Question about Apex Digital LD3249 LCD TV
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There is a issue with Apex Digital LD3249 TVs. I too want to program to a universal remote, but am unable to do it with a Philips brand universal remote. I am going to try another brand. I have heard that some of the universals out there are old enough and does not support the newer made TVs. BH
Posted on Jan 15, 2010
You can power scan for the code.
Turn ON the electronic device you want to program the remote to control.
Press the Mode button( sat,tv,dvd,aux) on the remote until the appropriate mode light is flashing.
Press the Power button. The mode light will stop flashing and stay lit.
Press the Up or Down arrow button to set the remote to the next code. The Down arrow button scans backward and the Up arrow button scans forward.
When the correct code is reached, the device (whether a TV, VCR, or other) will turn off.
Press the pound key button to store the code in the remote control memory. If the code is valid for your remote, the mode light will blink 3 times.
Turn the device back ON by pressing the Power button.
Press sat mode key once you power back on the tv to be able to operate the receiver box.
Try some other functions to make sure you have the correct code. Occasionally the Power button may work when others do not.
If the other buttons work you are finished.
If the other buttons do not work, repeat the previous steps. The scan will resume from the last code stored.
The mode light will flash rapidly when the scan has returned to the starting point and all codes have been tested for that mode. The remote control may not control some device models.
Posted on Jul 06, 2010
SOURCE: Apex LD3249 LCD tv.picture jumps
The tv Tuner board,that where the coalax broscast signal come in is dead.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish Tuner signal board for the replacement.
Posted on Jul 06, 2010
SOURCE: I have apex 32 hdtv
Hello, Try this link, this is what's called a power scan. If this doesn't work then there is a compatibility issue. http://www.dishnetwork.com/SupportSection/power-scan-instructions
DISH Network Customer Service
Posted on Jan 16, 2011
Tips for a great answer:
Dec 28, 2013 | GE RM24912 Universal Remote Control
Jul 02, 2011 | Apex Digital LD3249 LCD TV
Apr 22, 2011 | Apex Digital LD3249 LCD TV
Direct Code Entry
1. Press and hold the CODE SEARCH
button until the red indicator stays
on, then release the CODE SEARCH
2. Press and release the desired Mode
button (TV, VCR, etc.). The red
indicator blinks, then stays lit.
3. Enter the 4 digit code from the code
tables. Note: after a valid code entry,
the red indicator turns off. For an
invalid code, the red indicator
4. With your device on, press
CHANNEL UP. If the device
responds, no further programming is
required. Note: If some buttons do
not operate your device, try one of
the other codes for your brand.
Feb 15, 2011 | Apex Digital Televison & Video
Jan 18, 2011 | Apex Digital LD3249 LCD TV
Jan 08, 2011 | Apex Digital LD3249 LCD TV
Apr 07, 2010 | Apex Digital LD3249 LCD TV
Dec 05, 2009 | Apex Digital LD3249 LCD TV
Nov 23, 2009 | Apex Digital LD3249 LCD TV
Nov 22, 2009 | Apex Digital LD3249 LCD TV
667 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: