Question about Maytag Dependable Clean Top Load Washer, MAV3955EWW

2 Answers

It does not agitate when in the normal cycle and does not drain.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

"Does not agitate" sounds like a broken or worn drive belt. "Does not drain" sounds like a broken or worn pump belt. Since it is unlikely that both belts are bad, I suspect that the next common link, the drive motor, is bad, i.e. your drive motor is either defective or not getting power during the agitate and spin cycles. The primary symptom for a non-operating drive motor should be obvious, i.e., the machine just doesn't run after the wash fill, and it doesn't empty when the timer advances to the spin/drain cycle. If the drive motor does sound like its running, I would then inspect both belts and drive motor pulley for proper operation.

Posted on Oct 05, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My maytag mavt546eww only spins on the last cycle.thats it!!!!it does nothing else...help

Posted on Jun 17, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore 700 series top loader washer. I put it on the normal cycle, the washer fills and agitates for a few minutes (maybe 5) then drains only to fill back up and finish the cycle. Is this normal?


no
some cycle the agitator during the fill cycle to get better distribution of the clothes as it is filling and then shut of the water and proceed to the wash cycle
have a technician check out the program board

Jun 15, 2017 | Kenmore Washing Machines

1 Answer

20922990


michael, try running the wash cycle under different levels eg. normal, delicate etc without a load and see if it agitates.If not, the mechanism has diengaged.

Mar 03, 2014 | Washing Machines

1 Answer

No agitation on extra rinse cycle on Maytag Washing Machine MAV8557AWW


The manufacturer may have found there was little or no advantage to having agitation in the second rinse cycle so omitted it.

Jan 08, 2014 | Maytag Ensignia MAV2757AWW Top Load Washer

1 Answer

Need info about extra rinse cycye


there should be agitation..dont know unless its not making the connection in the control head..

Jan 08, 2014 | Maytag Ensignia MAV2757AWW Top Load Washer

1 Answer

Whirlpool Thin Twin randomly skips agitation during the cycle.


Did you ever figure this out? Mine agitates but instead doesn't start spinning and draining unless I open the lid. It then "clicks" and starts but it is strange that I have to do this to get it to spin.

Dec 20, 2012 | Whirlpool LTE5243DQ 24" Thin Twin Electric...

1 Answer

Does washer drain before the spin cycle starts?


Normally yes. There are around 12 to 20 gallons of water in the tub after the wash cycle, which will be anywhere from 63 to 110 pounds of weight in addition to the weight of the clothes. For the machine to start the spin cycle to remove this water would place a heavy load on the motor, gearcase, pullys, belts, gears, ect. With the water drained, the load is lighter, and much easier to start spinning the excess water out of the clothes. The normal cycles are: Fill, Agitate, Drain, Spin, Rinse Fill, Agitate for rinse, Drain, Spin Cycle and off. Imagine trying to spin a 5 gallon bucket of water over your head, full of water, and then empty. Which one do you think would be easier to do? And safer for you.

Sep 26, 2009 | Admiral AW22 Top Load Washer

1 Answer

Kenmore 90 Series Washer - No Agitator Movement


You need a timer the motor contacts are probably burnt.

Aug 21, 2009 | Kenmore 15864/15862 Top Load Washer

2 Answers

WASHER WON'T SPIN OR AGITATE


Fisher and Paykel pride 5.5. It is about 11 yrs old

Oct 04, 2008 | Washing Machines

Not finding what you are looking for?
Maytag Dependable Clean Top Load Washer, MAV3955EWW Logo

Related Topics:

255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

588 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...