Question about RIM BlackBerry 7730

1 Answer

How to open ethernet?? - RIM BlackBerry 7730

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 541 Answers

Task 1 - Turn on the Discoverable option on the BlackBerry smartphone Complete the following steps:

  1. On the Home screen of the BlackBerry smartphone, click Options > Bluetooth.
  2. Display the menu and click Options.
  3. Set the Discoverable field to Yes.
  4. Display the menu and click Save.
Task 2 - Pair the BlackBerry smartphone and the computer On the computer, complete the following steps:
  1. Go to Control Panel > Bluetooth Devices.
  2. Click Add.
  3. Select the My device is set up and ready to be found check box, and click Next.
  4. When the BlackBerry smartphone is detected, select the check box next to the BlackBerry smartphone, and click Next.
  5. Select the Let me choose my own passkey option.
  6. Type a passkey in the field provided, and click Next.
  7. On the BlackBerry smartphone, type the same passkey from Step 6, then click the trackball.
  8. On the computer, when the Completing the Add Bluetooth Device Wizard screen appears, click Finish.
  9. On the BlackBerry smartphone, when prompted to accept an incoming Bluetooth connection, select Don't Ask Again, and click Yes.
Task 3 - Set up the Internet access point name (APN) Note: You only need to perform this task the first time that you set up the Internet APN.
On the computer, complete the following steps:
Note: If you are running Windows Vista, select Classic View.
  1. Go to Control Panel > Phone and Modem Options.
  2. Select the Modems tab.
  3. Select Standard Modem Over Bluetooth Link, and click Properties.
  4. Select the Advanced tab.
  5. In the Extra initialization commands field, type the following: AT+CGDCONT=1,"IP","<your Internet APN( for eg: aircelgprs)>"<cr>
Task 4 - Configure Dial-Up Networking Note: You only need to perform this task the first time that you configure Dial-Up Networking.
On the computer, complete the following steps:
  1. Go to Start > Settings > Network Connections.
  2. Right-click Bluetooth DUN connection, and select Properties.
  3. Select the Networking tab.
  4. Select Internet Protocol (TCP/IP).
  5. Click Properties.
  6. Click Advanced.
  7. Select the General tab, and clear the Use IP Header Compression check box.
  8. Click OK to close all open windows.
  9. Go to Start > Settings > Network Connections.
  10. Double-click New Connection Wizard.
  11. Click Next.
  12. Select Connect to the Internet, and click Next.
  13. Select Set up my connection manually, and click Next.
  14. Select Connect using a dial-up modem, click Next.
  15. Select Modem - Standard Modem Over Bluetooth link, and click Next.
  16. If the Select a Device screen appears, select the Modem - Standard Modem check box, and click Next.
  17. Clear the ISP Name field blank, if necessary, and click Next.
  18. Complete the appropriate step below:
    • If the BlackBerry smartphone operates on General Packet Radio Service (GPRS) or Enhanced Data Rates for Global Evolution (EDGE) networks, type *99# in the Phone number field, and click Next.
    • If the BlackBerry smartphone operates on Universal Mobile Telecommunications System (UMTS) networks, type *98# in the Phone number field, and click Next.
    • If the BlackBerry smartphone operates on Code Division Multiple Access (CDMA) or 1x/Evolution Data Optimized (EVDO) networks, type #777 in the Phone number field, and click Next.
  19. Type the user name and password provided by your wireless service provider. If your wireless service provider has confirmed that this information is not required, leave the fields blank. Click Next.
  20. Click Finish.
Task 5 - Connect the computer to the Internet using Dial-Up Networking Note: During this procedure, do not operate the BlackBerry® Browser or any third-party applications on the BlackBerry smartphone. An active data session may interfere with the modem connection. Also, make sure an ethernet connection is not active at the same time.
On the computer, complete the following steps:
  1. Click Start > Settings > Network Connections > <Name of the new connection>.
  2. Type the user name and password provided by your wireless service provider. If your wireless service provider does not require this information, leave the fields blank.
  3. Click Dial.

Posted on Oct 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Computer won't recognise ethernet connection from router


I don't know the make. model, of laptop or your OS? Open network connections, is it enabled? Is there a Network Icon in the Tray Notification Area? You really do not need a Disk to connect. Just plug in the ethernet and boot the machine.The computer should ID the connection, if it enabled and working properly. If not open Device Manager , Network Adapters and enable the ethernet adapter.For further assistance respond to post.

Dec 18, 2012 | Computers & Internet

2 Answers

How do i replace the ethernet port on a sony vaio rx860


Bye an ethernet card and plug it into an open PCI slot on your motherboard (if you have one).

Aug 24, 2011 | Sony VAIO Digital Studio PCV-RX860 PC...

1 Answer

I've reinstalled all programs but now don't have the Ethernet driver all the other drivers is already installed and now I'm stuck on Ethernet. Can you please help me solve this problem?


Please provide specific PC brand and model so we can help.
If you built the PC yourself, open it up and check to see what model the motherboard (if integrated ethernet) or Ethernet card is.

Dec 29, 2010 | Computers & Internet

1 Answer

Could not open youtube videos. Message shows .aui


AUI (attachment unit interface) is the 15-PIN
physical connector interface between a computer's network interface card (NIC)
and an Ethernet
cable. On 10BASE-5
("thicknet") Ethernet, a short cable is used to connect the AUI on the computer
with a transceiver on the main cable. In 10BASE-2
or "thinnet" Ethernet networks, the NIC connects directly to the Ethernet
coaxial cable at the back of the computer.
IEEE Hope that helps, Thanks, Sea Breeze
http://www.appliance911seabreeze.com
802.3,
the Ethernet standard, defines the AUI 15-pin physical layer interface. This
interface is also called a DB-15 interface or a DIX interface (DIX refers to the
three major companies who helped standardize Ethernet: Digital Equipment
Corporation, Intel, and Xerox

Oct 03, 2010 | YouTube Videos

4 Answers

Cannot connect laptop with the eithernet cord


If you cannot connect your laptop using an Ethernet cable, make sure the laptop's wireless ethernet is disabled. To disable it in window xp, click the Start button and open the Control Panel. Double-click Network Connections. Right-click Wireless Network Connection and select Disable from the drop-down list.

04e3ee0.png If you are using a laptop with Windows Vista, click the Start Button and type Network and Sharing into the Start Search box. Select Network and Sharing Center from the Programs list. Select Manage Network Connections from the left pane of the window. The Network Connections window will open. Click on Wireless Network Connection. Select Disable this Network Device at the top of the window.

9a7c8c6.png Troubleshoot the Network
After disabling the laptop's wireless connection, be sure to restart the computer before trying to connect with the Ethernet cable again. If you still cannot connect the laptop to the network with an Ethernet cable after rebooting, check to make sure there is not a problem with the network itself. If there are others nearby connected to the same network, such as in your office, dorm or another public location, ask them whether they are currently able to connect to the network. If no one else is using the network, contact the system administrator or your Internet service provider to see if there may be an outage. This step can save you plenty of time troubleshooting if there is an outage in your area!
Troubleshoot the Ethernet Cable
If there is no problem with the network itself, the reason that you cannot connect the laptop may be the ethernet cable. Make sure that the Ethernet Cable is securely connected to both the laptop and the wall outlet. If possible, try connecting the Ethernet cable into another wall jack or port on the router, and then try using a different Ethernet cable. The Ethernet cable you are using may be damaged.


8686681.png Troubleshoot Network Settings
If the Ethernet cable does not seem to be the reason why you cannot connect to the network, check the laptop's network settings. In Windows XP, open the Control Panel and select Network Connections. Open Local Area Connection and check the status of the connection.
In Windows Vista, go to the Network and Sharing Center and select Diagnose and Repair from the left pane and wait for the results.


If the Local Area Connection is listed as Disabled, right-click it and choose Enable.
If it says that the network adapter is unplugged and you have ruled out a problem with the Ethernet cable and port, the laptop's network adapter may have failed. Try using the same Ethernet cable on another computer. If you are able to connect to the network on another computer using the same Ethernet cord, contact the laptop's manufacturer, a computer repair technician or replace the network adapter yourself.
fc4831a.png If the Local Area Connection is listed as Disabled, right-click it and choose Enable.
If it says that the network adapter is unplugged and you have ruled out a problem with the Ethernet cable and port, the laptop's network adapter may have failed. Try using the same Ethernet cable on another computer. If you are able to connect to the network on another computer using the same Ethernet cord, contact the laptop's manufacturer, a computer repair technician or replace the network adapter yourself.

Oct 28, 2009 | HP Pavilion dv6000z Notebook

1 Answer

Can the modem's ethernet port connect to a video game console?


Most modems that have both usb & ethernet connectors are either/or, not both. I recommend using
the ethernet connection to your computer than the usb - the ethernet connection is faster & more
reliable. It also frees up your usb port for other use. If you want both your computer & game console on
the internet, then you need to buy a router which will allow you to share the modem.

Jul 08, 2009 | Computers & Internet

1 Answer

LOST ETHERNET DRIVER


If you have the "Windows XP" operating system then follow these instructions...If you have a second computer with an internet connection then you can search on the internet for that driver...type the make and model of your computer plus the word "ethernet driver" and after you find it you just download it into "My Documents"...after that, copy the driver onto a blank CD disc...Take the CD and put it into your notebook and it should open and extract the file ..If it doesn't open up when you load the CD, go into "My Computer" and then double click on the "CD/CDRW/DVD/DVD-RW drive...restart your computer and remove the CD from the disc drive...Now plug your DSL into your ethernet port and see if it works...if it still does not work then go into "Control Panel" and then "Network and Internet Connections" and then "Network Connections" and then "Create a New Connection" and then follow the instructions...restart your computer and see if it finds the ethernet port and receives the signal through the ethernet cord

Apr 18, 2009 | Computers & Internet

1 Answer

Need to install an ethernet card


ive circled the 2 points where you need to push in, the case will open towards you

b2590ad.jpg

Apr 09, 2009 | Dell Dimension 4300S (Refurbished)...

1 Answer

Gigafast ethernet won't let my Xbox connect to live


You might open this ports to the Gigafast Ethernet router :

TCP 80, 3074 and 53

UDP 88, 3074 and 53

Note: You'll needing to open these ports to the virtual server or port forwarding under advance settings of the router.

Mar 06, 2009 | GigaFast Ethernet Gigafast 10/100, 8-Port,...

1 Answer

Config DVMRe to PC


  1. Main Menu
  2. Communications
  3. Ethernet Settings
  4. Enable
  5. On your pc click start, run type in CMD, click OK
  6. at the prompt type in ipconfig, hit enter
  7. write down the ip address, subnet, etc.
  8. On pc open network connections
  9. create new connection

Jun 05, 2008 | Computers & Internet

Not finding what you are looking for?
RIM BlackBerry 7730 Logo

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top RIM Computers & Internet Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Andrew Wright

Level 2 Expert

117 Answers

David

Level 2 Expert

143 Answers

Are you a RIM Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...