Question about Frigidaire FEF336BC Electric Kitchen Range

1 Answer

Binking light on one control of electric blanket (Sunbeam)

I unplugged it and then plugged back in. The blinking stopped for a few minutes started it again.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I'm not sure how I was registered as having a problem with an electric range; my problem was with my Sunbeam electric mattress pad.

I used one of the suggestions I read here. I unplugged the connection to the mattress pad and blew into the receptacle to clear any dust or lint from it. I reconnected everything, plugged it in, and the problem has been eliminated.

Thanks for the suggestion.

Posted on Oct 06, 2009

  • William Spencer
    William Spencer Nov 11, 2015

    I think this problem is due to not plugging in the controller into the mattress pad forcefully enough. I had this problem after washing the mattress pad. On the first try, I had the one controller blinking but not the other. I unplugged everything. Then REALLY pushed the connector to the pad, pushing left, then right very forcefully. When I plugged the cord into the wall socket, voila, no lights came on at all, and it is working now.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What does the light flashing on a sunbeam electric blamket controller mean and why wont the blanket heat up


The flashing red light is designed to notify you in the event that
a problem has been discovered by flashing the light on the base unit.

Before resetting the unit. First, check the blanket/mattress
pad for visual damage.
If no visual damage is found, unplug the system from wall outlet.
Check that the base unit is well connected to the module. Plug the power cord into the wall outlet. Set the base unit to "On." If the system still does not operate after two or three times trying to reset, disconnect the power cord and get it checked out by a specialist!

Nov 02, 2014 | Home

1 Answer

Se My blanket is blinking F2 and I can't set the controls


To reset the control:
1) Unplug the blanket from the wall outlet.
2) Check that the control is well connected to the module. (Disconnect and re-connect it).
3) Plug the power cord into the wall outlet.
4) Set the control to "on".
Try 1-4 three times. If the blanket still does not operate, disconnect the power cord and contact Sunbeam Customer Care at 1-(800) 892-7684.

Oct 07, 2014 | Sunbeam Electric Blanket - queen

1 Answer

Cant find the flag tag to reset my electric blanket control


To reset the control:
1) Unplug the blanket from the wall outlet.
2) Check that the control is well connected to the module. (Disconnect and re-connect it).
3) Plug the power cord into the wall outlet.
4) Set the control to "on".
Try 1-4 three times. If the blanket still does not operate, disconnect the power cord and contact Sunbeam Customer Care at 1-(800) 892-7684.

Oct 05, 2014 | Sunbeam Electric Blanket - queen

1 Answer

Dual control electric blanket doesn't get warm, the controllers just blink


The problem can be caused by a defective heating element in the blanket.

Nov 24, 2013 | Sunbeam Electric Blanket Dual Controller...

1 Answer

I have a Frigidaire FMV156DBA built-in over-the-counter microwave that started behaving erratically tonight. The light started blinking on and off, accompanied by a repeated beeping. I unplugged the unit...


Yes have it serviced. Sounds like there is a loose/corroded connection inside and loose connections can cause fires. The intermittent/ramdom operation is indicative of this.

Apr 08, 2011 | Frigidaire Over-the-Range Microwave

1 Answer

Hello: I just received a Sunbeam electric heating blanket (style S85A), and tried to use it last night, however when i plugged in the blanket the on/off light and "L" light were blinking and...


it maybe defective, with it being so new, if it is still doing it I would return and start again. Otherwise contact manufacturer and ask them at customer service.

Sep 25, 2017 | Health & Beauty

Not finding what you are looking for?
Frigidaire FEF336BC Electric Kitchen Range Logo

737 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Ismael Rodriguez...

Level 2 Expert

166 Answers

Mike Carew

Level 3 Expert

969 Answers

Are you a Frigidaire Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...