Question about Printers & Copiers

1 Answer

HP AIO color laser printer stuck on "device busy" HELP

"device busy"

Posted by on

1 Answer

Re: HP AIO color laser printer stuck on "device busy" HELP - Printers & Copiers

I have same problem

Posted on Jun 24, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Cm1312 keeps on initializing

If under warranty call HP. The formattor board has failed, this can be a jet direct connection issue, but the jet direct board is internal.If there is a slot in back to add an external jet direct board, try that first.

Nov 15, 2014 | HEWLETT PACKARD - LASER JETS hp color...

1 Answer

HP LaserJet 400 colorMFP M475dw + Scan to Email + Device is busy, Try again later

If I'm getting this right, your printer says "Device is busy, Try again later" when you try to Scan to Email ? Make sure your Scan to email-configuration is set up correct. Still no luck ? Leave the printer without power for 30 min. You can also try a factory reset. If nothing help, check if your printer is still under warranty HERE. If still warranty call your local HP support and ask for service.

Nov 04, 2013 | HP LaserJet Pro 400 color MFP M475dw -...

1 Answer

How can i repair my hp laser jet 2600n printer when paper jam

Hi. I would suggest cleaning your printer on the inside and removing any blockage from rollers or look for any peace of paper that's clogging any device inside your printer. Also try pressing all the sensors inside to check if they are not stuck or something. Hope this helps

Jun 04, 2010 | HP Color LaserJet 2600n Printer

1 Answer


You can download the drivers for any of your HP products from HP's support site (

For your HP J4580 AIO officejet printer you can download the driver from the following link by selecting your Operating system.

Driver for HP J4580 AIO officejet

Thank you for choosing Fixya

May 27, 2010 | HP OfficeJet J4580 All-In-One Laser...

1 Answer

OFFICEJET 5610 COLOR AIO Printer: I have an hp 1530 that wont print in color after w...

Open HP solution center.

click on settings >>> Printer settings >>> click on Color tab..

select print in color. Click on OK.

Now try to print

May 07, 2010 | HP Officejet 5610 Color All-in-One Printer

2 Answers

Dell Photo AIO Printer 924 - Printer Busy

Might need a new printer. Lexmark printers can be troublesome.

Jul 14, 2009 | Dell 924 All-in-One InkJet Printer

1 Answer

HP 1600 color laser printer--colors are out of sync

Check the following information please.

General print quality issues

Solving issues with color documents This section describes issues that can occur when you print in color. Color document issues Problem Cause Solution Only black is printing when the document should be printing in color.

c00659983.gif Color mode is not selected in your program or printer driver. Select color mode instead of grayscale mode. The correct printer driver might not be selected in the program. Select the correct printer driver. The device might not be correctly configured. Print a Configuration page.

One or more colors are not printing, or are inaccurate.

c00659984.gif Sealing tape might be on the print cartridges. Verify that the sealing tape has been completely removed from the print cartridges. The media might not meet HP specifications. Use a different paper, such as high-quality paper that is intended for color laser printers. The device might be operating in excessively humid conditions. Verify that the device environment is within humidity specifications. One or more print cartridges might be low. If you are using non-HP print cartridges, no messages appear on the device control panel or in the HP Toolbox. Replace any low print cartridges. The control panel is set for override. Replace low or empty print cartridges. A color is printing inconsistently after you load a new print cartridge.

c00659985.gif Another print cartridge might be low. If you are using a non-HP print cartridge, it might be low or empty but you will receive no indication. Remove the print cartridge for the color that is printing inconsistently and reinstall it. The control panel is set for override. Replace low or empty print cartridges. The colors on the printed page do not match the colors as they appear on the screen.

c00659986.gif The colors on your computer monitor might differ from the device output. Select Screen Match in the Color tab of the printer driver. If extremely light colors or extremely dark colors on screen are not printing, your software program might interpret extremely light colors as white or extremely dark colors as black. If possible, avoid using extremely light or extremely dark colors. The media might not meet HP specifications. Use a different paper, such as high-quality paper that is intended for color laser printers. The finish on the printed color page is inconsistent.

c00659987.gif The media might be too rough. Use a smooth paper or print media, such as a high-quality paper that is made for color laser printers. Generally, smoother media produces better results. Repetitive image defect ruler Use a repetitive image defect ruler to measure occurrences of repetitive image defects to help solve image quality problems. Place the ruler next to the first occurrence of the defect on the page. Find the distance between identical defects and see the Repetitive image defects table to identify the component that is causing the defect. Repetitive image defects Measurement Component 24.7 mm0.97 inch Developer sleeve 26.7 mm1.05 inches Charge roller 32.9 mm1.3 inches RS roller 37.7 mm1.48 inches Transfer roller 54.5 mm2.15 inches ETB rollers 56.6 mm2.22 inches Fuser sleeve 62.8 mm2.47 inches Pressure roller 75.4 mm2.97 inches OPC
Have a good evening

Jun 18, 2009 | HP LaserJet 1600 Printer

1 Answer

Business cards get stuck in HP 4650

The card stock is most likely too heavy for the 4600. If you check the owners manual, you will most likely find this is "Out of media specifications".

Other color HP laser printers like the 2500 cannot move card stock well either.

HP will tell you that 'if the printer moves paper perfectly' it's not broken.

Mar 12, 2009 | HP LaserJet 4650 Color Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts


Level 3 Expert

94113 Answers

old marine
old marine

Level 3 Expert

1313 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides