Question about Mitsubishi VS-60805 60" Rear Projection Television

1 Answer

All colors are out of alignment. It is fine but after watching it for about 20 min. It will fall out of alignment

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 3,459 Answers

The most likely cause is shorted convergence chips and possibly a few pico fuses.

These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony,Samsung,JVC,Philip Magnavox,Panasonic,Akai,PioneerAll colors are out of alignment. It is fine but - 2_bing.gif Hitachi,Mitsubishi,Zenith and others.
You can get a convergenece repair kit with instructions from the links below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2
Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

You can see some more examples and find a fix herebb0cf99.png http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Posted on Apr 18, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tissot Touch extreme stopped after a minor fall


may need to be reset, re instal battery. battery life is 4 yrs.

Apr 01, 2012 | Tissot T-Touch T33759851

1 Answer

Industrie Watch IN011M3 falls behind when wore


Send it back to the maker.

If you haven't got their address, look them up on the net.

Mar 31, 2010 | Watches

1 Answer

What is cnveyance setting for


Convergence setting is made to align the three color tubes to get the best possible image. The "wobble" that you mention is the begining of a convergence problem and the IC's that control convergence will need to be replaced - costs $200-$400

Oct 07, 2009 | Toshiba 42H81 42" Rear Projection...

1 Answer

Rca r52wh74 - no auto convergance


The model number of your TV probably falls under the ITC-222 chassis design. Do a search based on that criteria and it should point you in the right direction. If I remember right, you need to replace FL231 on the deflector board though. Good luck
Dave.

Jun 03, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Picture alignment is off and the bottom and top are cut off


That guy explains the different adjustments on a T.V.
I'm not sure if you want the colors aligned of the general heightwidth adjustment.

http://www.youtube.com/watch?v=nz5BBic44hk

Be sure to watch this also,shows how to safely discharge your set, it's a safety precaution that can't be overlooked.
http://www.youtube.com/watch?v=WX43sT0hMJk

Feb 21, 2009 | Sanyo DS20425 20" TV

1 Answer

Colors are separated on the top from the left to right


Probably the color convergence is off. I had a similar problem. Have you tried the magic focus button yet? That is located at left in the small front control panel. Power on TV, wait 20 min (according to user guide), then press the magic focus. If that doesn't fix the problem, you could try the service mode alignment procedure. But that's a little trickier. I don't have a link handy for that procedure right now, but will look for it if magic focus doesn't re-align your color convergence.

Jan 02, 2009 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

Clear picture is gone looks like watching a 3-d movie without glasses


sorry i am new at this but have had the same problem with a toshiba and it was the IC chips which control the converigence which is lining the colors back up

or it just may be as simple as converiging the colors in your case if you have not trided to yet

Aug 08, 2008 | Hitachi 55FX48B 55" Rear Projection...

1 Answer

Convergence


Projection TV sets have several common problems listed below.

Problem #1) Convergence

Symptoms:

  • Screen Looks 3-D
  • Colors wont align
  • Screen may look distorted
  • No Audio/Video - makes a chirping sound.
Example Photo:
5f6e85c.jpg
Problem #2 CRT Fluid has clouded over.

Symptoms


  • Dull Video, Washed out
  • White/Bright looking video
  • Halos around objects
  • Red/Orange looking
Example Photo:
ee1ca68.jpg

You can see more examples and find a fix here...

bb0cf99.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Mar 13, 2008 | Philips 55PP9352 55" Projection Television

1 Answer

Watch stops sometimes and then restarts


If it's new, then just take it back to where you got it. There is no way your warranty can run out in a week.

Oct 10, 2007 | Casio Edifice EF106D2AV Wrist Watch

Not finding what you are looking for?
Mitsubishi VS-60805 60" Rear Projection Television Logo

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1212 Answers

The Knight
The Knight

Level 3 Expert

74383 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...