Question about D-Link 802.11g Wireless Router WBR-1310 (WBR1310)
To set up a security on your wireless network, you will need to open the set up interface of the router.
You must have a computer connected top the router with the cable.
Check the IP address of the computer. Click START. Go to RUN ==> in the RUN box type cmd and click ok. you will see the command prompt. in the command prompt type in " ipconfig " and hit ENTER on your key board.
now you will find the Default gate way number. That is the IP address of your router. note down the default gateway number.
Open the Internet browser Like Internet Explorer of Firefox.
In the address bar, type the default gateway number. do NOT type http:// or www. click go or hit hit enter.
It will ask you for the user name and the password. that is the password of your router. for most of the router the default password will be " admin ". If you have changed the password of the router then you can try that password.
It will open the set up page of your router.
On this page you will all the settings that you can change on the router.
Go to the wireless setting tab and you will find the option for wireless security. Here you can change the wireless security.
Remember your computer will be hard wired to the router till the time.
Click Here for more info
Posted on Oct 06, 2009
The nice thing about D-Link is that they are there 24/7, and available to help. Here is their contact number:
phone: 1.877.45D-LINK (1.877.453.5465)
Give them a call and explain what it is you need, and they will be happy to help.
While the suggestions, above, are good ones, going to the source cannot be beat. So call D-Link and see if they can help you get this set up just the way you want.
Posted on Dec 12, 2009
1) Open the internet browser and type the address 192.168.0.1 to login to the router. The default username is "admin" and leave the password box empty.
2) Click "Wireless Settings" on the left side.
3) Select the Security Mode = Enable WEP Security.
4) Select the Authentication = Shared Key.
5) Select the WEP Encryption = either 64-bit or 128-bit.
6) Select the Key Type = HEX (only A-F and 0-9 number allowed) or ASCII (all number and character allowed).
7) Enter a WEP key as your security password to login to your wireless later.
8) Press Save Settings to save all settings changed. Reboot the router.
Posted on Oct 05, 2009
The encryption ket is configured from the router's wireless setting.
1. Start your browser and enter the router's configuration URL
2. Enter the router setup login and password
3. Change the admin password if you have not done so.
4. Go to the wireless settings and change the default SSID and turn off SSID broadcast.
5. Setup encryption key the strongest is WAP2 or WAP if possible.
6. For further security measures - turn on MAC address filtering and enter the MAC address of the wireless cards on the computer/s you want to connect to this wireless router.
7. Record the settings you have made and keep it in a safe place and Save the settings.
8. Configure the wireless cards on the computer/s with the SSID and encryption settings of the router.
Posted on Oct 05, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 07, 2011 | NetGear WGR614 Wireless Router
Jan 04, 2011 | Belkin F5D7234-4 Router
Jan 01, 2011 | Linksys WRT400N Router
Dec 19, 2010 | D-Link DI 514 Wireless Router (DI-514)
Dec 18, 2010 | Computers & Internet
Jun 10, 2010 | Computers & Internet
Jan 24, 2010 | D-Link DIR-615 Wireless Router
Jul 30, 2009 | D-Link Computers & Internet
1,944 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: