Question about HP OfficeJet Pro K8600 Printer

1 Answer

It was printing ok in tabloid size paper, suddenly, after reinstallation of my winxp PS, it is printing halfsize on my tabloid size paper.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,653 Answers

Having reinstalled the driver check both the printer and also the print driver for a zoom setting that would show as 50% as a default. This is most likely to be on the print driver setup on the PC. This can also happen if you get a combination of 'zoom to fit' and then change the orientation from portrait to landscape and vice versa so check this setting as well. You can avoid this by setting auto adjust for rotation from portrait to landscape and vice versa.

Posted on Oct 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

HP PRINTER 5P/5MP REMOVED PAPER JAM. STATUS IS "OUT OF PAPER" PAPER TRA IS FULL.


There is a small switch inside whee the paper is that needs to be set (pressed) against by the paper.
Check to see if the switch was damaged or maybe there is a peice of paper in there yet at the paper tray preventing the switch frombeing pressed by the paper.

Apr 08, 2008 | Office Equipment & Supplies

1 Answer

On the Ip4300 the yellow light flashes at 10 times intervals. The printer does not responde to anything. Thanks Dave


This is from Canon's web site...

Ten flashes:The Cassette is not installed properly/Cannot perform duplex printing
  • When loading from the Cassette, install the Cassette properly and press the RESUME/CANCEL button.
  • When performing automatic duplex printing, the size of paper may not be compatible with automatic duplex printing. The sizes of media suitable for auto duplex printing are A3, Regal, 11" x 17" (Tabloid), B4, A4, Letter, 10" x 12", 8" x 10", B5, and A5". Make sure that the size of the paper loaded in the printer is correct. Pressing the RESUME/CANCEL button will eject the paper and restart printing from the front side of the next paper. The reverse side of the ejected sheet will not be printed.

May 04, 2011 | Canon PIXMA iP4300 InkJet Photo Printer

1 Answer

Problem with Canon Pixma 4300 inkjet. Orange alarm lamp flashes 10 times on switching printer on. Have tried plugging and unplugging power cord, and checked that there is no paper jam. Please help. Brian


Hello Brian,

I found the following on Canon's website.

Not sure if it will fix your issue but thought it might be worth a try:

Ten flashes:The Cassette is not installed properly/Cannot perform duplex printing
  • When loading from the Cassette, install the Cassette properly and press the RESUME/CANCEL button.
  • When performing automatic duplex printing, the size of paper may not be compatible with automatic duplex printing. The sizes of media suitable for auto duplex printing are A3, Regal, 11" x 17" (Tabloid), B4, A4, Letter, 10" x 12", 8" x 10", B5, and A5". Make sure that the size of the paper loaded in the printer is correct. Pressing the RESUME/CANCEL button will eject the paper and restart printing from the front side of the next paper. The reverse side of the ejected sheet will not be printed.

Best of luck
]

Regards

Mar 02, 2011 | Canon Office Equipment & Supplies

2 Answers

Print legal size paper problem


when you give print command that time chage the paper size from a4 to legal in print proeprties and choose paper size legal.

Sep 08, 2009 | Canon LASER SHOT LBP-3000 Printer

1 Answer

CLJ8550n poor print quality and wrinkled paper


this is usually not caused by the paper tray. this problem is usually caused by the fuser assembly. check your paper path. dead cycle the printer, shut the printer down before the paper enters the fusing area, check for wrinkles. remove all paper, print again, check the output, wrinkles, replace the fuser.

Feb 03, 2009 | HP Color LaserJet 8550n Printer

2 Answers

Cannot print on 11 x 17 paper from one program.


hi jocelyn912 you have to adjust the paper size frome the printer propertise to fix the papesize to 11x17 ore to A3 size also tray to print via offica aplecations such as word . tray and let me know if the problem sold thanks.

Nov 21, 2008 | Gestetner Copier

1 Answer

Paper Type and weigth Fot Lexmark C912


Media paper weight: is 20lb or 75gsm.
Media type: card stock, envelopes, Glossy paper, Paper Labels, Plain Paper, Transparent.
Media size: A3, A4, A5, Banner up to 11.69"x36", Executive, JIS-B4, JIS-B5, Ledger, Letter, legal, Super Tabloid, B5, C4, C5 DL, 7 3/4 9, 10 Envelopes.
demension is in inches, you need to convert it to centermeter.

Oct 30, 2008 | Lexmark C912 Led Printer

1 Answer

Printing a booklet on WorkCentre 7345 , need help argent !!!


OK, same problem, I've gotten through the solution. I can print and have the first page and last page on one side of the large sheet and the two inside pages on the other side, so that is foldable into a booklet.
I start with a 4 page (US letter sized) document I wish to print as a booklet on tabloid paper.
In the (page layout or editing program's) print dialogue, I've said print all pages, set it at 1 page per sheet, then clicked the printer properties button to open the Xerox Workcenter 7345PS option dialogue.
In the Xerox dialog on the "Paper/Output" tab, selected the larger (Tabloid, 11x17" in my case) paper size, selected 2-Sided Print. Then I select the "Layout/Watermark" tab and clicked the Booklet Layout radio button, chose "Landscape" for the Page Layout Option. Note: I saved these settings as "Tabloid Booklet" by clicking the down-arrow to the right of "Driver Defaults" so that I could select them and not have to dial in every one of the settings whilst experimenting.

Apr 11, 2008 | Xerox Office Equipment & Supplies

1 Answer

Won't print tabloid paper


I had this problem a couple of years back and took the printer to a service company. They replaced the paper pickup rollers and I have not had the problem since. Other problems, yes, but not that problem.

Aug 16, 2007 | Apple LaserWriter 8500 Printer

Not finding what you are looking for?
HP OfficeJet Pro K8600 Printer Logo

423 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...