Question about RCA F27676BC TV

2 Answers

No Video I was given this TV and I don't have a owners manual or a remote for it. I am trying to hook up my DVD player, but I can't figure out how to get the TV into video mode. I have gone through the menu and didn't see it there. I put the TV on channel 3 and played a DVD and the screen didn't change at all. We do not have cable on this TV. We do have an antennae (rabbit ears) so we can get a couple of local channels. Any help would be greatly appreciated. Thank You. trying to install Logitech 520 remote, with Yamaha receiver, RCA DVD player and DirectTV modem. Have completely redone cables according to Yamaha receiver instructions. Have completely, according to Logitect software and online help, programmed 520 remote. All I can get is SNOW on the TV screen. Since I do not have the remote for the TV (all other devices involved were used to program the Logitech 530), I feel this must be where my error(s) are. Any help would be appreciated. George

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,944 Answers
Re: No Video


Here is something that will definitely help you...the user manual for your TV. Check out chapter 3 page 38: Auto tuning feature.

Posted on Dec 22, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert that has over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 317 Answers
Re: No Video

Have you tried using 01 or 00 as a channel to view your DVD input?

Try that...
Also, try looking for your manual here:

Good luck!

Posted on Dec 22, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Dvd hookup

It sounds that you are connected the TV with DVD player Via AV cable. In this case, no RF channels won't go. You have to select its AV option. Check it. Refer the user manual for TV.

Aug 12, 2013 | RCA F19251GY 19" TV

1 Answer

Zenith C27A24T 27" TV does

Greetings - You need to have you DVD player hooked up to the video inputs - See below. Don't mind the mouse scratch out lines. The Device on the right represents your DVD player.


You then have to choose video as your source on the TV (not channel 3 or 4) using your remote - see below.

You should be good to go.

Enjoy your movies,


May 22, 2011 | Zenith C27A24T 27" TV

1 Answer

Cannot get the tv into 'video1' (or ' video2') mode

Unfortunately you need the original remote. There is still a good chance you can find a Sanyo universal remote. Check your local Circuit city or Super K mart or Walmart and look inthe electronics sections. I have often seen the Sanyo universal remote! And yes it will have the options you are looking for. Good Luck!

Apr 19, 2010 | Sanyo DS27820 27" TV

1 Answer

Can't figure how to hook up a dvd player to my model 1359 tv. this was given to me without booklet

if your tv has a a/v hook up you will see a set of plugs that are the same colors as the wires coming out of the dvd player just plug in the wires to the corresponding plugs, then turn your tv to either a/v mode or video mode using the input button on remote, depending on the # of devices your tv can accept it may say video 1 etc.

if you don't have the corresponding plugs on your tv you may need to visit your local electronics store to pick up a converter or see if they have a less expensive solution

hoped this helped

Dec 21, 2009 | Orion Standard (CRT) Televisions

1 Answer

Hooking up & seeing a dvd player?

does the dvd have a coax output for coax antenna input on the tv? you can use that untill you can get the video input selection straight with the tv and a remote that supports rca's extra functions such as menu , tv/av button
also if there is a( wake-up) on/off timer in the tv menu , then you can also set it to come on with the video input instead of a tv station,set it a few minutes after the time it is when you set it( then just turn off the tv set after the time is set and you have exited the menu, then it will come on with the video input instead of a tv station)
otherwise you will need that remote that supports the video input selection on your tv

Jan 08, 2009 | RCA F20625 20" TV

1 Answer

No manual to figure out how to configure video settings for games

It's March 30, 2009 and I just tried hooking this same tv up with the DVD player. No remote and was ready to throw the TV out the window. Another question on this same site helped me figured it out. There is no input button. You have to plug the DVD or video system in and then go to channel 91. That's the default channel for input 1. Strange but it worked.

Dec 13, 2008 | GE 25GT240 25" TV

1 Answer

No Video

You can get a converter box for dvd hookup to the cable connector at the back of the set at Wal Mart or Radio Shack.

Dec 27, 2007 | Sanyo DS27910 27" TV

1 Answer

Durabrand Tv.

If the TV has a tv/video button on the front
panel you can switch to video and just
operate the DVD with the DVD remote
If there is no TV/VIDEO switch then you
will need a universal remote with TV/VIDEO
menu,PIP etcIf you dont have a remote for
the dvd player the solution is basically the
same a universal remote howerver you can
operate the dvd player from the front panel

Nov 20, 2007 | Durabrand DWT1905 TV

1 Answer

DVD player not showing on tv

I'm not sure, but, if you use the channel down button on the television, the set may go to the video inputs. If not a local retailer should have an inexpensive universal remote that would work on this set and have an input or tv/video button. If you use a cable box, the remote can be programed also. If you need more help, reply to this post and I can come up with more solutions when I get to my shop next week.

Aug 06, 2007 | RCA F32668 32" TV

2 Answers

How to hook up a DVD player

Go to this link; and a short way down under "Product Details" there is a link to the product manual page 7 and 8 of the manual (page 9 and 10 of the pdf file) should tell you what you need to know. Please post again if you still have trouble; Hope it helps :)

Mar 29, 2007 | RCA F32450 32" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

389 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66623 Answers

John mullen

Level 2 Expert

229 Answers


Level 3 Expert

2963 Answers

Are you a RCA Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides