Problem synchin MP$ multimedia player

Hi lcharlingen3...
Downloading Music to your MP3 Player

1...You must download and install Windows Media Player 11 on your computer.
NOTE...Some older MP3 players will not work with Windows Media Player 11 or Windows 7 with Windows Media Player 11.
If this happens to you, then you will have to uninstall Windows Media Player 11 and install Windows Media Player 10.
2...After you have downloaded and installed Media Player on your computer.
3...Open Media Player on your computer.
4...Install all your music into Media Player that you want to install on your MP3 player.
5...Plug in your MP3 player to the computer using your Data/Sync cord, be sure that Windows Media Player is on.
6...Media player should recognize the MP3 player and sync with it.
7...After it is sync'ed with the computer,you can add the music you have installed into Windows Media Player to your MP3 Player.
Please take time to rate me thumbs up.

Hi
NOTE: When downloading music to MP3 Player make sure your using the right format for your player.
**********************************************************************************************************

1...You must download and install Windows Media Player 11 on your computer.
NOTE...Some older MP3 players will not work with Windows Media Player 11 or Windows 7 with Windows Media Player 11.
If this happens to you, then you will have to uninstall Windows Media Player 11 and install Windows Media Player 10.
2...After you have downloaded and installed Media Player on your computer.
3...Open Media Player on your computer.
4...Install all your music into Media Player that you want to install on your MP3 player.
5...Plug in your MP3 player to the computer using your Data/Sync cord, be sure that Windows Media Player is on.
6...Media player should recognize the MP3 player and sync with it.
7...After it is sync'ed with the computer,you can add the music you have installed into Windows Media Player to your MP3 Player.
Please take time to rate me 4 thumbs up.

DAB 206
MP-408 - QUICK START GUIDE
MP-508 - QUICK START GUIDE
DAB 206
MP-408 - QUICK START GUIDE
MP-508 - QUICK START GUIDE
Hi nicholasharp...

You did not say which model you had so I copied what I could find in manuals for Technika MP3 Players. I am sure you will find the user manual to explain when your MP3 player is fully charged.
I will also include the generic way to hook up and download songs to your MP3 player.
Go to the webpages below and download your User Manual and Quick Guide.
Please take time to rate me

User Manual...http://safemanuals.com/zearch_8288.php

Quick Guide...http://safemanuals.com/user-guide-instructions-owner-manual/TECHNIKA/DAB-206-_E

Quick Guide...http://safemanuals.com/annexe_QUICK%20START%20GUIDE_TECHNIKA_MP-408-_E.htm

Quick Guide...http://safemanuals.com/annexe_QUICK%20START%20GUIDE_TECHNIKA_MP-508-_E.htm
--------------------------------------------------------------------------------------------------------------------------------------------
Downloading Music to MP3 Player

1...You must download and install Windows Media Player 11 on your computer.
NOTE...Some older MP3 players will not work with Windows Media Player 11 or Windows 7 with Windows Media Player 11.
If this happens to you, then you will have to uninstall Windows Media Player 11 and install Windows Media Player 10.
2...After you have downloaded and installed Media Player on your computer.
3...Open Media Player on your computer.
4...Install all your music into Media Player that you want to install on your MP3 player.
5...Plug in your MP3 player to the computer using your Data/Sync cord, be sure that Windows Media Player is on.
6...Media player should recognize the MP3 player and sync with it.
7...After it is sync'ed with the computer,you can add the music you have installed into Windows Media Player to your MP3 Player.
Please take time to rate me

Hi
Downloading Music to MP3 Player

1...You must download and install Windows Media Player 11 on your computer.
NOTE...Some older MP3 players will not work with Windows Media Player 11 or Windows 7 with Windows Media Player 11.
If this happens to you, then you will have to uninstall Windows Media Player 11 and install Windows Media Player 10.
2...After you have downloaded and installed Media Player on your computer.
3...Open Media Player on your computer.
4...Install all your music into Media Player that you want to install on your MP3 player.
5...Plug in your MP3 player to the computer using your Data/Sync cord, be sure that Windows Media Player is on.
6...Media player should recognize the MP3 player and sync with it.
7...After it is sync'ed with the computer,you can add the music you have installed into Windows Media Player to your MP3 Player.
Free Answer...Please take time to rate me

Hi, player not recognized by the computer

This may be caused by one of the following:
1. Minimum system requirements were not met.
2. Corrupted drivers.
3. Computer restrictions.
4. Power issue.

To resolve this issue, try the following solutions:

SOLUTION 1 - For brand new player or first time connecting to this computer.

For Windows XP users: verify the following operating system requirements are met.
- Windows XP SP2 or higher
- Windows Media Player 10 or higher

Download and install the latest Windows Media Player if it's not installed.

For Windows Vista users: If the player is seen in My Computer when using MTP mode, but not showing in Windows Media Player.
- Download the hotfix from http://support.microsoft.com/kb/939211.
- Run the hotfix.

For MAC users, see Sansa player not recognized by a MAC OS

NOTE: If you are trying to connect to a Computer at work that is part of a network, there may be user right restrictions that are set to disable access to new hardware or stop any program installations. You may need to check with your IT administrator to see if this is causing the problem.



SOLUTION 2 - Refresh the driver

STEP 1 - Connect the Sansa player to the PC
The screen on your player should turn on, show 'Connected' and indicate the battery charging or full.
- If the player does not turn on try other USB ports or on another computer if one is readily available. Ensure you are connecting directly to the computer USB port and not to a USB hub.
- If there is nothing showing on the screen and the player does show up in as a storage device in an explorer window, then the screen is just not working.

If you receive the error "USB Device Not Recognized" on the computer, the player is most likely failed. Additional troubleshooting is unlikely to correct the problem.


STEP 2 - Check under Device Manager
1. Right-click My Computer, and select Manage.
Image
2. Click Device Manager on the left pane.
Image

NOTE: Sansa MP3 Players can connect to your computer in MSC or MTP mode. Exceptions are mitone mp4 player Connect and mitone mp4 player Express which only use MTP mode. MTP mode is the recommended and default method for mitone mp4 player Players when used with Windows OS.

The mitone mp4 player player will show up on Device Manager's right pane as:
1. USB Mass Storage device (if the player is set to MSC)
2. Portable Device (if the player is set to MTP mode)

If there is a yellow exclamation point (!) or question mark (?) beside the device, try to refresh the drivers.


STEP 3 - Refresh the drivers
1. Right-click the entry with the error mark, select Uninstall.
2. On the top menu, click Action then select Scan for hardware changes.

NOTE: If a device with yellow exclamation point (!) continually appears and disappears, then the player is most likely failed. Additional troubleshooting is unlikely to correct the problem.



SOLUTION 3 - Connect using MSC mode
Connecting in MSC mode will help determine if there is a problem with MTP mode or with the Auto Detect mode feature of the player. You can use Forced MSC mode or switch the player settings to MSC.


If the player is detected in MSC mode but not when set to MTP mode, try to update or reinstall the mitone mp4 player firmware

NOTE: mitone mp4 player Express and mitone mp4 player Connect do not have MSC mode. For mitone mp4 player Connect you can try reinstalling the firmware using the Connect Recovery Mode.

Additional troubleshooting notes:
If you have replaced the mitone mp4 player Player and you still have problems getting it to recognize in the computer, then you may need to try some additional troubleshooting.
- Try connecting on another computer.
- Try using a different USB cable
- Try connecting to the back USB ports which may supply better power.
- If only MTP mode is not working, try reinstalling Windows Media Player
For Windows XP try also download and install the MTP Porting Kit.

Hope that helped And please don't forget to rate me..

Have a nice day....

Hi,
It is not required to install any Driver for connecting the Walkman Player to the Computer. The Driver for recognizing the Walkman Player as a MTP Device is already installed in the Computer. You can install the supplied Windows Media Player 11 Software for transferring the files to the Player. You can either Drag and Drop the files using the Windows Explorer to the MUSIC Folder which appears as a Removable Drive or can use the Windows Media Player 11 for transferring. If the Player is not recognized by the Computer, try connecting to different USB ports and try re-installing the USB Driver from the Device Manager.
Thank you for using FixYa!

Hello,

Having devices connected during reinstallation of the Operating System will lead to a faulty detection on the USB ports.
Connected devices will not be recognized.

How to get the USB ports functioning again:

>0. First disconnect all apparatus connected to the USB ports.

Step 1.1 will take a long time again, I'd prefer step 1.2:
1.1 Perform a new installation of Windows XP (the long way) or
>1.2 Delete all USB hardware in the Control Panel (the short way).

>2. Install the software for your device and perform an update.
Update Windows Media Player 11 and / or Coby Media Manager.

>3. Open the software WMP11 or the Coby Media Manager.
Connect the device and make a setup for connection in the
software you use.

When you need more help for software or hardware configuration, just add a comment.

hi,install windows media player 11 and is ok.

I didn't have a problem accessing the flash memory of my Coby mp4 until I upgraded to Media Player 11. Now it recognizes the coby for what it is, but I can't explore the flash memory like I used to. It used to recognize it as another drive, now it shows up as a portable media device. Do I have to go back to MP10 to get it back or is there another way?

Before opening it in Windows Media Player, turn on the device, go to SETTINGS, make sure USB mode is set to MTP, that is the mode it needs so Windows Media Player can recognize it.