Question about Hammering

1 Answer

Road Breaker GHS 27 is not working to full power, very slow! any help would be welcome,thanks Nigel

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 251 Answers

If the motor is running slow then check the plug as it maybe wired with one of the supply wires going into the earth pin of the plug ( giving the machine only 55v )
also if you can get someone to test that your getting a correct supply to it ( 110v)
failing that a change of brushes often helps .

Posted on Oct 23, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why would our Model 702-27, be kicking the breaker. Tried changing plugs, but as soon as the breaker is reset and then the machine is turned on it kicks. The machine is full of product, and was runn

What breaker? The GFI on the wall plug?
If so,liquid may have entered the device and tripped the gfi breaker at the wall plug OR the main panel that provides power to that wall plug.

Nov 10, 2014 | Taylor 702-27 Tabletop Soft Ice Cream...

1 Answer

Hi, I am having an issue with my Electrolux dishwasher which is causing a fuse to trip on my consumer unit. Is this likely to be the heating element or could it be something else? Many thanks.

Hello Nigel, thank you for your question. Often when a unit has been installed for a while and recently it starts to trip the breaker, it is typically due to a possible shorting on the unit or an issue with the breaker. Since the dishwasher will not complete the cycle, an actual diagnosis from an experienced tech would determine the precise cause to reduce the risk of unnecessary parts.

Aug 13, 2013 | Electrolux Dishwashers

1 Answer

Not getting fire

check your fuses as well as connections to your coil check your on off switch for power. use a test light for these tests it has to be electrical source related

Sep 04, 2012 | Kymco People S 200 Motorcycles

1 Answer

The breaker is trips when the system is turned on. We tried another circuit and it also popped the breaker. It is a 2 horse lake lawn sprinkler unit. It has been working beautifully for its second season...

Good Question.

The Lawn Sprinkler does not use that much power.

So you had your Lawn Sprinkler in storage, and you got it out for this season ?

If yes I can only think if any damp has got in, on the connection, that Run to your main power supply. Check it out.

Good Luck


Jul 28, 2011 | Computers & Internet

2 Answers

Keyboard mouse installation

You can download the drivers for the keyboard and mouse from
Also the manual can be found at the same site.
Please rate this solution. Thanks.

May 19, 2010 | Gear Head WIRELESS keyboard/Mouse

4 Answers

I have a PHILIPS SRU3004/27 Universal 4in1 remot


Mar 14, 2010 | Televison & Video

1 Answer

Slow oscillation, clicking in control panel, dimming lights

Hum. 1st I would check make sure power company is sending you the right Voltage.

2nd Make sure did not trip one side of breaker, Reset if needed.

3rd Pulling electrical circuits down could mean Start & or run capacitor is failing or failed. Or worse motor is failing.

Unless you know how to troubleshoot electrical systems might leave to tech Capacitors store voltage/amps & can harm or kill you.

I f I can help more MSG me back. Hope this helped. Please rate. Thank you. Good Luck!

Mar 12, 2009 | Washing Machines

Not finding what you are looking for?
Hammering Logo

Related Topics:

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hammering Experts

John Trevino

Level 3 Expert

1388 Answers


Level 3 Expert

3289 Answers

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

1884 Answers

Are you a Hammering Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides