Question about RCA R52WM24 52" HDTV Projection Television

1 Answer

Replaced the fuse in RCA R52wm24 and resoldered the flypack now the tv power light turns on blinks three times then turns back off. We had no issues with the tv before today. Any help is greatly appreciated...

Posted by on

  • robertmiracl Oct 06, 2009

    Thank you thank you for your response. Replaced it because today while watching tv we got three colored lines, blue, red and green and the tv looked 3dish or double image and the picture was curved. After reviewing your site it identified the issue as a fuse issue and advised to replace the fuse and resolder the flyback. Could I have done the soldering incorrectly or hooked a wire back up wrong???

  • johnnydiode
    johnnydiode May 11, 2010

    Why did you replace the fuse and solder the flyback?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 647 Answers

The fuse blows when there is aproblem with the convergence board - if the TV just had issues with the convergence b4 you soldered and replaced the fuse then the set should not be dead - I would check all plugs especially the 2 flexible (short) cables that jump the (ssb) two boards together. Do you hear the HV trying to start (a little chirp sound near the flyback) If so the set is in shutdown mode if not then power supply problems are usually the cause - check for swelled capacitors in power supply.

Posted on Oct 06, 2009

Testimonial: "Amazing how you can pinpoint an issue by reading text from someone who has no idea what they are doing! Great job! It was one of the two flimsy cables"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replaced the fl231 fuse tv worked for day now blown again and tv keeps shutting off what do i check now


Resolder the flyback pins as thats what causes the FL231 fuse to blow. Soldering the flyback should solve the issue you may need to replace the fl231 again

Apr 28, 2011 | RCA R52WM24 52" HDTV Projection Television

1 Answer

The convergence on this television has obviously developed a problem. The three colors have completely separated. A picture is still visible. I attempted to apply the convergence option from the set-up...


This RCA tv model use a convergence fuse.The covergence fuse FL231 is dead.U have soldering iron,u can do basic soldering?Try Ebay.com to buy the convergence fuse for the replacement.This FL321 have three fuses,the one in the middle is dead.The FBT,the big black block of plastic,resolder that too.

Aug 20, 2010 | RCA R52WM24 52" HDTV Projection Television

1 Answer

RCA R56WH78 Green LED Blinking


Ck 3 capacitors on deflection board cp150 2200uf 16v use 25v if it is puffed up on top it is Bad other 2 are 220uf 35v cp114 cp120 resolder all pinns on FBT flyback transfomer.

Nov 12, 2009 | RCA R56WH76 Projection Television

2 Answers

Fuse keeps blowing R52 WM24 tv


you need to replace DL231, FL231 and CL230 all at the same time then resolder the flyback and vertical IC, You can get the parts under the RCA category at the following link, and they provide instructions on how to do the repair.
http://servicemanuals.vstore.ca/

Feb 07, 2009 | RCA R52WM24 52" HDTV Projection Television

1 Answer

Did you get an aswser on the IC's?


THe rca itc222 chasis has No convergence ics it uses a series of transistors to do the same. YOU replaced the Fl231 fuse and it blew. Did you resolder flyback connections. this is why the fuses blow. check out the article under the tips and tricks section written by me willtab ... see if this helps if not let me know .. i see alot of these at the shop ( i got one right now in front of me with the FL231 probelem LOL) if can let me know i give you help

Sep 15, 2008 | RCA R52WM24 52" HDTV Projection Television

1 Answer

Could I possibly have a bad flyback transformer


I would try resoldering the flyback connections on the Circuit board. if the flyback was defective it would operate and you usually get 3 blinks on the LED indicator. Sounds more like a solder issue.

Jun 15, 2008 | RCA R52WM24 52" HDTV Projection Television

2 Answers

RCA R52WM24 52 in. HDTV won't stay powered on


sounds like you have more problems than just the fuse.. did you resolder the connection when you replaced the fuse. this is what causes that to happen.. fuses blown for a reason. ussally something is shorted. that particular fuse blows because it is a very small fuse and doesent take spikes in power to well. so when a intermittant connection begins to cause ossillations it shakes that poor fuse. it however sounds like you have more than that. does the led on the front flash when it shuts down.

Apr 05, 2008 | RCA R52WM24 52" HDTV Projection Television

1 Answer

Rca r52wm24 no power on


#1 problem for this TV. Check to see if your color wheel is spinning. The lamp will not light if the color wheel is not spinning. This color wheel goes bad easily.

Feb 27, 2008 | RCA R52WM24 52" HDTV Projection Television

Not finding what you are looking for?
RCA R52WM24 52" HDTV Projection Television Logo

319 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

matt martin
matt martin

Level 3 Expert

1212 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...