Question about Samsung WF337AA Front Load Washer
Take out the drawer and clean the compartment and pipe at the end of the drawer with hot soapy water - washing up liquid works well. Clean all around it. To show this is working OK, put it in the sink and fill up the compartment with water until it is overflowing then stop. The water should drain out of the compartment on its own.
Next, where the drawer fits in the machine clean the water exit above the drawer with a washing up brush. This can appear brown or white depending on your water type. If this is OK try running the machine. If there is still a problem, remove the drawer again and turn off the power at the mains. Use something like a paper clip to poke all the holes in the water dispenser area above the drawer. There are lots of them so some patience might be required. If you live in a hard water area it could be blocked with limescale in which case an application of a descaling mousse or spraty will assist. Once complete, make sure you rinse the drawer area, drawer and put the drawer back in and run the machine on a short cold fill wash cycle. Put some fab con in the drawer to test that the machine drains it correctly. If all is well then there will be no fab con left. If it is still there then you will need to get into the water dispensing area to see what is wrong. Occasionally the mechanism can get jammed, lose a spring or just get broken, in which case it will need replacing.
Posted on Oct 05, 2009
Testimonial: "Thanks, I will give it a try. "
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Aug 01, 2014 | Washing Machines
Here is a tip that I wrote about what I found out about the fabric softener not dispensing into the washer...
Fridgidaire Washing Machine Fabric Softner not going into washer
Feb 21, 2011 | Frigidaire GLTF1240A Front Load Washer
Dec 19, 2010 | Washing Machines
Dec 03, 2009 | Kenmore Washing Machines
Jan 17, 2009 | Maytag MAH6500 Neptune Front Loading...
Jan 07, 2009 | Kenmore Elite 45986 Front Load Washer
Jul 29, 2008 | Maytag Washing Machines
Aug 14, 2007 | LG WM2688HWM TROMM SteamWasher
200 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: