Question about Toshiba e-Studio120 Copier

1 Answer

My E-Studio will not print. I get a flashing E and 1 alternately. my manual does not say what the problem is, it just says to call for help. David

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 78 Answers

E01Leading edge of paper not reaching the fuser exit sensor
(Paperjam inside the copier)

Posted on Oct 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon 600ex-rt only fires in full power, no ETTL or variable power?


  • Is it connected to the camera hotshoe?
  • Is it off camera being fired the camera wireless?
  • Is it fired using some type of wireless trigger such as Pocket Wizard and their ilk?
  • Have you tried manual mode? Doing so may give you an idea what is occurring.
  • Are you shooting in a studio or outside? If in a studio maybe the eTTL thinks it needs more power than what you think it does.
99.99% of my flash shooting manual, not eTTL. Why, eTTL is much to inconsistent.

If none of that helps you please call Canon:
1 (800) 652-2666
Hours:
Monday-Friday 8:00 a.m. - 12:00 midnight. EST,
Saturday 10:00 a.m. - 8:00 p.m., excluding holidays
For additional support options: www.canontechsupport.com

Sep 29, 2014 | Canon Speedlite 600EX-RT 5296B002 Norman...

1 Answer

I AM GETTING ERROR ON STUDIO 520 IS CF70


[CF70] New toner transport motor abnormality (1) Check if the transport auger and paddle are not locked (no extraneous material or toner clod in
both the toner transport sections at the cleaner unit).
(2) Is the new toner transport motor disconnected?
(3) Check if the connector of the LGC board and connector Pins are not disconnected.
(4) Replace the new toner transport motor.
(5) Replace the LGC board.

-David.

Nov 03, 2010 | Toshiba COPIERS E-STUDIO 520 Copier

1 Answer

I purchasing this flash from b & h and want to know if it will sync with my studio lights slave function so both flashes will be fired at the same time? I figure I'll have to use the camera in manual...


Presuming you bought a shoe-mount flash for your Sony A900 and set the camera and flash to manual so there's no pre-flash to prematurely trigger your strobes, and presuming your studio lights have built-in optical slaves, you should be all set.

Henry Posner
B&H Photo-Video

Oct 10, 2010 | Cameras

2 Answers

I have a Toshiba e-studio 150 copier. L-1 error code flashing


hi there is problem L-1 means that u have problem CCD MCU Harness Disconnect

May 12, 2010 | Toshiba E-Studio 161 Copier

1 Answer

I used to get the photo imaging studio.now it shows an error.


I assume the"studio" is included with the printer? A complete uninstall and reinstall of the printer drivers and program will probably correct this. Remember to restart the computer after the uninstall. It may be recommended to do the install with Antivirus disabled... check your manual.

Jul 16, 2009 | Lexmark All-in-One Printer with PictBridge

1 Answer

Double sided printing with Toshiba Studio 3510c series


In the middle of the main screen (in copy mode) there is a big button called "simplex 1 to 1" or it may say "duplex". on the next screen you'll see different ways to do duplex copies. if you have a double sided original then select 2 to 2 / if you have 2 single side originals then select 1 to 2. Place originals in the document feeder and press start

Apr 07, 2009 | Toshiba Office Equipment & Supplies

2 Answers

Error code H2 on screen


Hello sir; H2 code require reset procedure as follow;
1, press "#", "interupt", "c", "interupt" these 4 keys.
2, enter 14 then press start.
3, turn power off and back on .

Jan 28, 2009 | Toshiba e-Studio 161 Copier Copier

4 Answers

Dell 3010cn Not Picking from MPF


When you go to print are you selecting the MPF as the location to print? I have the 3110cn and you must manual select that you want it to print to the MPF.

Feb 15, 2008 | Dell 3010cn Laser Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

didi2005

Level 3 Expert

643 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

Branko Djurdjevic
Branko Djurdjevic

Level 2 Expert

103 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...