Question about JVC GR-D20EK Camcorder

6 Answers

Jvc digicam gr-d370as

I cant transfer any video to my laptop using this camcorder,it seems that the usb adapter wont be able to recognize on my system,winxp service pack2, do i need to install another software for my usb connection?pls help.. asap!!

Posted by on

  • 2 more comments 
  • neiwei Dec 23, 2007

    there is no icon onthe system tray that another device had been plugged in,no icon for any new found hardware,do i need to install anything to transfer videos using a usb.

  • Anonymous Jun 16, 2008

    CANT DOWNLOAD TAPES TO LAPTOP SO I CAN BURN THEM TO CD. PLEASE HELP

  • Anonymous May 01, 2009

    jvc grd 20 tape will not eject any way of ejecting manually

  • Anonymous May 04, 2009

    i cant transfer any video to my laptop using this camcorder,it seems that the usb adapter wont be able to recognize on my system,winxp service pack2

×

Ad

6 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I HAVE A JVC GRD370 AS ITS USB NOT CONNECT TO PC HOW IT IS CONNECTED/

Posted on Aug 10, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I LOST MY DRIVER I NEED TO UPDATE VIDEO FROM HANDYCAM TO MY PC I HAVE USB CABLE I HAD ATTACH BUT I DOESNT HAVE DV CABLE HELP ME OUT

Posted on Feb 23, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I bought a firewire card I use this from the dv connection on camera but still i can,t transfer from mu cam to my computer any boudy can help me my email is noureldeen2007@hotmail.com

Posted on Aug 08, 2008

I suggest a firewire card, I use this from the dv connection on camera & had no problems

Posted on Aug 05, 2008

Dear sir, i have jvc handycam model no. GR-D370AS . and i need DV cable of it .please suggest me how to purchase it. my mail address is jrbaghel@yahoo.co.in.please suggest me for that.
Thanks

Posted on Jun 09, 2008

Hjjhj

Posted on Jan 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

SONY DSR PD 170 OR 170P IS THE CAMERA MODEL AND LAPTOP IS SONY VAIO VPCEG18FG. The camera has a DV firewire port and lap top has only 3 usb ports. I tried connecting it with a cable that ha s firewire...


This Camcorder does not support USB streaming with the Windows 7 Operating System. Use an i.LINK cable to transfer the video to the Computer. The i.LINK port is also called IEEE 1394 or Firewire port.You can use any video capturing software like Windows Movie Maker to transfer the video from the Camcorder to the Computer.The Firewire to USB cable won't work with your camcorder,you will always end up with this error.
Click the link below for the instruction to transfer the video to the Computer using i.LINK cable.
>> http://www.kb.sony.com/selfservice/documentLink.do?externalId=C111893
You Sony vaio laptop doesn't have firewire ports ,in this case you will need to purchase and install an firewire card ..>>
see link >>
http://www.ramelectronics.net/computer-parts/computer-accessories/firewire-i-link/firewire-cards/29972/prod29972.html

If you are using a Windows XP Operating System then you have to install the USB Streaming Driver in the Computer from the supplied Software disk with the Computer.
Check this Link for the instruction to transfer video to a Computer using USB Streaming.
http://www.kb.sony.com/selfservice/documentLink.do?externalId=C222820
If you do not have the supplied Software disk then I suggest that you use the i.LINK cable to transfer the video.
Please let me know if you need further assistance on this issue .

Nov 13, 2011 | Video Cameras

1 Answer

I cant download my DCR-TRV250 Digital 8 videos to my computer. I tryed on Win 7 and Win XP, with or without Sony drivers... But no computers recognize my cam. Also I looked for help on Sony eSupport, but...


From the Sony support page for this camera, it has the following:
  • Drivers:
    • The drivers needed to connect your Sony camcorder to a computer and transfer files are already included in the operating system.
  • Not Supported:
    • The USB streaming feature is not supported with the Windows 7 operating system.
    • The Windows 7 Starter edition is not supported.

From the user manual page 184, they explain how to connect a iLink (IEEE 1394) cable from the camcorder to your computer. Since "USB streaming feature is not supported with Windows 7" as stated above, you now how to retrieve your video using the iLink connection instead.
Unfortunately, the camera does not come with an iLink cable, so you have to buy one. Additionally unfortunate is the fact that many computers do not have a IEEE 1394 connector to use with the iLink cable. As a result, you have to buy an adapter card for your desktop computer or hope that your laptop has a built-in IEEE 1394 port.
Once you get the iLink to IEEE 1394 issue resolved, you can then use the software provided by Sony or any DV capture software to download high quality copies of the video from your DCR-TRV250.





Dec 30, 2010 | Sony Handycam DCR-TRV250 Digital Camcorder

1 Answer

How can I get Windows 7 Movie Maker to recognise input from my Sony DCR TRV18E Handycam?


On page 230 of the user manual, it describes how to transfer movies from the camera to a computer using an i.Link (IEEE 1394) cable. You will need the 4 pin i.Link cable and an IEEE 1394 connector on your computer in order to do this. You cannot use the USB cable to transfer the video from this camcorder -- you can only transfer still images using the USB cable.
You will have to buy this i.Link cable and (if you don't have a IEEE 1394 port on your computer) a IEEE 1394 adapter card for you desktop computer. If your laptop computer doesn't have a IEEE 1394 adapter, then you're pretty much out of luck.
Once you have the i.Link and 1394 issues resolved, then Movie Maker should then recognize the camera.

Dec 27, 2010 | Sony Handycam DCR-TRV18E Mini DV Digital...

1 Answer

When i plug my camcorder in to the computer via the usb its not recognised and the on screen menu tells me to plug in an ac adapter


Some camcorders require you to have the ac adapter plugged in to keep your camcorder on so that you wont loose any data if the camera dies during the transfer to computer process. You can check the Panasonic website for up to date drivers for the operating system you are using. I hope this helps.

Sep 06, 2010 | Panasonic Video Cameras

1 Answer

DCR-HC38 computer not recognizing camera


Option 1:

If you want to use the USB cable to connect the Camcarder to the Computer to transfer the video to the Computer then:

(Applicable for Vista Operating System Only.)

This Camcorder does not support USB streaming with the VISTA Operating System. Use an i.LINK cable to transfer the video to the Computer. The i.LINK port is also called IEEE 1394 or Firewire port. (An i.LINK is a black D shaped connector with 4 or 6 pins. The type of cable to be used will depend on the i.LINK port of your Computer. The Sony Camcorder will have the 4 pin i.LINK cable and if the computer has the 6 pin i.LINK port, then you may have to use the 4 pin to 6 pin i.LINK Cable).

You can use any video capturing software like Windows Movie Maker to transfer the video from the Camcorder to the Computer.

Refer this Link for the instruction to transfer the video to the Computer using i.LINK cable.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C111893


NOTE: As the Camcorder does not support USB streaming with Vista, it is not required to use any Sony Device Driver to transfer the video to the Computer. You do not require any Drivers or Software from Sony to transfer the video from the Camcorder to the Computer using the i.LINK/Firewire interface.

Option 2:

(Applicable for Windows XP Operating System only):

If you are using a Windows XP Operating System then you have to install the USB Streaming Driver in the Computer from the supplied Software disk with the Computer.

Check this Link for the instruction to transfer video to a Computer using USB Streaming.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C222820

If you do not have the supplied Software disk then I suggest that you use the i.LINK cable to transfer the video.


Good Luck!!!!!!!!!!!!

Sep 28, 2009 | Sony Handycam DCR-HC38E Mini DV Camcorder

1 Answer

Camcorder SONY DCR-TRV25E, COMPATIBILITY window vista


If you want to use the USB cable to connect the Camcorder to the Computer to transfer the video to the Computer then:

(Applicable for Vista Operating System Only.)

This Camcorder does not support USB streaming with the VISTA Operating System.

Use an i.LINK cable to transfer the video to the Computer. The i.LINK port is also called IEEE 1394 or Firewire port. An i.LINK is a black D shaped connector with 4 or 6 pins. The type of cable to be used will depend on the i.LINK port of your Computer. The Sony Camcorder will have the 4 pin i.LINK cable and if the computer has the 6 pin i.LINK port, then you may have to use the 4 pin to 6 pin i.LINK Cable.

You can use any video capturing software like Windows Movie Maker to transfer the video from the Computer using i.LINK cable.

Refer this link for the instruction to transfer the video to the Computer using i.LINK cable.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C111893

NOTE: As the Camcorder does not support USB streaming with Vista, it is not required to use any Sony Device Driver to transfer the video to the Computer. You do not require any Drivers or Software from Sony to transfer the video from the Camcorder to the Computer using the i.LINK/Firewire interface.

(Applicable for Windows XP Operating System only):

If you are using a Windows XP Operating System then you have to install the USB Streaming Driver in the Computer from the supplied Software disk with the Computer.

Check this link for the instruction to transfer video to a Computer using USB Streaming.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C222820

If you do not have the supplied Software disk then I suggest that you use the i.LINK cable to transfer the video.

If you are using an i.LINK cable then:

The Camcorder will flash the DV IN message as soon as the i.LINK/Firewire cable is connected to the Camcorder.

If you are getting the DV IN message then it indicates that the Camcorder recognize the connection.

If you are not getting the DV IN message as soon as the i.LINK cable is connected with the Camcorder then the issue may be with either the Camcorder or with the i.LINK cable.

Try resetting the Camcorder or try with different i.LINK cable. Locate the RESET button behind the LCD screen of the Camcorder. (You will be able to locate the RESET button by opening the LCD Screen. The Camcorder should be switched ON when you reset the unit. Press the RESET button using a sharp-pointed object).

NOTE: Resetting the Camcorder will reset the settings of the Camcorder to the factory settings including date and time. It will not delete any data saved in the Camcorder.

If the issue still persists after resetting the Camcorder and with different i.LINK cable then your Camcorder requires service to resolve the issue.

Good Luck!!!!!!!!!!!!!!!

Sep 20, 2009 | Sony Video Cameras

1 Answer

Can't upload to my laptop!


Option 1:

If you want to use the USB cable to connect the Camera to the Computer to transfer the video to the Computer then:

(Applicable for Vista Operating System Only.)

This Camcorder does not support USB streaming with the VISTA Operating System. Use an i.LINK cable to transfer the video to the Computer. The i.LINK port is also called IEEE 1394 or Firewire port. (An i.LINK is a black D shaped connector with 4 or 6 pins. The type of cable to be used will depend on the i.LINK port of your Computer. The Sony Camcorder will have the 4 pin i.LINK cable and if the computer has the 6 pin i.LINK port, then you may have to use the 4 pin to 6 pin i.LINK Cable).

You can use any video capturing software like Windows Movie Maker to transfer the video from the Computer.

Refer this Link for the instruction to transfer the video to the Computer using i.LINK cable.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C111893

NOTE: As the Camcorder does not support USB streaming with Vista, it is not required to use any Sony Device Driver to transfer the video to the Computer. You do not require any Drivers or Software from Sony to transfer the video from the Camcorder to the Computer using the i.LINK/Firewire interface.

Option 2:

(Applicable for Windows XP Operating System only):

If you are using a Windows XP Operating System then you have to install the USB Streaming Driver in the Computer from the supplied Software disk with the Computer.

Check this Link for the instruction to transfer video to a Computer using USB Streaming.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C222820

If you do not have the supplied Software disk then I suggest that you use the i.LINK cable to transfer the video.


Your Camcorder does not supports a Wireless MIC. However, you can use a MIC with your Camcorder using the available Accessories Shoe port.


Good Luck!!!!!!!!!!!!!!!

Sep 18, 2009 | Sony Handycam DCR-PC110 Mini DV Digital...

1 Answer

Cant transfer videos to pc


Option 1:

If you want to use the USB cable to connect the Camera to the Computer to transfer the video to the Computer then:

(Applicable for Vista Operating System Only.)

This Camcorder does not support USB streaming with the VISTA Operating System. Use an i.LINK cable to transfer the video to the Computer. The i.LINK port is also called IEEE 1394 or Firewire port. (An i.LINK is a black D shaped connector with 4 or 6 pins. The type of cable to be used will depend on the i.LINK port of your Computer. The Sony Camcorder will have the 4 pin i.LINK cable and if the computer has the 6 pin i.LINK port, then you may have to use the 4 pin to 6 pin i.LINK Cable).

You can use any video capturing software like Windows Movie Maker to transfer the video from the Computer.

Refer this Link for the instruction to transfer the video to the Computer using i.LINK cable.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C111893

NOTE: As the Camcorder does not support USB streaming with Vista, it is not required to use any Sony Device Driver to transfer the video to the Computer. You do not require any Drivers or Software from Sony to transfer the video from the Camcorder to the Computer using the i.LINK/Firewire interface.

Option 2:

(Applicable for Windows XP Operating System only):

If you are using a Windows XP Operating System then you have to install the USB Streaming Driver in the Computer from the supplied Software disk with the Computer.

Check this Link for the instruction to transfer video to a Computer using USB Streaming.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C222820

If you do not have the supplied Software disk then I suggest that you use the i.LINK cable to transfer the video.

Option 3:

If you are using an i.LINK cable then:

The Camcorder will flash the DV IN message as soon as the i.LINK/Firewire cable is connected to the Camcorder.

If you are getting the DV IN message then it indicates that the Camcorder recognize the connection.

If you are not getting the DV IN message as soon as the i.LINK cable is connected with the Camcorder then the issue may be with either the Camcorder or with the i.LINK cable.

Try resetting the Camcorder or try with different i.LINK cable. Locate the RESET button behind the LCD screen of the Camcorder. (You will be able to locate the RESET button by opening the LCD Screen. The Camcorder should be switched ON when you reset the unit. Press the RESET button using a sharp-pointed object).

NOTE: Resetting the Camcorder will reset the settings of the Camcorder to the factory settings including date and time. It will not delete any data saved in the Camcorder.

If the issue still persists after resetting the Camcorder and with different i.LINK cable then your Camcorder requires service to resolve the issue.

Good Luck!!!!!!!!!!!!!!!

Sep 17, 2009 | Sony DCR-TRV285E Digital-8 Digital...

2 Answers

Hi8 to Computer for editing


I usbg-vx3.jpg






Color: Black Part No.USBG-VX3 VISTA COMPATIBLE USB Video Adapter USB 2.0 Audio/Video Grabber S-video& Composite
AUDIO AND VIDEO GRABBER FOR WINDOWS VISTA GrabBee X+ USB 2.0 Audio/Video Grabber New Generation USB2.0 Audio/Video grabber is the best ideal companion for your portable audio/video application. Real-time MPEG 1/2/4 recording make you have powerful video application on hand. GrabBeeX+ USB 2.0 A/V Grabber is the bridge between your computer and analog camera, VCR, camcorder or other video source. GrabBeeX+ USB 2.0 Video Grabber is small enough to fit in the palm of your hand and is ideal for both notebook and desktop computers. Applications : Video recording & editing Take photo Video email Security monitoring system Features : Small Wonder--Dimensions are (L)81mm x (W)30mm x (H)15mm Audio and video go though USB 2.0 bus (WinXP) to make best performance High speed USB 2.0 data transfer rate for best video recording Encoding MPEG 1 or MPEG 2 format directly use InstantMPEG Technology, Ideal formats for creating VCD or DVD movies Up to 25 fps motion capture capability at 720x576(PAL) & 30 fps at 720x480(NTSC) SnapShot function support Composite, S-Video analog input, NTSC, PAL and SECAM multi system support Recording period setup Composite, S-Video analog input, NTSC, PAL and SECAM multi system support Support Brightness, Contrast, Hue, Saturation, Sharpness control Powerful video editing function include Motion Video Special Effects/ Title Effects/ Picture-in- Picture Effects/ Slow & ast Motion Video Effects/ background music/?color background/ Transitional Effects Plug & Play Low power consumption. Ideal for portable computer too No Battery---No need to install batteries or run off the wall adapter
  • Specifications : Video input : One RCA composite, One S-Video.
  • Video system : NTSC, PAL and SECAM multi system support Audio input : in WinXP, go through USB; in Win2000, go through sound card
  • Motion capture : AVI format from 160x120 to 720x576 resolution MPG format from 320x240 to 720x576 resolution Still image capture : BMP/JPG/TIF/PCX/TGA file format
  • Performance : Up to 25 fps at 720x576 for PAL, 30fps at 720x480 for NTSC Power Source : 5VDC,300mA(max) through USB port Minimum System
  • Requirements : USB 2.0 equipped computer Pentium 4 1G or above 128MB of RAM Windows 2000/XP Sound card
  • Package Contents :
  • GrabBeeX+ USB 2.0 Audio/Video Grabber
  • GrabBeeX+ drivers CD
  • Ulead VideoStudio editing software
  • User's manual
    I have heard this works, going to try one today, I have tried EVERYTHING else, downloading drivers, diffferent programs, firewire cords, so I think this will work, when I googled our specific camcorder, this matches, also, some people are selling the exact sony camcorder on ebay with this included, stating they have used it to connect to their pc. Hope this helps.

  • May 06, 2008 | Sony Handycam CCD-TRV608 Camcorder

    2 Answers

    Cannot transfer video to Laptop computer through USB


    try getting a ExpressCard or if you have a later modle try a CardBus that has firewire then use a firewire cadle to transfer the video

    Mar 11, 2008 | JVC GR-D290 Mini DV Digital Camcorder

    Not finding what you are looking for?
    JVC GR-D20EK Camcorder Logo

    790 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top JVC Video Cameras Experts

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    Steven Wander
    Steven Wander

    Level 3 Expert

    593 Answers

    Marvin
    Marvin

    Level 3 Expert

    82331 Answers

    Are you a JVC Video Camera Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...