At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
If it turns but stays cold, clean any filters(this should be done after each load) and make sure the airvent/outlet is not covered. somewhere on the back of yor machine should be a reset switch/button, whch protects against overheating, push this in. If it still stays cold the Heating Element probably needs replacing. DIY if competant or grab the yellow pages.If it turns but stays cold, clean any filters(this should be done after each load) and make sure the airvent/outlet is not covered. somewhere on the back of yor machine should be a reset switch/button, whch protects against overheating, push this in. If it still stays cold the Heating Element probably needs replacing. DIY if competant or grab the yellow pages.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The first thing to check is the thermal fuse. It is located in the back of the dryer, and you need to remove the back panel to get to it, which involves taking out about a dozen screws. To check it, unplug the dryer, pull the wires off the thermal fuse, connect them to each other with an alligator clip lead, plug the dryer in and see if the dryer gets hot.
If it turns but stays cold, clean any filters(this should be done after each load) and make sure the airvent/outlet is not covered. somewhere on the back of yor machine should be a reset switch/button, whch protects against overheating, push this in. If it still stays cold the Heating Element probably needs replacing. DIY if competant or grab the yellow pages.
×