Question about Kenmore Washing Machines

1 Answer

How do I get the pump off my model 110 kenmore washing machine?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 71 Answers

Just follow this video on how to take off the case and you will see the pump down on the bottom attached to the motor.....you will see two metal clips that hold this pump on just take a flathead screwdriver and pop them off and pull the pump right off. You will have 2 hoses that you need to take off and you are all set. Good luck!!

Posted on Oct 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you show me the picture of my Kenmore washer water pump model 110 serial#CF3103864


Model 110 doesn't narrow it down, much. All that tells me is that Whirlpool made it.

What are the numbers AFTER the 110?

Oct 13, 2014 | Kenmore Washing Machines

1 Answer

Machine stops during wash cycle full of water


object stuck in pump, drain water remove and clean pump re start

Dec 09, 2013 | Washing Machines

1 Answer

Washing machine model 110:23032102 is retaining


This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain (it doesn't spin until the pump removes most of the water) machine.

First, see the Sears parts site for your washer:

http://www.searspartsdirect.com/partsdirect/getModel!retrieve.pd?modelNumber=110.23032102&pathTaken=partSearch

and you'll see a list of major sub-components with diagrams and parts.

See the section for the basket and tub assembly's

I'd pull the cabinet in order to get to the hoses going to and from the pump first.

See the following:

http://www.american-appliance.com/catalog/newsdesk_info.php?newsPath=16&newsdesk_id=131

I'd check the hoses for blockage, check the shaft from the motor to the pump and check inside the pump to make sure the inlet and outlet aren't blocked.


Apr 28, 2010 | Kenmore Washing Machines

1 Answer

Kenmore heavy duty 70 series model 110-8237012


probably your drain pump leaking it has a seal right where it attaches to motor,,,,mine is leaking there but haven't replaced it yet! lol

Feb 27, 2010 | Kenmore Washing Machines

1 Answer

My machine is in my motorhome. How would I check


Can you provide the exact Make, Model and Kenmore model number?

Kenmore model numbers use the format ###.######## with the first three digits of 110 for Whirlpool manufactured machines.

Nov 05, 2009 | Washing Machines

1 Answer

My kenmore top loading washing machine won't spin


Once you remove the cabinet,remove the water pump and check it for a garment or lint. Clean or replace the water pump and reinstall it.

Oct 31, 2009 | Kenmore Washing Machines

1 Answer

Excessive lint/ model 110 series machine works


Too little water too many clothes.Drain pump needs cleaning or replacing.

Jul 12, 2009 | Kenmore Washing Machines

1 Answer

Kenmore 80 series model 110 after wash clothes are left soaking


when empty and off, open the lid and see if you can rotate the inner wash basket by hand. if you can easily, then the clutch is worn. This will prevent the basket from going into a high spin and wringing the clothes out. Replace the clutch by removing the top control panel, removing the clips that hold the cabinet, pull cabinet off, remove drain pump clips and pump, remove motor clips and motor, remove transmission (3 bolts). Now you will have access to the clutch, replace as needed, reverse dissasembly to complete. remember to unplug.

Jul 01, 2009 | Kenmore 22422 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2122 Answers

fordexpert

Level 3 Expert

5495 Answers

Mike Carew

Level 3 Expert

969 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...