Question about NetGear WGR614 Wireless Router

1 Answer

Router setup i need set by set help setting up

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has answered 200 questions.

  • Expert
  • 277 Answers
Re: router setup

All -

In general I suggest getting a
First get a wired computer working
-- less complex and fewer issues, normally.

Second try to get unsecured wireless connection working

Third secure your wireless network.

Fourth where appropriate, deal with game connectivity issues.

One link that may help follows
use this this find the exact version of your router. Click on the appropriate support link. Under "Other Useful Documents" the contents vary (have not checked what is available under all versions) but the first document of interest should be the

"ISP Configuration Guide" which should get you well on the way to connecting computers.

For those of you with games there are
xbox instructions for some of the routers
There appear to be general game related instructions for more routers.

Because of the variability of your situations because it is unlikely you all have the same ISP I suggest you all open new issues where you - Identify the router and version, identify your specific ISP's and any additional requirements including wireless connections, game consoles or other devices to hookup if you need additional assistance.

Posted on Jan 08, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to setup a DIR505 as a repeater in home. BSNL broad connection with modem modelDNA-A211.1. I am unable to setup

Yes here is your answer.
First setup for your modem. Click on this link and see detail. If you want zoom step photos in this help link page click on that photo which you want to zoom in.
BSNL Broadband Solutions

Secondly your router configuration, this settings are common for all compatible routers, so please refer your router's user manual for enter these values / settings.
Below I give you that your internet router settings help page link and router's user manual link.
Broadband setting help: Dheeru24k Pvt Sys Admin
Router's User manual:

Jan 02, 2014 | D-Link DIR-505 Wireless All-in-one Mobile...

1 Answer

Ive lost my password on my laptop and reset my router to factory settings. So now my dell 1410 vista tells me it wont connect to an "Unsecure" network. Can i reset my laptops password for the...

1. you will need the original CD to setup the router again and set a new password for the router.
2. go through the set wizard which will prompt you with additional steps to setup router and other wireless devices
you will need to contact your provider for additional help such as ip address and ssid information.

Jun 13, 2011 | NetGear WGR614 Wireless Router

2 Answers

How do I set up a password so others cannot access our internet? someone told me i have reset button on router but i don't

No need to reset the router.
You just need to open the set up page of the router.
Once you open the set up page of the router, you will find the wireless settings.
Set up page is the page of the router where you will find the settings of the router and you can change settings of the router.
Now to open the set up page of the router , you will need to check the IP address on the computer. There might be a password on the router.
If you don't know the password of the router, then try the default password for the router.
If the default password doesn't work then you will need to reset the router and reconfigure the router.

Click Here for Easy steps

Feb 25, 2010 | NetGear WGR614 Wireless Router

4 Answers

No Setup CD

Are you trying to set up the router ?
You can do it without the CD. You can do it manually.

First make sure that your computer is able to go online when connected directly to the modem.
Then connect the modem and computer to the router and check the settings of the router.

Click Here for step by step solution

Nov 27, 2009 | NetGear WGR614 Router

2 Answers

We recently moved and set up the computer. I have

Moving means that you have to setup the router again. The WEP key has to be setup again. Your old settings were for old location. Could be same settings, but they have to be setup again.

Nov 08, 2009 | NetGear WGT624 Wireless Router

1 Answer

Dlink router setup, no internet connection?

You will need to check the settings of your router.
or you will need to set up your router with th DSL connection.
It is very simple.
Click Here for More info

Oct 06, 2009 | Routers

1 Answer

After installation,congratulation! but actually

HI! I bliv u are having some issue setting up ur router.. I will be more than glad to assist u. Dont use the setup cd, sometimes it works, sometimes its not. here are the steps u need to do:
1. press the reset button on the back of the router for 15sec.. after that unplug the router for 15secs then plug it back in..
2. connect the ethernet cable to port1 of the router and the other end to the lan port of your computer..
3. pull up ur browser then type at the url: it will ask u the username and password, by default the username is admin and the password, just leave it blank
4. it will show the setup page of the router. u can set the router on the specific internet setup that u have.
a. if ur isp is a cable company, normaly u need to do a mac clone on the router setup page by cloning the computer that is reg to the cable company, how to determine it. ex. the computer that is reg to the cable company is a desktop or laptop, if this computer is connected to the modem directly and u can access internet.
b. once u determined it u need to connect this computer directly to the router and do a mac clone and set ur internet settings to auto-dhcp..then save the settings and after that, unplug to the power of the modem and router, plug in 1st the power of the modem then once all lights lit, plug in the router, then once all lights lit, try to pull up a browser that ur computer is connected directly to the router.. ur cable connection shud be, cable from the modem will go to the WAN port of the router and connect ethernet cable on port1 going to the lan port of the computer..once u can access the internet, u can now access again the setup page of the router by typing at the url: and u can setup the wireless settings, u need to create a ssid or wireless name and a security..
5. If ur isp is a dsl normaly they give u a username and password to connect to the internet, ur settings on the router should be PPPoe
6. If ur isp gives u a static ip address settings, u need to set the router to isp setup.
a. how to check the isp of the isp given to u..
1. click on start
2. run
3. type cmd
4. it will show a dos prompt
5. from the dos prompt type ipconfig/all
6. it will list the ip address, subnet, default gateway, dns server
this settings should be type in to the settings on the router for static ip addressing..

if you have any querry pls feel free to get in touch.. good luck

Aug 15, 2009 | Linksys WRT160N Wireless Router

2 Answers

No CD need to set up Linksys Wireless G Router

this type of problem can be fixed very in simple steps :-
reset the router and install linksys router setup from linksys site
go to wireless settings and setup user name and password
now follow the instractions and try to connect your devices for more assistance contact LINKSYS Tech Support . i hope this will help you thanks

Nov 15, 2008 | Linksys Wireless-G WRT54GS Router...

2 Answers

Linksys Wireless G Router Set up

I ended up loading the router setup cd onto another laptop, and it worked fine. I still don't know why the first laptop had the error code, but they now both, work perfectly fine. Thanks, anyway.

Sep 06, 2008 | D-Link DI 514 Wireless Router (DI-514)

1 Answer

Cant not setup my d-link router 300

connect to the router by cable
is the routers web address, will open the menu set to set up the router, and allow access to a set of helpscreens to explain setup of the router

Jul 14, 2008 | Routers

Not finding what you are looking for?
NetGear WGR614 Wireless Router Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Routers Experts


Level 1 Expert

31 Answers

 Mike M
Mike M

Level 3 Expert

3320 Answers


Level 1 Expert

36 Answers

Are you a NetGear Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides