Question about Fargo Persona C10 Thermal Printer
The take in roller stopped moving. I want to fix the source of the problem. The printer is a Fargo Persona C10 Thermal printer.
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Solution to loud noises:
Check the ribbon cartridge and ensure that the cleaning roller is properly installed and rolls smoothly
inside the cartridge. Then check the plate underneath the cleaning roller and verify the 4 pins are seated properly.
Solutions to blurry prints:
1. Make sure the printer has the latest firmware via the web. >> Click Here << to download the latest firmware (Look for "Persona C30e Firmware_Windows/Linux 184.108.40.206 "). The firmware upgrade file is packed in zip file. Extract it to a directory of your choice.
>> Click Here << for an instruction on how to upgrade the firmware. When being prompted to locate the "upgrade file", browse to where you extracted the firmware upgrade file.
2. Calibrate the ribbon sensor. If you have completed these 2 steps and the printer still prints out faded or light cards,
3. Try a new power supply. Part# (E000480). Note: Please verify the proper power supply is being used.
Thank you for using FixYa!
Dec 19, 2011 | Fargo Persona C30 Thermal Card Printer
Aug 25, 2010 | Fargo Persona C30 Thermal Card Printer
May 16, 2010 | Fargo Persona C30 Thermal Card Printer
May 14, 2010 | Fargo Persona C25 Thermal Printer
Jan 07, 2010 | Fargo Persona C25 Thermal Printer
Aug 03, 2009 | Fargo Persona C30 Thermal Card Printer
Mar 10, 2008 | Fargo Persona C11 Thermal Printer
128 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: