Question about Sony KV-32XBR85 TV

2 Answers

My tv dose not turn on

My tv not turn on

color tv

Posted by on

  • 10 more comments 
  • jfs3440 Jan 01, 2008

    my tv is a SONY kv - 35xbr48 it turned off by itself and will not turn back on either by remote or power button. the fuse is good. seems like no power can you help me?

  • Anonymous Feb 14, 2008

    I have a 20" phillips non flat screen tv that will not turn back on, it shut off while my wife was watching it .

  • Anonymous Mar 03, 2008

    polaroid 32"lcd tv will not turn on

  • davebz1a Mar 16, 2008

    Hi I have a Sony KV-26V66, that won't turn on. The standby/timer LED blinks 2 short and 1 long.

  • our_meryck Mar 21, 2008

    I have a panasonic tv that will not turn on. It makes no noise at all when the power switch is switched. We checked all the obvious...(power to tv, etc)

  • Dennis McClaflin Mar 28, 2008

    I have a philips 27". model # 27PT543S37A. When I turn the power on, i Hear a clicking in the back repeatedly then it turns off. When I do get a picture about 10 to 15 minutes later of repeatedly turning the power on and off, it will stay on for a couple hours then the screen goes black.

  • CALBJ May 10, 2008

    I HAVE A PHILLIPS 27" NON FLAT TV THAT WILL NOT TURN ON....MODEL #27P6441/37

  • fred sr May 16, 2008

    I WATCHED TV THE NIGHT BEFORE THE NEXT MORNING I WENT TO TURN IT ON. IT WOULD NOT COME ON. ALL I HEAR IS A CLICKING IN SIDE THE TV. THERE IS A INDICATER LIGHT THAT FLASHES IT LOOKS LIKE IT WANTS TO COME ON EVEN AFTER I PUSHED THE ON BUTTON IT STILL FLASHES A FEW TIMES IT IS A JVC 52 IN REAR PROJECTION TV ANY HELP AT ALL THANKS

  • trudy49 Jun 08, 2008

    I have a Protron. It worked today. I turned it off. A few hours it won't come back on. This is the first time this has happened.

  • baubie Aug 13, 2008

    Citizen C20401 CRT 20" TV will not turn on from standby. Red light is on... Goes off when on/of is pressed

  • Sidor17 Sep 02, 2008

    I WATCHED TV THE NIGHT BEFORE THE NEXT MORNING I WENT TO TURN IT ON. IT WOULD NOT COME ON. ALL I HEAR IS A CLICKING IN SIDE THE TV. THERE IS A INDICATER LIGHT THAT FLASHES IT LOOKS LIKE IT WANTS TO COME ON EVEN AFTER I PUSHED THE ON BUTTON IT STILL FLASHES A FEW TIMES IT IS A JVC 52 IN REAR PROJECTION TV ANY HELP AT ALL THANKS

  • 1stchoice Sep 13, 2008

    Citizen C20401, my son broke the remote and then put on the sleep timer and now we can't do anything with it

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a sharp tv non-plasma, just the oldfashioned one, but it does not want to turn on

Posted on Feb 26, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 46 Answers

I need more information on the TV. Make, model, is it a plasma or not, ect.

Posted on Dec 24, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv has flashing on off dose not turn off or go on


Burned color bulb. They are quite expensive to replace.

Oct 18, 2013 | Televison & Video

1 Answer

Trying to hook up the vcr


Dose your tv have a red white n yellow plug in on tha back of ur tv

Sep 20, 2013 | Symphonic ST420FF 20" TV

1 Answer

Screen is turning purple and green dose this cost lots to fix?


It sounds like your tube Shadow Mask may have got magnetised and need to be degaussed.

Turn off your TV at the mains and unplug it for at least two to three hours. Longer the better. After that time power up your TV it should degauss the tube at power up.

Worth a try before you give up on it. Or else get your picture tube replaced. It may be more economical than purchasing a new television. Also try to have the picture tube of an old color T.V as modern picture tubes lacks quality when compared to older ones. But check those tubes thoroughly before buying it.

Apr 07, 2010 | Hitachi 43FDX01B TV

1 Answer

Will not converge


hello, the convergence ic's have gone bad in your tv . and sometimes they fail because of a 50 mfd @ 50v capacitor by each ic goes bad. if you have the skill at soldiering and desoldiering you may try repairing it yourself otherwise leave it to a qualified repairman. thanks .....techman...580-243-8025

Apr 01, 2010 | Apex Digital GB43HD09 43" Rear Projection...

1 Answer

Play station 2 hookup .plug up color to color done tv on ch3 done still game dose not apper on tv why


Hello,

You need to put the TV on Video Mode. Press the TV/Video button on your remote or the Input button. Toggle between the selections and it should detect the PS2.

Nov 26, 2009 | Emerson EWF2704 TV

1 Answer

This is more for information question. Dose Mitsubishi have a DLP TV that dose not use a color wheel and lamp where you can get 3D?


Yes, Mitsubishi did make a DLP that did not use a color wheel, but I am not sure if they still make it. It would be in the Diamond series and it uses 3 image units. I believe this was a professional set and was very expensive. You may have to ask around at you local electronics store to see if Mits still make this set.

I hope that this helps.
asnowman

Oct 06, 2009 | Televison & Video

1 Answer

Lamp light turns red


Yes this is the signal for a bad lamp. Other things can cause this. 1. Look at the new lamp. make sure it still looks good. not broken with little glass pieaces in it. 2. When you turn on the tv, put your ear to the lower back part of the tv near the middle. Listen for the start up of the color wheel (a low high pitch sound only at the start up of the motor). If this is good you will here a ticking sound only if the lamp dose not light.

Now with all this info. If the lamp lights (as seen from the back of the set) and goes out after a few seconds and you did not here the color wheel spin up, the color wheel is bad.

If you here the color wheel spin up and no ticking sound, the Ballast is bad.

The ballast part no. 939P978010

The color wheel is not avialable from Mits. You will have to replaced the light engine. It cost to much. Just buy a new tv.

Sep 03, 2008 | Mitsubishi WD-62327 62" Rear Projection...

1 Answer

Wd 62327


1. Look at the new lamp. make sure it still looks good. not broken with little glass pieaces in it. 2. When you turn on the tv, put your ear to the lower back part of the tv near the middle. Listen for the start up of the color wheel (a low high pitch sound only at the start up of the motor). If this is good you will here a ticking sound only if the lamp dose not light.

Now with all this info. If the lamp lights (as seen from the back of the set) and goes out after a few seconds and you did not here the color wheel spin up, the color wheel is bad.

If you here the color wheel spin up and no ticking sound, the Ballast is bad.

The ballast part no. 939P978010

The color wheel is not avialable from Mits. You will have to replaced the light engine. It cost to much. Just buy a new tv.

Jul 31, 2008 | Mitsubishi WD-62327 62" Rear Projection...

2 Answers

My tv dose not turn on


I too have the same problem. We've had the ilo27 for almost 2 years and it suddenly decided to not turn on anymore. Red light-itus.
I did find a little trick if you are not so mechanical like me and don't want to risk opening the back. I know this isn't a cure, but you CAN get around this by simply pulling the plug from the wall and plugging it back in. It comes on with remote or manually every time!!!
A little inconvenient, but a way around it temporarily!

Dec 31, 2007 | iLO V27DMBX Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75311 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...