Question about Westell Wirespeed VersaLink (A99-327W11-00) Router (A99327W1100)

Open Question

How do I enable UPNP on a Westell VersaLink 327W? I am running Snow Leopard OS X on an iMac.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: VPN through Westell Versalink 327w

ok use this to goet to you setup
http://dslrouter/
and then use this to open ports but you have to chose the program you want to omp it for
http://www.portforward.com/english/routers/port_forwarding/Westell/Versalink-327W/Versalink-327Windex.htm

Posted on Nov 21, 2007

Ad

SOURCE: westell 327w

Your router is for DSL not cable

Posted on May 01, 2008

  • 2 Answers

SOURCE: westell versalink 327w i need default password

I think the password is "password".

Posted on May 25, 2008

  • 9 Answers

SOURCE: Reset router

Unplug the power cord, wait 30 seconds, then plug it back in.

Posted on Jan 20, 2009

  • 18 Answers

SOURCE: westell versalink 327w from bellsouth can't connect

Howdy,

I do not think this modem will work for you. Contact O.T.C. to be sure. For a few details...

I presume that you can access your Westell wireless modem/router 327w with the IP address of - 192.168.1.254. (Or you can simply type "launchmodem" in the address bar - (one word - no quotes)) This will definitely get you in. You will then see the setup menu. If you see the Bellsouth FastAccess Internet Service logo then you know you definitely have a Bellsouth modem.

Now, let's presume, you are using a Westell wireless modem/router 327w made for Bellsouth/ATT. If this is the case, as stated above, you will see the Bellsouth Logo on the setup page. Additionally, it is stated on the page below, that you cannot use a Bellsouth modem/router for any other ISP (Internet Service Provider) This is due to the Bellsouth/ATT firmware that Westell builds into this modem/router.

This is the page link:
http://www.dslreports.com/faq/bellsouth/3.141_Westell_327W__wireless__Info#13772

This is the relevant quote:
"The BellSouth supplied 327W (model C90-327W30-06) is made exclusively for BellSouth FastAccess. They are functionally different from retail Westells (or any model designed for use with other ISPs) and the firmware between them are not compatible and can not be interchanged."

That being said, you still might attempt to use this 327W with orlando telephone company but I do not know if it will work. (Doubtful...) I use the Bellsouth 327W and it is GREAT. (With Bsouth/ATT) Good luck.

P.S. - Please be advised that Westell does manufacture an identical 327W that does NOT have the Bellsouth/ATT firmware.installed. This is the "generic" version I suppose but I have no experience with this one. If you need more just ask. :)

Good luck,

J

Posted on Oct 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Westell Versalink 327W with a strict nat and I want to open it up for Xbox Live. I have tried port forwarding but that only bumps it down to moderate not open. What should I do?


PS3 and Xbox ( NON BELKIN)

You Will Have to Disable the Firewall In Your modem / Router

And IF it is a router then Open The Ports

• TCP 80
• UDP 88
• UDP 3074
• TCP 3074
• UDP 53
• TCP 53

And also make sure that UPnP is Enabled

May 19, 2010 | Westell Wirespeed VersaLink...

1 Answer

My westell versalink 327W router works when my computer is connected to it but it is not sending out a wireless signal


Try the following:

Check if wireless is enabled on the router.

Check if the wireless switch (if any) on the computer is on.

Check if the SSID broadcast is enabled.

Try a different wireless channel (6 or 11).

Hope this helps!

Nov 26, 2009 | Westell Wirespeed VersaLink...

2 Answers

How to configure Westell VersaLink 327W to work with ATT internet


I bought one of these wireless routers a while back and found that these can work well with At&t simply by logging into the router (192.168.1.1), creating an account with your At&t user ID and password, and enabling PPPoE with the VCI set to 8 and the VPI set to 35. Worked well for me for about two years now. Hope this helps

Nov 19, 2009 | AT&T Computers & Internet

1 Answer

My brother just gave me a Westell versa-link model 327w router. there isn't any instruction/opeartor's manual with it. is there a web site with instructions on how to go about hooking this up? Thanx Wayne


The 327w router is distributed by Verizon, an internet service provider. On their website you find tons of info on this model.

Go to the Verizon support page and enter

<westell versalink 327w> in the search field.

Furthermore here some interesting info for you:

Westell versalink 327w Quick Start Guide (700k)
Westell versalink 327w User Manual (10M)

Cheers

Critter




Dec 26, 2008 | Westell Wirespeed VersaLink...

2 Answers

Westell 327W (Versalink)


you want to setup a peer to peer network using a workgroup. File sharing must be enabled in XP and Vista in order to share files. Temporarily disable the firewalls in Windows when setting up the shares....search on the Internet for setting up a Workgroup in XP

Jul 01, 2008 | Westell Wirespeed VersaLink...

4 Answers

Westell versalink 327w i need default password


If the 327 was never set up for wireless you need to connect to it with an Ethernet cable and plug that into your Mac and one of the RJ45 ports on the back of the 327. Type http://192.168.1.1 into your browser, this should take you to the Westell Home Page (Your Router). The default for wireless in this router is disable. There are tabs across the top on the page, select Configuration>Wireless>Basic. This opens the Wireless Operation Window. If Wireless is disabled, click arrow to enable. You can also enable and disable encryption in this same window and if you choose to use the basic WEP in the device, the WEP key is on the label on the bottom of the router. If all this is good your laptop should be able to detect the wireless connection, the default is the serial number on the bottom of the router so you will know which connection is yours. REMEMBER TO CLICK SAVE before exiting the window! Hope this helps.

May 21, 2008 | Westell Wirespeed VersaLink...

1 Answer

Westell 327w


Your router is for DSL not cable

Apr 05, 2008 | Westell Wirespeed VersaLink...

1 Answer

I have a westell versalink 327w date on the bottom is 07/2007


You'll need to go into the administrative interface of the router and enable the wireless network and then you should be able to see if from any laptop/PC with a wireless networking card in it.

Feb 05, 2008 | Westell Wirespeed VersaLink...

3 Answers

VPN through Westell Versalink 327w


do you have login access into the Modem/Router?
if yes, look for port forwarding and set it to your IP of your computer. open port 500 or what ever is required by MS fro the VPN

Nov 01, 2007 | Westell Wirespeed VersaLink...

Not finding what you are looking for?
Westell Wirespeed VersaLink (A99-327W11-00) Router (A99327W1100) Logo

Related Topics:

1,113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Westell Wirespeed Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

arnold balmaceda
arnold balmaceda

Level 1 Expert

13 Answers

Are you a Westell Wirespeed Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...