Question about HP Laserjet M2727nf Multifunction Printer

1 Answer

Our HP laserjet M2727nf does not feed the paper to print anything

No matter what is tried, copies to faxes....... We can't get the paper to feed into the machine to print.

Posted by on

  • 1 more comment 
  • misty_dw_408 Oct 06, 2009

    Well I did try your suggestion but unfortunately i have realized that the actual rollers that pick up the paper out of the tray seems to be off gear and isn't engaging to pick the paper up at all. So now this poses a whole new set of problems.....No warranty and cost more to send it than to buy a new one......OHHHH BOYYYY my boss should be happy about this one.

  • charles602 May 11, 2010

    Look at the leading edge of the top sheet of paper in the paper tray. Do you see a smuge mark?

  • Taniela Matai
    Taniela Matai May 11, 2010

    is it a new machine..



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • HP Expert
  • 217 Answers

Just clean paper pick up roller whit wet cloth or can do this for ADF pick up rollers too if someday have the same problem whit ADF. Good Luck!

Posted on Oct 06, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

HP Laserjet M2727nf 's scanner

If the problem is ALWAYS, can be caused by an error in the configuration of the white paper size. That is, the printer has a conflict of comparing the original document size and the size of the white paper.
If the paper has left marks from objects obstructing the paper path. This alone can resolve the paper feeding disarm until you check that the sensors are free of obstructions.
You can also clean and well make sure they are free of any problems and ensure that the paper path goes smoothly.
Try also check the good condition of the rubber paper feed, paper separation and drag.

Feb 08, 2012 | HP Laserjet M2727nf Multifunction Printer

1 Answer

My laserjet m2727 says load paper when in fact the letter tray is full

Be sure the tray is lifting when inserting it. Also if it says this after it attempts to feed then try cleaning the feed rollers. Also be sure that the sensor flag is not broken.

Jul 14, 2011 | HP Laserjet M2727nf Multifunction Printer

1 Answer

I have an HP laserjet m2727 mfp series 4 in 1 multipurpose that can only print and recieve fax. What would be the problem? Please help me.

The detail isnt clear.

But if your machine doesnt do copies, scan or send faxes it would seem that ther is a problem with the scanner unit on your machine, Lift the ADF unit (as if you wer to do a copy from the glass) keep the lid open so you can see the scan unit, do a copy and check if the scanner unit moves and check if the bulb is burning.

These machines are notorius for dodgy formatter boards.

But i would start with checking the scanner unit.

Feb 18, 2011 | HP Laserjet M2727nf Multifunction Printer

1 Answer

Received fax only prints top half of page

make sure the paper size is set correctly.......

Dec 29, 2010 | HP Laserjet M2727nf Multifunction Printer

1 Answer

Feeder does not pick up papers. The display window shows ADF door open. Therefore, I can not print copy or receive faxes.

Try doing an nv ram ( turn off the printer and hold down the right arrow and the cancel button, turn the printer back on and continue holding until you see permanent storage init). If this doesn't work call hp tech support 1800 334 5144 and ask for a case number. This printer has a service note which will cover the formatter for 2 years.

Jan 07, 2010 | HP Laserjet M2727nf Multifunction Printer

1 Answer

Printer problem

either a bad formatter or dc controller.

Sep 30, 2009 | HP M2727NF Laserjet Printer

1 Answer

HP PCL5c paper source options for HP M2727

you will find it here

HP LaserJet M2727 MFP Series
HP LaserJet M2727nf MFP HP PCL5/PCL6 N hppcl5.pdt
*HP4000 Y Y Y ? PostScript 3 emulation N n/a n/a

Jun 16, 2008 | Office Equipment & Supplies

1 Answer

Paper crinkles for fax or copies

either your feed rollers are bad or there is a piece of paper stuck

Dec 05, 2007 | HP LaserJet 3030 All-In-One Printer

Not finding what you are looking for?
HP Laserjet M2727nf Multifunction Printer Logo

Related Topics:

1,113 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

1089 Answers


Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides