Question about Garden

1 Answer

Need to know the layout of the drive belt so it can be replaced

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 108 Answers

Depending on your mower (assuming it's a garden tractor) usually there is a belt from the motor to the transmission with a tension pully and then a seperate belt from the motor to the deck with either an electric engage pully or a manual tensenior.

Posted on Oct 05, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Greetings for All I need Peugeot 405 Alternator/Power Steering Drive Belt diagram

a serp belt layout is what you require
is this your vehicles engine... if so
the tensioner needs to be moved and held so you can get the belt on

Apr 29, 2016 | Peugeot Cars & Trucks

1 Answer

Need a belt drive layout diagram

google it make model and belt diagram

May 18, 2015 | Garden

1 Answer

Need serpentine belt layout for 2003 mitsubishi montero

Hi there,

To Remove:
  1. Rotate the tensioner with a ½ in square drive breaker bar until hole A aligns with hole B.
  2. Insert an allen wrench or similar tool to hold the tensioner in position.
  3. Remove the drive belt from the pulleys
To Install:
  1. Install the drive belt on the pulleys.
  2. Rotate the tensioner with the breaker bar and remove the holding tool.
  3. Verify the belt is properly routed on the pulleys.
  4. Release the tensioner to tighten the belt.


3.5L Engine


Sep 16, 2011 | Mitsubishi Montero Cars & Trucks

1 Answer

Have a 2002 RX300 that needs the Alt. belt replaced. Bolts a real pain to get to. Have them (3) loose. Do any need to come out or just loose? Thank you

You are only supposed to losen then. Here are some good instruction with layout that might be of help:


  1. Loosen the pivot bolt and adjusting lock bolt. Torque: Pivot bolt: 38 foot pounds. Adjusting lock bolt: 13 foot pounds.
  2. Loosen the drive belt tension by adjusting bolt and remove the drive belt


  1. Installation is in the reverse order of removal.

To remove the P/S belt, remove the right fender apron. Then loosen the pivot and adjusting bolts, swing the P/S pump towards the engine and remove the P/S belt.

Jun 06, 2011 | 2000 Lexus RX 300

1 Answer

I need a diagram for a serpentine belt 3.8 engine

Hi kimberly_40

here is the belt layout for your 2005 Chrysler Pacifica

FIG : Accessory drive beltrouting: -3.5L engin b> (1) Alternator (2) Automatic Tensioner (3) P/S Pump (4) Idler Pulley (5) A/C Compressor (6) Crankshaft Pulley

let me know if you need anything else

EX f31817b.gif

Standing Member of G.O.T.

Feb 19, 2011 | 2005 Chrysler Pacifica

1 Answer

I need a diagram showing the belt layout for a three balde 42' cut ride on

need main drive belt numbers for 132-520c6701L212G60073 10.5 horse power

Jan 01, 2011 | Mtd LAWN MOWER PART # 983-04162A-0638 DECK...

1 Answer

I have a Toro 13-38HXL riding mower model:28m707.The belt on the deck slipped off the pullies. I need to replace belt but do not know what size or the layout of how the belt is suppose to ride thru the...

go to, it has a great parts look-up database, I have the same mower, I know that is called a "v-belt", not sure where you live but this will at least give you a manufacturer's part # so you can find it locally easier. This site also gives you an exploded diagram so you will see how the belt is routed on the deck assembly.

Jul 19, 2010 | Garden

1 Answer

Need to replace the timing belt need a nanula showing the complete layout of the timing belt system

Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt Diagrams that you will need. Plus additional Instruction and Directional Diagrams you should use.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at!

Oct 29, 2009 | 1994 Ford Escort

Not finding what you are looking for?
Garden Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers


Level 3 Expert

594 Answers

john h

Level 3 Expert

12650 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides