Question about Microsoft Windows XP Professional

1 Answer

Driver won't download intellinet ethernet driver os 98

I have a intellinet fast ethernet psi network card which is 98 compatible. the update device wizard won't detect the intellinet cd or floppy disk driver downloaded from the intellinet site.the pci serial controller says no driver installed after reinstall driver, code 28.The pci ethernet controller says no driver installed after i used the update device driver wizard,code 28.Is there any way to install the driver manually?

Posted by on

  • soulwax36 May 11, 2010

    If the driver don't have an installer try to use driver update and manualy specify the path to your driver

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 37 Answers

Try to manualy specify the path to your driver using driver update.

Posted on Oct 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

INTELLINET+523301+power+light+is+yellow


Try the connection directly to your pc.
If works possible solutions are :
1-The device is fry
2-Update the firmware
3-call your ISP

Feb 04, 2014 | Intellinet Network Solutions Intellinet...

1 Answer

Will windows 98 support a kingston ethernet card. if so where can i find a driver? thanks


Hi,
Windows 98 supports your kingston ethernet card.
Also you can download the driver from the link given below.

http://www.kingston.com/support/networking/downloads/knepc2.asp

Download the fourth file 110TXSI_20.EXE .

Thanks for using FixYa.

May 15, 2011 | Kingston Fast EtheRx KNE110TX...

1 Answer

I have NexxTech 10/100 FAST ETHERNET NOTEBOOK ADAPTER NCARDBUS. Where I can download driver for this device ? Thanks


http://www.nexxtech.com/nexxtech_usa.html

Go there and click Networking under products. Then click 10/100 Fast Ethernet Notebook Adapter.

Download the user guide (save it to your desktop) which will be a zip/ace file. Extract driver from inside that zip/ace file to your desktop. Then go to add new hardware or access this from going to mycomputer/device manager/'your card'/update driver and upon the installation of the driver select, "Install from location/directory." Select the driver folder, the proper OS, and then the necessary install will occur.

Jan 30, 2011 | NexxTech NCARDBUS Network Adapter

1 Answer

My gateway inside my desktop keeps disconnecting from my ethernet can you tell me what I need to do I have a Sony VAIO VGC 310 with window 7 upgrade


This computer's original OS was Windows XP. Check with the Intel Website (www.Intel.com) to see if there is an updated driver for the Ethernet Card and Chipset for the Intel Pro/100 Ethernet Driver for Windows 7. Intel has a utility you can run (follow the instructions) which will detect all your Intel Chipset hardware and provide you with updated driver information. If there is no Windows 7 driver, try using these steps to correct the issue: 1) download the most current ethernet driver from Intel and save to a folder. 2) Once the download is complete, locate the file and right click on it, click on "Properties" 3) select the Compatibility tab and set the options to run the program in Compatibility mode for Windows XP Service Pack 2. 4) A little farther down in the windows, check the box that says "Run as Administrator" 5) apply the settings and close the properties box. 6) double click the the driver file to activate its install. Follow directions and see if this helps your issue. You may need to remove the originial driver files first. To do this, Go to the Device Manager in the control panel from the start menu, Find your Ethernet adapter in the Network Adapters hardware list, right click and select "uninstall" and check the box to remove the driver files, then click okay - then reboot the machine, the run the new driver file you downloaded from Intel in compatibility mode per my previous instructions. If this doesn't solve your issue, I recommend installing a new network card that is compatible with Windows 7. Its an easy install and shouldn't cost you very much . . . less that $25.00 and should take only about 15 minutes to install. Here is a link to Netgear and their Windows 7 compatible hardware Ethernet card for about $19.00. http://www.netgear.com/Products/Adapters/WiredAdapters/FA311.aspx

Your local Wal-Mart or Target will probably have these and other brands in stock.

Hope this helps FixYa! If you find this information helpful, please leave feedback.

Apr 06, 2010 | Gateway GT4016 Desktop PC

1 Answer

My Intellinet USB ethernet converter isn't recognized by my PC. I've installed the supplied software. Is there something else I should do?


I am not familliar with this brand. It is always good advice to remove the device and drivers ... and try a second time. Make sure you follow manufacturers directions EXACTLY and that you have the latest drivers.

Is it possible that you have a USB 1 computer and a USB 2 (or 3) device?

Dec 14, 2009 | Intellinet Active Networking Intellinet...

1 Answer

Fast Ethernet Card RTL8139D doesn't work


First you will have to look which one is your card A, B,C or D appropriately you have to download your driver from the link given below the site contains all 4 they work for win 98 perfectly. http://www.opendrivers.com/driver/22925/realtek-rtl8139(a-b-c-d)-driver-6.07-win98-me-2000-xp-free-download.html

Jun 15, 2009 | Computers & Internet

1 Answer

Ethernet card losing connection


Try updating drivers. Go to device manager, then select your network card, then go to drivers tab and select update driver.

Jun 13, 2017 | Microsoft Ethernet MN-120 Network Adapter

1 Answer

Dell Ethernet Network Adapter not being recognised


i) Click on Start button ---->Select option Control Panel------>Select Network Connections----->
  a new window appears showing the "internet connections icon " Such as:

  Local Area Connection 1 or 2 or 3 and since you are not connected it will show this icon as:

eg1:  Local Area Connection 1 or 2 or 3
        Network Cable Unplugged, Firewalled
        VIA compatible Fast Ethernet  

        in this case u can download VIA network drivers....from internet..


                      or 

       eg2: Local Area Connection 1 or 2 or 3
       Network Cable Unplugged, Firewalled
       Realtek RTL8139 Family Fast Ethernet NIC

       in this u can download "Realtek RTL8139" network drivers.... from internet(which is showing              model no: RTL8139 through google search engine )


                                         (OR)


ii)        Click Start button ---->Select RUN option ----> type in the text box devmgmt.msc --->Select                Network Adapters....

           but this will show wheter ur network adapter or NIC is VIA or Realtek or......but does show the             correct Model NO: of VIA or Realtek....
  
            so i would suggest to follow the step (i)



Thanking you

M.Sridhar

   

Nov 23, 2008 | Dell Ethernet Card Network Adapter

1 Answer

Installing new Window xp and other devices didnt works


take the side of the computer off and look for the model number on your motherboard. you need to know if your using a network card or if its onboard Lan. if everything you need is onboard all you need to do is search your motherboard number on the internet and download the drivers. you need can select what you need, sound, lan etc. your goning to have to use a friends pc so you can download these files. when your Lan is installed go to the microsoft webpage and get the latest updates, that will solve the usb in your device manager

Sep 08, 2008 | Computers & Internet

1 Answer

Driver


You can download this tool(HWINFO32) and install it! http://www.hwinfo.sk/files/hw32_173.exe Plug in the USB Net Adapter then run the program (HWINFO32)!(Look under network and you should see the device there! Hopefully that points you in the right direction to go and get the driver! if that doesn't work, get back to me! Good Luck regards, babb

May 03, 2007 | Intellinet Active Networking Intellinet...

Not finding what you are looking for?
Microsoft Windows XP Professional Logo

506 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2658 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...