Question about Samsung SyncMaster 720N Monitor

1 Answer

Probably not only because I found several forums and the same claim as is my case .. initially function to adjust the brightness automatically .. 100% ... like I keep the button pressed continuously .. then we all pressed the menu button but turn awry, return all the function of brightness and .. was stuck in the middle of my screen is 100% adjustment of brightness and the buttons all you would do does not work. I flashed a date from the LED screen as it would make contact but is blocked .. I do not know if there are any commands or reset according to another solution.If anyone knows how I could solve the problem please help me .. Thanks

Posted by on

  • 7 more comments 
  • c0smina_u Oct 05, 2009

    So .. I reinstalled the driver and I looked over the user manual but .. after reinstalling the driver (plus restart PC) the function of brightness is all on the screen and the buttons are all blocked. nor even to close the screen I feel like crazy .. May you know another solution?

  • c0smina_u Oct 05, 2009

    So .. I reinstalled the driver and I looked over the user manual but .. after reinstalling the driver (plus restart PC) the function of brightness is all on the screen and the buttons are all blocked. nor even to close the screen I feel like crazy .. May you know another solution?

  • c0smina_u Oct 05, 2009

    So .. I reinstalled the driver and I looked over the user manual but .. after reinstalling the driver (plus restart PC) the function of brightness is all on the screen and the buttons are all blocked. nor even to close the screen I feel like crazy .. May you know another solution?

  • c0smina_u Oct 05, 2009

    So .. I reinstalled the driver and I looked over the user manual but .. after reinstalling the driver (plus restart PC) the function of brightness is all on the screen and the buttons are all blocked. nor even to close the screen I feel like crazy .. May you know another solution?

  • c0smina_u Oct 05, 2009

    So .. I reinstalled the driver and I looked over the user manual but .. after reinstalling the driver (plus restart PC) the function of brightness is all on the screen and the buttons are all blocked. nor even to close the screen I feel like crazy .. May you know another solution?

  • c0smina_u Oct 05, 2009

    Windows that I use is Windows XP SP3 .. and the maximum resolution is 1280x1024 how about refresh rate to show I do not know how to check ..
    And now the other comment sorry that appeared five times, just do not know why. was not on purpose ..

  • c0smina_u Oct 05, 2009

    i have watched on my LCD properties and it's shows me 60 MHz .

  • c0smina_u Oct 05, 2009

    I solved the problem!!! trivial .. but surely .. I think reinstalling the driver made possible the miracle:)) I play with the resolution .. small, large

    In the end I kept the brightness button hard. I could go and the menu button. solving the problem. thanks a lot for everything you did for me take care of you and thank you once again!!

  • c0smina_u Oct 05, 2009

    Ps: sorry if I wrote wrong sometimes but I am not of American origin .. I am from Romania:)

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 403 Answers

Check out this link below for a PDF manual for your monitor. You can also update your drivers. There is a support here also. Just copy and paste into your browser.

http://www.samsung.com/us/support/detail/supportPrdDetail.do?menu=SP01&prd_ia_cd=05020100&prd_mdl_cd=&prd_mdl_name=720N

Hope this helps. Let me know if I can help you with anything else.
JimmyC

Posted on Oct 04, 2009

Testimonial: "Thank you very much!"

  • 1 more comment 
  • James Chavez Oct 05, 2009

    Let me know the resolution and refresh rate set on your PC for the monitor to display. Let me know the Operating system you are using. Is it Windows 98/Me/2000/XP or Vista?

  • James Chavez Oct 05, 2009

    If you would do this for me. Send me a detailed report with the message information I just sent you and we will get this taken care of for you. Thanks.

  • James Chavez Oct 05, 2009

    Go to this link again. On the far right there is a tab for live chat. A support person will come on and walk you through step by step what we need to do next. Just copy and paste into your browser.

    http://www.samsung.com/us/support/detail...

    Let me know how this works for you.
    JimmyC


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Samsung 55in curved TV. It has auto dimming. In the evening with the lights out it dims to where it is difficult to see the picture. Can I get rid of the auto dimming?


If the brightness on your TV changes automatically (randomly dims and brightens), you may need to adjust the:
  • Eco Sensor function.
  • - And / Or -
    • Energy Saving function.
    The Eco Sensor and Energy Saving functions adjust the brightness of the TV to reduce power consumption.
    • When you set the Energy Saving function to Auto, the TV changes its brightness automatically depending on what you are watching on the TV.
    • When you set the Eco Sensor to On, the TV changes its brightness automatically depending on the brightness of the room.

Oct 18, 2015 | Samsung Televison & Video

2 Answers

Function key and esc are not working


Maybe your screen is already set to the brightest it can be. Does trying to make the screen dimmer work ? (on my HP laptop f3 increases the brightness, f2 decreases it. But perhaps the actual brightness is not really the problem, there are other settings to adjust the visibility of your screen, for example contrast. I don't know how these can be altered on your model, how you do this is probably different to how it is done on my laptop. If you still experience problems, seek solutions by searching the internet, or one of the many computer forums, especially for you the HP community forum accessible through the hp website, www.hp.com


5.May.2014

May 05, 2014 | HEWLETT-PACKARD HP EliteBook Notebook

1 Answer

How to set the time on dmr eh59


Automatic clock setting is done if you initially accept to use the guide plus system (should do). Only if for some reason it does not work, you can set the clock manually following these steps Clock Usually, the unit's setup function automatically adjusts the
clock to correct time. Under some reception conditions, however,
the unit cannot set the clock automatically.
In this case, follow the operation steps below to manually set the clock.
1 Press [3, 4] to select "Off" of "Automatic" and press
[OK].
2 Press [2, 1] to select the item you want to change.
The items change as follows:
Hour,Minute,Second,Day,Month.Year

3 Press [3, 4] to change the setting.
You can also use the numbered buttons for setting.
4 Press [OK] when you have finished the settings.
The clock starts.
If a TV station transmits a time setting signal, and when
"Automatic" in the Clock setting menu is set to "On", the automatic
time correction function checks the time and if necessary it is
adjusted several times every day.








Sep 25, 2012 | Panasonic DMR-EH59 250GB Multi Zone Region...

3 Answers

The brightness of my laptop is very high


There should be a function key (usually labeled "FN") on the keyboard. There will probably also be buttons with brightness adjustment labels on them. Usually the arrow up/down keys adjust your brightness while the FN key is pressed. The adjustment keys are usually labeled with a picture of the sun with an up or down arrow beside it - almost always in a different color than the letters on your keys [maybe light blue?]. Otherwise you may have to adjust it via software in the control panel. Good luck.

Apr 05, 2011 | Computers & Internet

2 Answers

Hello, how can I adjust my screen brightness????


Most laptops have several buttons on the keyboard that can adjust the screen brightness.
1. Find the "Function" key on your keyboard and hold it down. 2. Find the brightness up and down buttons on your keyboard. In this picture, they are on the F7 and F8 key. 3. While holding down the function button, press the key that has the "brightness up" picture on it, similar to the icon on the F8 key in the picture. . bradisright.jpg

Mar 08, 2011 | Computers & Internet

1 Answer

Display to dark how to adjust.


in most cases there is a function key combination on your keyboard for adjusting the monitor brightness. look for the function key (f) and another key with a "*+-" and press them at the same time to increase or decrease the brightness.

also in your advanced display property settings in the control panel there is a driver level brightness and gamma adjustment that can be used.

Apr 01, 2010 | Acer Aspire One PC Notebook

1 Answer

My maytag oven won't light what do I need to do?


When the bake igniter becomes weak or burns out, your oven will not bake. The bake igniter is usually mounted on the oven burner. It's about 1 inch by 4-8 inches (depending on the model), and comes in round or flat styles. If you don't see the igniter glow at all, it's probably burned out. Replace the igniter if found defective. Note: one of the exceptions could be that your oven is set to automatic mode instead of manual. If this is the case, set your oven to manual mode and check again.

If the bake igniter glows red and not bright yellow or white, it is probably because it is too weak. When this happens, the safety valve would not let the gas out into the oven burner. A weak igniter must be replaced.

A faulty igniter is probably the most common cause, however there are others:

-- defective thermostat
-- defective selector switch
-- defective gas safety valve
-- defective gas valve coils


NOTE_ If the ignitor did not appear to function and it is the spark type, it may be out of adjustment which generally requires professional service or it may require replacement.

Jan 09, 2010 | Ovens

2 Answers

What is "OPC"? It comes up and goes away.


OPC_ Optical Picture Control
Automatically adjust the brightness of the screen.
You can change the settings in the menu option.
It's in Menu, then picture, then OPC.

OFF- The brightness is fixed at the value set in "Backlight"

ON- Automatically adjusts

ON: DISPLAY- Displays the OPC effect on the screen while adjusting the brightness of the screen.

If you don't want the silly display from popping up all the time, go into to menu and change the setting to ON; instead of ON: DISPLAY

Apr 20, 2009 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

On the side of the monitor are 6 little buttons. What is the function of each of these buttons.


I found a user guide for a CMV938A that I expect the buttons to be the same.

Here is a link to the manual: CMV938A User Guide

The buttons are described on page 6 of the manual.

1.
Power On/Off button and indicator LED.
Green: Normal.
Orange: Power Saving.
Off: Power Off.

2.
Enter and exit the OSD menu.

3. O/>
•* Quick brightness adjustment and increase contrast/brightness.
•* Move selection right when OSD is displayed.

4. O/<
•* Quick contrast adjustment and decrease contrast/brightness.
•* Move selection left when OSD is displayed.

5 Auto/▼
• *Automatically optimize positions, phase, and clock when OSD is not displayed.
• *Move selection down when OSD is displayed.

6 Turbo/▲ •
*Switch between picture, text and economy modes.
• *Move selection up when OSD is displayed.

Nov 05, 2008 | Computers & Internet

1 Answer

Iriver h10


This is straight out of p. 67 of the user's manaul, available on iRiver website (it may not work if the computer does not recognize the device):

Initializing H10
67
Additional information
Firmware upgrade
66
What is firmware ?
It is the operating system that works in the H10.
iriver provides you with the latest and best features through Firmware upgrade.
You can choose manual or automatic upgrade function.
For information on automatic upgrade, refer to the iriver plus instruction manual.
Manual firmware upgrade
1
Select [Option - Firmware Upgrade] from the menu in iriver plus.
Do not disconnect H10 during firmware upgrade.
Internet must be connected for the "Firmware Update" function.
Change to "Player must be connected to the PC for Firmware Upgrade function.
Note
Please initialize H10 player in the following cases.
All music, pictures, text, and data will be erased from the player during this initialization.
- if there appears to be corruption on the internal hard drive.
- if an error message displays and the player doesn't boot properly.
1 Connect the player and PC using the cable supplied with the player.
Open iriver plus.
Select [Option-Portable Device Initialization]. 2
3
Click [Start] to begin initializing.
Initializing H10
A
A
B
B

May 30, 2008 | iRiver H10 MP3 Player

Not finding what you are looking for?
Samsung SyncMaster 720N Monitor Logo

1,135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Computers & Internet Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

kakima

Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Samsung Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...