Question about Frigidaire Dryers

2 Answers

PLEASE HELP! Dryer cuts off and gives an E68 code.

I have a Frigidaire Gallery Series front loading dryer and it keeps giving me an error(?) code, E68. When I start the dryer, it runs for a couple of minutes and then It starts beeping and flashing this code and finally cuts off and all the lights start blinking randomly. Not to long ago the light bulb inside burnt out, but I can't imagine that this is contributing to the problem. Please help, me clothes are mildewing.

Model # GLGQ2152ESO
Serial # XD71002541
Date: 03/07

Posted by on

  • Anonymous Mar 22, 2014

    Does someone know the procedure to free a stuck push button? My FEQ1422ES1 has a stuck dryer heat select push button. E68 was the error code, during the push button test it did not beep, and I am unable to change the drying mode by pressing the button (High, Normal, Low, No Heat). However, the dryer works. It just beeps randomly and sometimes 4 status lights flash on the far right.

  • Juan Ramirez
    Juan Ramirez Dec 13, 2015

    please try the following:
    Hi friends, I fixed my dryer some time ago by adding a 1/2 watt 10kohm resistor to the dryness button to ground as a pulldown to ground, usually read 19kohms in that input, after perform the button tests you will see that the dryness button is not working, and after soldering the resistor you just need to clear the error flag and will work as expected. any more questions write to jramireztoscano@gmail.com

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,197 Answers

E68 code

this is a fault code that means there is a stuck key on the board you may have to remove the control panel and check the keys if this does not work you may have to replace the panel or control board

Good luck

Posted on Oct 05, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Fridgedaire is P.O.S. Solution, replace it.

Posted on Jul 30, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is Frigidaire gallery dryer code e68


I appreciate your post, friend!

From what you have described your Frigidaire dryer is showing a "E68" error code. "E68" usually indicates that one of the keys (buttons) is stuck closed (active). You may enter "Function Test Mode" and perform Key Test to determine which button is at fault. To perform the "Function Test Mode": Press and hold the START and CANCEL button at the same time for 10 seconds. The stuck key should blink. Carefully free the key and perform the test again after proper diagnosis. If button is free but the error code still exists, the electronic control will more than likely need replacing. If you do not have a professional connection, you have the option to visit the manufacturer website to find a service provider in your area. Hope this helps! -Matt

Feb 13, 2015 | Frigidaire Dryers

1 Answer

Dryer gallery series e68


Good Morning Friend,

I understand you want to know how to replace the board on your Frigidaire dryer, model# GLEQ2152ES, due to receiving an E68 code. Typically, this is not a do it yourself repair, as there are no step by step instruction manuals. I suggest contacting your local authorized technician for further assistance. They have been trained on your particular appliance, and should be able to replace the board with ease. Hope this is helpful.

-Best Regards-
WP

Jun 27, 2014 | Frigidaire Dryers

1 Answer

I have a Frigidaire Affinity Clothes dryer manufactured in 05/07 that is displaying a code E68 after in runs for just a few minutes. Any idea what could be causing this?


The error code E68 means a key or button is stuck. Check the buttons by pressing them one at a time to find the stuck one or enter the service diagnostic mode then the key function test. Click on the link below for the detailed instructions.

Troubleshooting Error Code E68 on Frigidaire Affinity and Gallery Dryers

Mar 06, 2011 | Frigidaire Electric Dryer

1 Answer

The dryer is shutting off and showing an E68 error code.


Hello,

Welcome to FixYa.


The E68 is indicating a push button is stuck, refer to this chart below for explanation and potential remedy.

macmarkus_361.jpg


Let me know how you make out or if anything is not clear and I'll help in whatever manner I can going forward. Good luck.

Regards,

Macmarkus :)

Feb 27, 2011 | Frigidaire GLTF2940E Gallery 3.5 Cu. Ft....

1 Answer

Have a Frigidaire Gallery Series front loading dryer and it keeps giving me an error(?) code, E68. When I start the dryer, it runs for a couple of minutes and then It starts beeping and flashing this code...


Sorry to read about your problem. this should be your E68 problem

You have a defective button on the control board.
The best thing to do is go into the diagnostic mode.
Turn the dial to Normal. Press and hold the Select and Pause/Cancel keys for 6 seconds, or until the Drying/Cool Down/Press Saver/Clean Lint Filter lights come on.
Then press the Start and Pause/Cancel Buttons 4 seconds. This puts you into the diagnostic mode to check the keys. Now, turn the dial 4 O'clock position, or 75. This will allow you to check all your buttons. As you press each key, it will light all the lights above it. When you press a key and it does nothing or the lights above any certain key stays on without pushing it, this button is stuck. If you can't clear it, you probably have to replace the control board.

I tried to help you. Please help me and Vote/Rate this response. Thanks and good luck

Dec 21, 2010 | Frigidaire Dryers

1 Answer

The dryer gives E68 it starts running dor 30


the code 68 on the aeq7000es series is indicative of stuck buttons [your control buttons on the front]They sometimes stick in the closed position or go open [fail] and I have found the bad switch and replaced just the bad switch[ there should be a series of test to determine which switch button is bad] and if the switch buttons are testing good ,then it's control panel time. The control panels are about $150.00 on ebay ,sometimes you can find a "make offer" deal,but their few and far between.

Nov 18, 2009 | Frigidaire AEQ7000ES Dryer

1 Answer

My Frigidaire Electric Dryer keeps giving an error code


If your dryer is the same or similar to mine (Model AEQ6000ES2) then error E68 is a stuck key on the keypad. This may be mechanically stuck or the membrane contacts. The simple solution is to replace the keypad.
I found this information by searching for "Frigidaire Model AEQ6000ES2"

Mar 23, 2009 | Frigidaire Electric Dryer

1 Answer

Dryer door problem


Most likely the door lock is bad, check the wire connections to make sure thay are connected. If so replace the door lock assembly.

Jan 07, 2008 | Frigidaire GLTF2940ES Front Load Washer

16 Answers

Frigidaire Affinity dryer error code?


HELLO,
I HAVE A FRIGIDAIRE AFFINITY DRYER (AEQ6000CE32). WHENEVER I PUT THE CLOTHES IN IT JUST SPINS FOR 10 TO 15 MINUTES AND SHUTS OFF BEFORE THE ALLOTTED TIME. THERE IS NO HEAT IN THE DRYER. ANY SLOUTIONS?

Sep 16, 2007 | Frigidaire Affinity ATF7000ES Front Load...

Not finding what you are looking for?
Dryers Logo

Related Topics:

1,687 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

76691 Answers

Are you a Frigidaire Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...