Question about Dell Latitude E6500 Laptop

2 Answers

No picture when i connect to tv via hdmi

I have connected my advent roma to my hdtv via hdmi and now all i get is a grey fuzzy screen. I have had picture before but not anymore.

Posted by on

  • 1 more comment 
  • gorehound Oct 05, 2009

    Hi steve,
    it's an advent roma laptop connecting to an LG 50". Thanks for your help.

  • gorehound Oct 05, 2009

    It says screen resolution on tv is 1360x768 at the moment. Trouble i always have problems with my tv, quite difficult to use system on it.

  • gorehound Oct 05, 2009

    It says screen resolution on tv is 1360x768 at the moment. Trouble i always have problems with my tv, quite difficult to use system on it.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 3 Answers

If you can give me some more detail, I might be able to help. Are you trying to connect your computer to your TV? If that is the case, most graphic cards can be set for dual output, but in most cases this has to be enabled through the software that came with your graphics card or by going to the properties screen on your computer monitor. There are several ways to do it. Hope this helps

Posted on Oct 05, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 416 Answers

You have to make sure the frequency and resolution are set correctly...ex 60, 70hz, and xxxx X xxxx. If these doesn't match the specs of the tv no picture is displayed. swtich your display options the show both screens and begin changing them to find one that works.....you prolly changed the resolution on your desktop between the last time you had it working and now. and although your Dell and TV should both have an auto adjust feature, they dont always work.
Good Luck and pls rate this post as fixya

Posted on Oct 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My TV doesn't have picture its fuzzy in different areas not the whole screen and makes with clicking noise when its turning on.


Invariably the HDMI cable that you are using to connect the signal is bent and pressing hard against the wall. Can you verify with other ports and other sources.

Feb 06, 2016 | LG 60PV250 60 in. Plasma HDTV

2 Answers

HDMI PROBLEMS


sounds like the picture on you tv is set on fit to screen mode try under menu set picture to different setting there should be a normal setting

Mar 02, 2014 | Toshiba 42AV500U 42 in. LCD HDTV

1 Answer

No audio output device installed


Under sounds no audio is installed, scan for hardware changes, still no luck try this: Try a "Cold-Start",Remove all media, DVD, CD, USB..etc., Remove AC plug, Remove Battery, Hold down on/off button for 10 seconds, Replace battery, Plug into AC outlet,Push on/off button and Start normally. Check device manager for audio, scan for hardware changes. reconnect to tv.

Nov 06, 2012 | Computers & Internet

1 Answer

On my advent roma 2000 laptop, randomly the screen went black when i turn it on but it comes on at the start for 2 seconds then goes off..? what do i do


its overheating,check whether your fan is working, otherwise open it and clean it out, do not use a blower, the spinning fan can overcharge your motherboard and blow it

Oct 23, 2012 | Advent Computers & Internet

1 Answer

My Samsung TV picture is supplied via a HDMI lead


yes you need to connect audio out from the tv to audio in on the dvd surround. you need the red/white phono to phono leads, simply connect together and select audio (av,au) on the input selection.

Feb 20, 2010 | Samsung LN46A650 46 in. LCD HDTV

1 Answer

White/Grey screen with non-HD channels


I removed the HDMI cable and connected with component video and rca audio. No more white screen.

Picture quality looks good. I don't know if it's as good as HDMI, but then I don't need to reboot the TV three times to get to teh on-demand menu... Grrrrr....

I am trying to contact Toshiba on this as well. I have seen several reports of this problem on the web.

Dec 04, 2009 | Toshiba 19AV500U 19 in. LCD HDTV

2 Answers

Not able to get picture when connected to PC via HDMI


bbutler,
Your Toshiba can handle PC screen resolution up to 1024 x 768
Lower the resolution of the PC screen to somewhere between "640 x 480" and "1024 x 768". It will work just fine.
It's not likely that there is a any physical problem with either the PC or HDTV.
1. Right-click anywhere on your desktop
2. [Properties]
3. [Settings] tab
4. Slide the "Screen Resolution" pointer to the LEFT to adjust and click on [OK]
*DONE*

Oct 16, 2009 | Toshiba 37RV525R 37 in. LCD HDTV

1 Answer

If I tap the rca jacks in the back the screen gets distorted


You need a hdmi connector from your tv source to the TV. RCA connectors don't have the capability for HD signal transmission. You can use them for a connection but the picture will be fuzzy if trying to watch HD signal. Check your cable/dish box to see if there is a hdmi output. If so, buy a hdmi cable & that should solve your problems.

Mar 19, 2009 | Akai LCT4216 42 in. LCD Television

1 Answer

52D82U Fuzzy picture


Change your input source. You are probably on Input Source "TV". My HDMI cable is plugged in INPUT 4 so make sure that your TV is set to the right INPUT.

Oct 07, 2007 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

Not finding what you are looking for?
Dell Latitude E6500 Laptop Logo

693 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...