worth a shot.

Nov 12, 2007 | Epson Stylus CX3810 All-In-One InkJet...

Not finding what you are looking for?

Open Questions:

See all Epson Stylus CX3810 All-In-One InkJet Printer Questions

Epson Stylus CX3810 All-In-One InkJet Printer Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...