Question about Royal VF1000MX Shredder

1 Answer

Paper shredder vf1000

Replacement parts maindrive gear

Posted by on

  • 1 more comment 
  • misterray1 Mar 24, 2008

    I just sent this Email to Royal:

    Dear Royal representative,

    We have a Royal Cross-cut Shredder which I have repaired on four occasions and now is the time to give up as it is now not reparable. The problem began when the retaining screws which hold the cutter in place to sync with the gears became stripped and thereby causing the cutters to twist and jam. Prior to going out to purchase a replacement unit, I would like to be assured that Royal's products are of a better durability than the Royal which we presently had purchased from Costco. There are two reasons why we are really disappointed that we did not receive a longer life of this unit, first the waste of money and secondly that our landfills sites are being indulged with products that are a result of our throw away world. We have always treated this shredder with utmost care and therefore should have served us for many more years as this is a home and much is being shredded.
    Model VF1000
    Lot#: 060234587

    Looking forward to receiving your comments.

  • firstangel Jun 18, 2008

    Hi,

    I have the model VF1000 lot#0606737673 and the gear is broken. Do you have the email address of the Royal Company I would like to order the a new piece.

    Please email me.
    Thanks
    Carole

  • darbo60 Mar 15, 2009

    Shredder is beginning to jam up. Found broken plastic pieces coming from the roller area. Sounds like it ready to stall out. Only had for less than a year and it does not get a whole lot of use in small home office enviroment. Not very pleased with the performance, looks like i will need a new one.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

I feel for you too, I have the same problem, You have to order the gear at Royal.com

Posted on Jan 19, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the problem with my machine because its showing error code l4 even after i replaced the main motor


check connection of main motor , check maindrive , check resistance of developer unit / fuser unit / opc- unit

replace worn gears

Jun 18, 2014 | Sharp Office Equipment & Supplies

1 Answer

I have error C200. How do I fix it?


you have a broken gear in the maindrive motor gearbox

Feb 20, 2012 | Kyocera KM-1505 Copier

1 Answer

Gears seem to be skipping. which of the 2 gears is most likely to wear? the one on the armature? or the big disk one?


If one gear is damaged it is causing damaging to the other, whether you can see it or not. If you have teeth that are skipping, the gear with bad teeth will wear out the teeth on the other gear. You should always replace both gears. On your polisher, the small drive gear isn't on the armature, it's part of the armature (Makita part number 515266-4) and that's a $90 to $110 part to replace. The spiral bevel gear (Makita part number 227455-6) is $40 to $45. You can replace one or the other but the gear you leave in will only wear out the new one.

Jan 31, 2011 | Makita PW5001C 4'' Variable Speed Electric...

1 Answer

One of the heater gears ( shield ) is continuously broken several times


take out the gear which drives the broken gear then replace the broken with a new gear, check manyally driving the gear,which part or gear causing resistance in the smooth operation, replace the faulty part/gear.lubricate moving parts.

Jan 12, 2011 | Canon NP 6050 Copier

1 Answer

Nylon drive gear worn on one side


I have been told by the manufactutere that they do not make any replacement parts for their shredders. If it is less than a year old they will replace it.

Jun 20, 2010 | Aurora Electronics AS1018CD Shredder

1 Answer

Where can i download software for my ngs webcam


Download from the NGS site

http://www.ngstechnology.com/maindrivers.asp
Click the top dropbox and select 'webcams'

Click the lower dropbox to select your webcam

Apr 22, 2010 | NGS Technology ShowCam Plus Webcam

2 Answers

Harley g/box bearing failure


as with any mass produced product it is almost inevitable that you will get som duds however the most important thing to remember withany bearing instalation isa to kep them perfectly square to the mating surfaces wich from you description of ther instalation you have done heating the cases & dropping the bearings in is the prefered method all said & done it would appear that you have unfortunately got a dud from past experience with harley they wont warranty their parts unless they were installed by a dealership your cheapest replacement alternative is to remove the offending bearing take it to a bearing supply company & have them match it up for regards geoff

Mar 14, 2010 | 2006 Harley Davidson FLHRI Road King

1 Answer

I have a 1984 honda vf1000 motorcycle and 2nd gear is going do I have to replace all the gears or just 2nd gear


Replace gears in sets, the bad gear and the gear it meshes with. In what way is 2nd gear going bad? The gear may be fine and the shift fork is the problem.

Google " vintage honda motorcycle parts " and google " honda motorcycle salvage " for parts.

May 05, 2009 | 1984 Honda VF 1000 R

3 Answers

Xerox 432dc print engine error??


Check:
Hard disc Drive
Fuser
Laser

Nov 15, 2007 | Xerox 5665 Copier

Not finding what you are looking for?
Royal VF1000MX Shredder Logo

1,006 people viewed this question

Ask a Question

Usually answered in minutes!

Top Royal Office Equipment & Supplies Experts

James Cagle
James Cagle

Level 2 Expert

478 Answers

Marvin
Marvin

Level 3 Expert

82208 Answers

Adorjani Laszlo

Level 3 Expert

1297 Answers

Are you a Royal Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...