Question about Minka Acero Brushed Nickel Ceiling Fan

1 Answer

I need a blade bracket for a brushed nickel finish

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 704 Answers

You will only be able to obtain a replacement from either a Minka Dealer that happens to have one in stock, or from Minka directly.

As the Minka is very restrictive with their distribution, it would be best to contact them directly with a request for a replacement part/

Here is the web site for Minka and you can see your model, the Acero, listed on the ceiling fan section. If you look at the bottom of the page, you'll find a "contact us" link that you can use to request information about getting your replacement part. There is also a "dealer contact" link at the top of the page, so you can locate a nearby dealer that might be able to order the part for you, etc.

Hopefully you'll be able to get the replacement blade bracket, as your fan model is still in production, and as such, should have spare parts available.

I hope you'll find this Very Helpful and best regards!

Posted on Oct 12, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I remove fan mounted close to ceiling?

There should be side mounting screws in the canopy which attach it to the mounting bracket. The screws are removed to allow the canopy and motor assembly to drop down free of the mounting bracket. A convenient hook is provided to allow wires to be disconnected.

Oct 23, 2015 | Hunter 20461 Brushed Nickel Ceiling Fan

2 Answers

One of the blades on my Casa Viega brushed nickel fan is falling down, can it be fixed?

Bent??? Or just LOOSE? If it's loose, it can be tightened easily (it probably requires just a screwdriver). If it's truly BENT, it probably can't be fixed - those brackets aren't usually available (they very seldom get damaged), and they're cast so they cannot be straightened. Even if they COULD be straightened, it'd be very difficult to get the bend exactly correct (which is why they're cast instead).

Aug 06, 2014 | Casa Vieja Probe Brushed Nickel Ceiling...

1 Answer

I have a Harbor Breeze 52" Avian Brushed Nickel

If you want to sell your fan I will buy it for me 321-228-3081...I need it with the one I have to mix parts. THANKS

Jun 21, 2011 | Dryers

1 Answer

I have two Tuscany faucets. One in the bathroom and one in the kitchen. Both are brushed nickel and both are peeling. Is this a normal problem with brushed nickel? I'm looking to get a new kitchen faucet...

Brushed nickel finishes can be delicate. Do not use any chemicals to clean. Use a soft damp cloth. Contact the manufacturer and complain about it. I bet they send you replacements, or simply exchange them for new ones at Menards. Remember, no chemical cleaners!

Jan 16, 2011 | Home

1 Answer

I need to buy a blade bracket where can i get one

Home Depot or Lowes has a big selection . Thats were I go alot of those are universal. Hope this helps.

Nov 05, 2010 | Hampton Bay 52 In. Cameron II Plus Ceiling...

1 Answer

Can a brushed nickel soap dish cause green spots to form on white soap

if the finish is scratched and it is brass underneath, yes. Otherwise, no.

Oct 03, 2010 | Grohe Satin Nickel Soap Dispenser...

1 Answer

A broken blade on our Hampton Bay Brushed Nicel Romano

you can call air cool, they manfacture and service the fan. 800-896-4908 price as of 7-12-10 was $12 per blade and $30 for the set of four. manual is $5 as well
Good Luck

Oct 22, 2009 | Hampton Bay 52 In. Brushed Nickel Romano...

1 Answer

Modelo#23273 how do you mount the blades to the

Sounds like the blades were not made for this fan assembly--I'd take it back for exchange.

Aug 22, 2009 | Hunter Fan Co. 60 In.Brushed Nickel...

1 Answer

Fan removal

first- remove the fan blades, next around the canopy there are three screws. remove these and the canopy will drop down. the fan will be hanging on a semi round ball in the mounting bracket. the circuit board should be accessible above the bracket.

Aug 18, 2007 | Hunter 20531 Vista Brushed Nickel Ceiling...

Not finding what you are looking for?

Open Questions:

See all Minka Acero Brushed Nickel Ceiling Fan Questions

Dryers Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Minka Dryers Experts

The Knight
The Knight

Level 3 Expert

74251 Answers

Joseph Coppeto
Joseph Coppeto

Level 3 Expert

257 Answers


Level 3 Expert

76164 Answers

Are you a Minka Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides