Question about Phones
I purchased the phone yesterday, charged for 24 hours; set date, time, tried to register the handset. It shows handset #1 after charging 24 hours, Plugged phone into phone line; the base worked on speaker phone mode, but the handset wouldn’t communicate with the base. Tried to deregister the handset but it always says “out of range” . the handset is fully charged and shows full battery charged icon. Wanted to bring the set back to the shop but lost the receipt.
I’d be thankful if you could let me know how to get the handset work.
Whenever we make a call there will be a fuzzy noise on the line even before we dial any number, as well as the call never goes through. No calls can be received because of this problem. We have called the service center and they suggested that we move the lines away from the internet connection but no changes are evident. What should i do no? What suggestions do you have? It is as if the phone cannot locate a phone line at all because there is no dial tone.
MY Cordless phone is a UNIDEN DSS7955
I had the same problem!
What you need to do is hold the "end" and "#" key for 5 sec, which will deregister the headset then all you would have to do is place it back in the base for it to registered again.
Posted on May 06, 2009
Tips for a great answer:
Jul 21, 2010 | Uniden Cordless Phone
Dec 27, 2009 | Uniden Cordless Phone
Dec 06, 2009 | Uniden Cordless Phone
Apr 14, 2009 | Uniden Cordless Phone
Feb 10, 2009 | Uniden TRU9480 Cordless Telephone
Jan 15, 2009 | Uniden Cordless Phone
Dec 03, 2007 | Uniden Cordless Phone
Oct 17, 2007 | Uniden TRU8885-3HS Digital Cordless Phone
Jun 19, 2007 | Uniden TRU9480 Cordless Phone
769 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: