Question about Abit AN-M2HD Motherboard

2 Answers

Nothing happens on screen when booting computer

I just installed the motherboard and when i turn on the computer nothing happens on the computer screen. It says no connection. I am hooked up through the vga hookup. I am running a athlon amd 64x2 6000+ processor & 1g of 800mhz ddr2 gskill ram

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The processor was not locked down good. When i pulled the cpu fan up the processor was attached to it. I reinstalled the processor hooked the fan back up and it works.

Posted on Oct 08, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 138 Answers

Try cleaning the RAM like shown in the image below.nothing happens on screen when booting computer - 025c6b0.jpg
Hope this helps

Posted on Oct 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Stuck at Motherboard splash screen


your stuck at the boot from DVD, you must boot form C to finish installation.

Jul 27, 2014 | EliteGroup P4M800-M7 Motherboard

2 Answers

Motherboard DP35DP Installation Problem


You should try a regular ps/2 mouse and keyboard.  You probably don't have the USB drivers installed for the new board.  After you get booted into windows you'll be able to install those.

Oct 12, 2007 | Intel Motherboard

1 Answer

Gateway W35044LB


  1. Turn on the computer.
  2. After the Gateway BIOS logo appears, repeatedly press the F8 key. The Advanced Boot Options menu opens. If it doesn't the motherboard is most likely bad).
  3. On the Advanced Boot Options screen, use the arrow keys to select Last Known Good Configuration (advanced), and then press the ENTER key.
If that does not work, turn PC off, Do this again, but this time choose 'repair your computer' at the top.
If it still does not work, either your hard drive went bad or Windows is corrupt. Either way Windows must be re-installed.

Feb 01, 2014 | Gateway Computers & Internet

1 Answer

About an hour ago, done a Toshiba Tempro BIOS upda...


Oh dear that's the worst thing that can happen during a bios update. the bios chip is probably now useless rendering the laptop useless. You will need a new motherboard I am afraid to say.

Jul 25, 2017 | Toshiba Satellite Pro L300D-EZ1002X...

1 Answer

My system with asus p5n73-am mother board shows BSOD


if nothing else is affected and everything runs fine after this then i would be careful on what you install because this could become a serious issue this happens because the computer notices an error on startup then either fixes itself or ignores the problem write back if the problem worsens

Dec 27, 2009 | ASUS P5N73-AM Motherboard

1 Answer

I tried to install Windows XP sp2 and the windows boot screen did not show up.


Reinstall and during the install press F6 when it ask if would like to install 3rd party drivers and have the driver disk for your hard drive ready and install those when ask.once it is done it should complete the xp install and restart correctly.

Jun 01, 2009 | ASUS P5QL-E Motherboard, LGA775, Intel P43...

1 Answer

Acer daulcore processer motherboard model mcp61sm-am


ok fair enough.... boot the computer and watch the screen.... you need to watch for the key to enter setup.... delete key seems to be the most popular but i've had computers use f1 and f2, f11 and f12.... if it goes to fast hit pause as it gets to the point where it tells you the key to hit to enter setup.... after you are in change the boot sequence to boot to cdrom..... hit f10 and save the changes... reboot to the cd and continue with your install

Robert

Sep 03, 2008 | Computers & Internet

1 Answer

Hi please help me with my acer 3003 wont boot


try to power up with power cord only and see if it works. If no lights turn on than your motherboard is dead. If it turns on and nothing happens make sure there is memory installed(RAM). If it turns on and you see windows screen than it shuts off than your operating system needs to be installed again. Also, you can try booting in safe mode by hitting f8 when you initially start your computer and see if it stays on and if it does you have a virus most likely. Good luck.

Aug 18, 2008 | Acer Aspire 3000 Notebook

Not finding what you are looking for?
Abit AN-M2HD Motherboard Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Abit Computers & Internet Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

David
David

Level 3 Expert

778 Answers

Jerry Umali

Level 3 Expert

979 Answers

Are you an Abit Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...