Question about Bushnell 11-9000 Digital Camera

2 Answers

Camera flashes two times, but will not record a picture

Posted by on

  • Just Gort
    Just Gort May 11, 2010

    Not record anything? Are the pcitures really dark or black? or just all white or just can't find pictures? .

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 115 Answers

This sounds like a problem with the sd card either being corrupt and needing formating or being to large. if made in 07 or older it takes 512 mb sd card max if in 08 or newer it will take up to a one gig sd card.

Posted on Oct 06, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

New camera made in 09. Flashes but does not record picture or number on led screen. Checked card and batteries. All seems to be ok. No picture ... no number. Worked ok for about a week then stopped recording .

Posted on Jan 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i shut off recoreding


The same button you pressed to start the recording, must be pressed to stop the recording.
If the camera acts strange, you first have to look if the memory access light is burning or flashing. As long as this light is on or flashing you are not allowed to remove the battery. Only try switching off the camera, When the memory access light stopped burning or flashing, you eventually can remove the battery, to stop the camera acting in a strange way.
When you have had a problem with the camera, switch it off, and then remove the battery for a short time. Then reinsert the battery.
If your camera is switched on, you can change the shooting mode, by tapping the back panel (screen) and go to the logo's you see, to change it from recording video to taking pictures.
All details about your camera you can find in the manual. All Nikon manuals are online with Nikon USA.

Dec 28, 2013 | Nikon Coolpix S4000 Digital Camera

2 Answers

All of mywildgame cameras wont take night time pictures. No Flash.


You need to look for the camera with some good pixel quality with night recording. There are number of spy gadgets that comes with night time recording.
I would suggest you to visit the following url to know more http://www.spy3k.fr/Kit_mini_camera_sans_fil_avec_enregistreur.html

Aug 10, 2013 | Wildgame Innovations Home Security

1 Answer

How do i turn the flash off


Welcome to FixYa.

The FORCED OFF mode is the setting where flash is not activated in any recording condition. this mode used when taking pictures in places where the use of the flash is not permitted.

There are other 5 different mode/setting in using photo flash.

1. AUTO - flash automatically activated according to the recording condition.

2. AUTO/Red-eye reduction - flash is automatically activated according to the recording condition. It reduces the red-eye phenomenon by triggering the flash before actually recording the picture. After that, the flash is activated for actual recording again.

3. FORCED ON - use the when your subject is back-lit or under fluorescent light.

4. FORCED ON/Red-eye reduction - use this when you set the camera to PARTY MODE

5. Slow sync./Red-eye reduction - use this when you take pictures of people in front of a dark background.

I hope this solution will help you. Just send us you comments or suggestion if this solution was helpful.

Thank you for using FixYa.

Apr 08, 2011 | Panasonic Lumix DMC-FX8 Digital Camera

1 Answer

On record picture smeared like massively over exposed


Make sure the ISO is set on the correct exposure for daylight.. try say 100 or 200 if its set for flash at say 60 nor 30 and you try to use it in brighter or daylight it will overexpose.

Jul 28, 2009 | Canon PowerShot A40 Digital Camera

1 Answer

Sony Cybershot w55 flash speed and recording folder


One flash is for the camera the set the exposure the second is to miminize red-eye the third is the actual flash. All digital cameras do it, you can only turn off the red-eye flash.

Jul 10, 2008 | Sony Cyber-shot DSC-W55 Digital Camera

1 Answer

Flash


Your camera is set at twilnight mode which has the flash suppressed and you won't be able to turn it on because of the fixed setting of twilnight mode to get the proper result of the picture. Due to the mode setting requirement, a shakey hand icon and no flash icon will show. If you press the flash mode button, it beeps. The twilnight setting has a low shutter speed, i.e. the shutter opens longer to allow more lights in, therefore it shows recording to let you know that the shutter is still open, and any moment of the camera will result in a blurred picture.
Now, check your camera mode dial and turn it back to the 'green' camera and see if you can get the flash to fire.

Jul 08, 2008 | Sony Cyber-shot DSC-W50 Digital Camera

1 Answer

Not taking pictures


The sensor sounds bad. The communication seems to have a too long of a delay. Meaning it is not snapping the shot as soon as the sensor goes off.

Jun 10, 2008 | Bushnell Trail Scout 11-9500c Digital...

1 Answer

Blurry pictures


Most probably you have incorrectly set your camera to a Camera Record mode other than Auto.

If there is not enough light and you are trying to photograph the scene without flash, (eg. by setting your camera mode to a mode that is programmed not to use flash) then the camera has to compensate for the missing light by keeping its shutter open for a longer period of time so as enough light comes into its sensor.

If your hand shakes during that time, you get blurry images.

Check your camera settings. The Twilight scene mode gives you slower shutter speeds to capture dark, night scenes, but you need to stabilize the camera on a tripod or something, depending on the level of light of the scene you want to photograph. The Twilight Portrait, on the other hand, is the same as Twilight with the addition of flash is used to illuminate a person or foreground subject as well as capturing a night background. This mode also keeps a long shutter time for capturing the night background.

For taking pictures of people, I would suggest you use Auto or Portrait mode where the camera will automatically use fast shutter speeds and flash (if dark).

Hope this helps.

May 22, 2008 | Sony Cyber-Shot DSC-P92 Digital Camera

1 Answer

Slow record time/goes into standby mode


Hi,

It sounds as if it is working mechanically, but there is a software fault.

Try downloading a new driver for it (or use the CD which you may still have)

They are available free Here.

(Please contact again if this does not solve the issue; If it does, Please rata as Fixya! so others may benefit. Thanks.)

Feb 16, 2008 | Nikon Coolpix 5600 Digital Camera

1 Answer

Setting the camera timer


Hi there,
by the way in setting the timer for your camera here is what you are going to do...

-turn the camera on
-set the camera in recording
-press the Right Button beside the menu button (the incomplete circle)
-and then you will see that there will an icon showing in the left side part of the screen of the camera.

Selecting the self-timer
1. Rotate the MODE DIAL to select a RECORDING mode with the exception of VOICE RECORDING mode.
2. Press the SELF-TIMER button until the desired mode indicator displays on the LCD monitor.
A 10 second, 2 second or double self-timer icon appears on the LCD monitor. In Movie Clip mode, only the 10-second self-timer will work.
•2SEC self-timer (icon of incomplete circle with 2S)
: Pressing the shutter button will allow an interval of 2 seconds before the image is
taken.
•10SEC self-timer (incomplete circle)
: Pressing the shutter button will allow an interval of 10 seconds before the image is taken.
•Double self-timer (double incomplete circle)
: A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken. When using the flash, the 2-second self-timer may be delayed for longer than 2 seconds depending on the flash charge time.
3. When you press the SHUTTER button, the picture will be taken after the
specified time has elapsed.

Nov 26, 2007 | Samsung Digimax S730 Digital Camera

Not finding what you are looking for?
Bushnell 11-9000 Digital Camera Logo

Related Topics:

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bushnell Cameras Experts

kakima

Level 3 Expert

102366 Answers

Johnny Massengill
Johnny Massengill

Level 2 Expert

345 Answers

Brad Brown

Level 3 Expert

16010 Answers

Are you a Bushnell Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...