Question about Whirlpool Cabrio WTW6600SBT Top Load Washer

1 Answer

AS SOON AS WE START A LOAD OF LAUNDRY IT STARTS UP AND THEN BEEPS WITH AN "F1" MESSAGE ON THE SCREEN. IF WE HIT PAUSE/START THREE TIMES ITLL FINISH THE WASH WITH NO PROBLEM. HOW MUCH WILL IT COST TO GET THIS FIXED?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

HE Top Load Washers
Models:
F1 Error Code
WTW6200S WTW6300S WTW6400S WTW6600S WTW6700T
MTW6300T MTW6400T MTW6500T MTW6600T MTW6700T
Serial Numbers: CT01 - CU52
There are four areas of concern that can cause the F1 Error Code. Each area must be sequentially addressed to ensure
that the diagnosis is correct and the proper repair is completed.
A) Air leaks in the air pressure (switch/sensor) hose.
a. Inspect the hose for cracks, pin-holes or loose connection.
b. Replace the hose and harness assembly (W10058730) if it is compromised.
B) Moisture in the air pressure (switch/sensor) hose.
a. Inspect the hose for evidence of water.
b. Replace the hose and harness assembly (W10058730) if water is detected.
C) Lint or flashing in the air dome hose connection port.
a. Inspect the air dome hose connection port for lint or flashing.
b. Use a small round device (small screwdriver) to ensure that there is nothing blocking the air dome outlet on
the tub.
D) The control needs to be replaced.
a. Replace the control only after you have completed steps A - C above, and verified that there are no issues
with the air pressure system.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.@#$%

Posted on Sep 21, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

System setup screen


when you first start your computer and the screen is black a prompt will in the upper screen will tell you to hit f1 or f2 to enter setup. If you miss it or dont see it let windows finish loading then restart your computer and hit f1 and f2 several times right away and it should enter the setup or cmos page.

Nov 03, 2013 | Computers & Internet

1 Answer

My washer stops in the middle of cycle and it says F1 whats that mean? I have to press pause then start seval times to finish the load. how do i fix it?


It is a known issue with these washers - there is a computerized board in the panel that needs to be replaced. I had this same problem and felt like I could have launched the space shuttle with fewer button pushes than a load of laundry took. I called Whirlpool and they came out as it was a recall item - did not cost me a cent.

Oct 19, 2011 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

This problem just started yesterday.When booting up,the first screen with the white bar goes across,then it goes to a black screen and beeps once with the message,hit F1 to reboot or F2 to setup menu,but...


restart your computer press F8 then click restore the directory setting this will restore all the directory in the system and the system will reload properly if this doesn't work you will have to re install the OS

Jun 28, 2011 | Dell OptiPlex GX110 PC Desktop

1 Answer

Error code f 1


Hello, our carbio began flashing the F1 error code at 18 months. I have to hit the pause/start 4 or 5 times to get the cycle to begin. It also flashes occasionally at the rinse cycle (17 min.) I have called Whirlpool 3 times with little satisfaction. They have offered to pay for the part, but I will be responsible for the service call, diagnostic fee, and labor. I am not satisfied with this offer. It is obvious to me with so many others experiencing the same problem that Whirlpool has a quality issue with this machine. The sales rep who sold me the machine said to call Whirlpool everyday until they are sick of hearing from me. The more calls logged about the complaint, the better chance of a recall on the machine. If this is not resolved, I will NEVER buy Whirlpool again.

I have started a petition to be sent to the CEO of Whirlpool Corp., Jeff Fettit.
Follow the link, and please sign it! The more the better! Spread the word!
You may also copy and post it to any other groups/discussions about this problem.

http://www.petitiononline.com/cabrio08/petition.html

Thank you

Jul 14, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

When we try to wash a load of laundry after a couple minutes we get the code F1 show up and the wash cycle turns off. What is F1 and how can we fix it so the Whirlpool Cabrio washer will work again?


We have had the same problem for three years. We are only using this washer about 4 months a year. We has two service calls..no help. We had to baby sit the washer just like all the other posts, pressing pause about five or six times or more.

Well, I read the posts & that Whirlpool had fixed this problem, paying for parts & labor..we called..they sent a repairman. It took him 20 minutes, he asked if this was the code, said he carried at least three of these parts & now..the washer has been running fine. three loads so far.

So, call them, tell them the problem & it will be fixed at no expense to you..or should be.

Jun 29, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

FTF2140ES0 Frigidaire Washer Won't Start


Yes - often times the plastic breaks from slamming the door.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Jan 12, 2009 | Washing Machines

Not finding what you are looking for?
Whirlpool Cabrio WTW6600SBT Top Load Washer Logo

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2122 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...