Question about Hitachi 53UDX10B 53" Rear Projection Television

1 Answer

Hitaci 53 rear projection

How do I remove the board to solder the new convergence kit?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

Ohhh boy very carefully, i released the wires from around the holders to give me room and disconnected the ones that didn't stretch enough then removed the screws around the black holder that holds the boards and lifted the board up and unsolded the head sink and then the ic's
check out these liks for pics and better explainantion
sounds like convergance amp ic's see links below
· http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
· http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
· http://www.techlore.com/blog/entry/19694/Sony-Convergence-Repair-My-Sony-TV-has-a-distorted-picture-/
· http://www.hdtvoice.com/voice/index.php?s=

Posted on Jan 04, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where would I purchace these chips that solve convergence problems?


U must have tools like a soldering iron,a roll of solders,a roll of desoldering braid or a desoldering pump and must have basic skills of doing soldering works?Yes,than tries these 2 websites like Tvrepairworld.com,Tvrepairkits.com to buy a whole tv convergence kit belong to ur tv make and model.The complete convergence kit will came with all and the most common components parts are dying and dead on ur tv make and model in the tv convergence board also with the kit is a tutoring DVD disc.Have no tools and never done soldering work before.Tries this repair at ur own term,after u finish could have complication might not solved ur tv convergence picture problems at all or completely.Or the shop will cost like $300-350 for parts and labors.

Jul 18, 2011 | Sony KP-53S65 53" Rear Projection...

1 Answer

Picture out of line Problem with the Panasonic PT-53WX42 53 in. Rear projection. Possible convergence circuit? How do i change it


Picture colors lines R,G,B mis alingments,have colors shadows pictures or 3D pictures look alike?Yes.The tv convergence board is dead,the board require changes 2 STK convergence ICS and some or all of it resistors too.To fix the tv convergence board.U must have tools like a soldering iron,a desoldering pump or a roll of desoldering braids and also can do soldering work?Yes,tries websites like Tvrepairworld.com,Tvrepairkits.com to buy a convergence kit belong to ur tv model and make to repair it ur self.Or the shop will cost u like $300-350 for parts and labors.

Mar 23, 2011 | Panasonic PT-53WX42 53" Rear Projection...

1 Answer

I have a red bow at the bottom of the screen. i assume this is a convergence problem. How do i fix it?


U must have tools like a soldering iron,a desoldering pump or a roll of desoldering braids,a roll of solders,also do u know how to do basic sodering?The tv convergence board must replaced 2 STK convergence ICS and some or all of it resistors too.To fix the tv convergence board to solved the tv convergence picture problems.Yes.Tries websites like Tvrepairworld.com,Tvrepairkits.com to buy a convergence kit to repair it ur self.Or the shop will cost u like $300-350 for parts and labors.

Dec 02, 2010 | Pioneer SD-533HD5 53" Rear Projection HDTV

1 Answer

I have a philips 53" tv were getting dubble words there bent" -- because it falls within my area of expertise.


Then u know how to do pcb soldering?Have soldering iron,desoldering pump or soldering wicks,solders?Ur tv have a problems known as Convergence problems,it dead.The tv convergence board,it require the 2 STK convergence ICS and some or all it resistors be replaced to solved convergence problems.Tries websites like Tvrepairworld.com,Tvrepairkits.com.U can buy a convergence kit relate to ur tv model,than repair it ur self.The shop will cost u $300-350 for parts and labors.

Jun 15, 2010 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Color--particularly red-in rear projection sony 46" is off . can i realign. what tools, equipment needed


Ur convergence are dead.Have soldering iron,solders,solder wicks?U know how to solders?Must replaced 2 STK Convergence ICS,some or all it resistors.Tries Websites Tv repair World.com,Tvrepairkits.com to buy a convergence kit to repair it ur self.The shop will cost u $300-350 for parts and labors.

Apr 01, 2010 | Hitachi 53SDX89B 53" Rear Projection...

1 Answer

Cannot use convergence on remote for Pioneer SD-532HD5Pioneer SD-532HD5Pioneer SD-532HD5Pioneer SD-533HD5 53 in. Rear...


Ur convergence it dead.Must know how to solders.Tries these Websites.Tv Repair World.com,Tvrepairkits.com to buy a convergence kit.

Dec 29, 2009 | Pioneer SD-533HD5 53" Rear Projection HDTV

1 Answer

How do you change out the convergence ICs(stk392-110)


Buy both CD intructions,and convergence kit.Know how to solders?Tries these websites Tv repair World.com Tvrepairkits.com for the convergence kit.

Dec 16, 2009 | Panasonic PT-53WX53 53" Rear Projection...

2 Answers

HD 1080 Series (WD-55809) - Color convergence issue


I don't know of illustrated instructions but I can provide you with the service manual for your TV. It does have illustrations of disassembly and components as well as schematics. Your set very likely needs new convergence IC chips. This is a common problem with all projection TVs. The repair is not expensive ($60-75 in parts)  but does involve unsoldering and removing the old chips and soldering in new ones. Some times there are some fuses that need to be replaced as well. If you want the manual provide me with an email address.

Dec 04, 2009 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Color is red picture is blurred


Ur convergence it dead.Know how to solders?Buy a convergence kit,replaced,use what in that kit.Tries these websites.Tv repair World.com,Tv repair kits.

Oct 04, 2009 | Sony KP-53HS30 53" Rear Projection...

1 Answer

53 Hitachi Rear Projection TV with shadows and double images


Does the magic focus work on your set ?

If it doesn't you must replace the convergence Ic's with a kit that is available through your local parts distributor

You must replace all resistors in the kit
If you are not good at soldering and de- soldering have a local tv shop do it for you

Good luck

Jan 25, 2009 | Hitachi 53UDX10B 53" Rear Projection...

Not finding what you are looking for?
Hitachi 53UDX10B 53" Rear Projection Television Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2334 Answers

The Knight
The Knight

Level 3 Expert

75157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...