Question about RCA L32HD31 32 in. LCD HDTV

1 Answer

Power Light is On, TV is blank.

TV blanks out as if power button was pressed, but the power light stays on. After a few moments the TV either brings back the picture as if its turning on, or the light goes off with the power.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 152 Answers

Reallyme07, sounds like a "thermally intermittant solder joint" on one of the circuit boards (switch-mode-power-supply / inverter-supply) that are a key component used to light up the "cold-cathode-fluorescent-tubes" that supply "WHITE LIGHT" to illuminate the LCD panel. you didn't state what you would like to do or how to get it repaired?? Do you have warranty on set? how old is it? The same technology is used in small screen LCD computer monitors. you may want to visit YOUTUBE and search for and view the longer video clips of LCD monitor disassembly and repair videos FYI. The same kind of problems exist for them as do your lcdhdtv. In any case, a tech type person will need to fix it by an IN-HOME VISIT or CARRY-IN to the shop. I'm louie12fix on fixya or lmistyrel@aol.com Please rate this response if possible. Bye for now.

Posted on Oct 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Epson Stylus CX6600 wont power up/scan light turns on then goes off.


this may help...
Check that all the access doors and compartments are closed correctly.
Check paper isn't jammed.
Take out the all the ink cartilages and reset them in correctly
Make sure the rollers are set in place correctly, (if there removable)
Hope this helps a bit

Feb 09, 2014 | Epson Stylus CX6600 All-In-One InkJet...

1 Answer

Blue light turns on but tv screen stays blank


The blue light indicates power is getting to your TV but there may have been failure of the internal power supply

Jul 07, 2013 | Sceptre Televison & Video

1 Answer

When turning on tv. screen will display Bravia image & then go blank. red light flashes SIX times


Power off the television. Wait a few minutes, then power it back on. If this does not correct the issue leave the power on, point your remote control towards the Sony television and hold the down arrow button. While holding the down arrow button press the "Power" button. Release the down arrow button and the Sony TVicon1.png will reset itself to factory settings. Once the television performs a scan on itself your problem should be gone.
Good Luck Ed Pinero

Read more: How to Troubleshoot the Standby Indicator Flashing on a Sony TV ' eHow.com http://www.ehow.com/how_5925008_troubleshoot-indicator-flashing-sony-tv.html#ixzz2KBk1cWbu

Feb 02, 2013 | Sony BRAVIA KDL-40V2500 40 in. LCD HDTV

1 Answer

We were playing a game and the tv screen went black then we ejected the game and the wii console will not shut off and now it wont play a game or nothind then we tried to unhook it and the light stayed...


Power light is green or orange - TV screen is blank
    If the power light is green or orange and your screen remains blank, follow these steps.
    1. Completely power down your system by pressing the power button for 10 seconds. If that doesn't work, unplug the AC Adapter from the Wii for a moment, then plug it back in.
    2. Make sure your Wii console has the most current Wii system menu. Download the latest update (how to), and then test your Wii console to determine if the problem has been resolved.
    If you continue to experience this issue, there is a problem with the Wii console and it will need to be repaired.

Jan 27, 2011 | Nintendo Wii Console

1 Answer

I unplugged my wii to move it to another tv and it after i plugged it back in the tv was black the volume worked and the controllers rumbled al the power was on and working,


Power light is green or orange - TV screen is blank
    If the power light is green or orange and your screen remains blank, follow these steps.
    1. Completely power down your system by pressing the power button for 10 seconds. If that doesn't work, unplug the AC Adapter from the Wii for a moment, then plug it back in.
    2. Make sure your Wii console has the most current Wii system menu. Download the latest update (how to), and then test your Wii console to determine if the problem has been resolved.
    If you continue to experience this issue, there is a problem with the Wii console and it will need to be repaired.

Jan 26, 2011 | Video Game Consoles & Games

1 Answer

I recently fixed the blinking green light problem following advice here. Now, about a week later, when I turn on the tv, I get image for a few seconds and then the screen goes blank/dark. Green light...


i have the same problem. i just replace the power board because of the "green blinking" light. now, light stays green, picture comes on for a few seconds, then blank....

did you fix your problem.

Aug 31, 2010 | Sharp Aquos LC-37G4U 37 in. HD-Ready LCD...

1 Answer

Multisync LCD 1700V turns on then screen goes blank and shuts off


Does the power light stay on? If so, you have an inverter problem. If the power light goes off, you have a power supply problem.

Sep 02, 2009 | NEC MultiSync LCD1700V 17" Flat Panel LCD...

1 Answer

Sony KDF-46E2000 - Screen Goes Blank


The lamp can cause the picture to cycle without spitting out a lamp error. I'd replace the lamp and clean out the dust/dirt from fans, etc to hopefully resolve your issues.

Dec 06, 2008 | Televison & Video

1 Answer

Sony KDF-46E2000 - Screen Goes Blank


You definitely have a bad lamp. Sony rates the lamp life at between 4000 and 8000 hours. There are 3 things that effect the lamp life, listed in order of importance:
1) number of times the lamp is turned on and off. Every time the lamp is first fired, it takes life off the lamp. Customers I see that turn the TV on in the morning, leave it on all day and then turn it off on the evening can get up to 12000 lamp hours
2) ventilation. Be sure you have at least 6 inches of open space all the way around the set and that the vents are clear of dust and debris.
3) power. If the power is interrupted when the set is on, there cannot be a proper cool down cycle. The fans will run after you turn the set off to properly cool it down, if the power is lost this cannot happen. If your power is unreliable, buy a small UPS to let the set finish a cool down cycle

Occasionally a lamp will faill before the average lamp time due to being defective. from your purchase date it sounds like you got about average lamp time. Be sure to purchase AN ORIGINAL SONY LAMP as a replacement, becuase the aftermarket lamps are bad news, Be sure to rate this solution. Thanks!

Oct 13, 2008 | Sony KDF46E2000 46" Projection HDTV

Not finding what you are looking for?
RCA L32HD31 32 in. LCD HDTV Logo

319 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73691 Answers

matt martin
matt martin

Level 3 Expert

1208 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...