Question about Konica Minolta Office Equipment & Supplies

3 Answers

I HAVE A KONICA 7145 COPIER ANND HAVE THE E-56-1 COPIAR

I HAVE A 7145 KONICA COPIER, AND HAVE A ERROR CODE E-56-1. HOW CAN I RESET THE CODE? OR WHAT IS THE PROBLEM? I TRIED TO CONECCT THE FINISHER BUT WUEN I H CONECTED, THE ERROR CODE E-56-1 APPEARS

Posted by on

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Konica Minolta Expert
  • 158 Answers

This code means the system control board and the main control board are not communicating with each other. the new main boards have modified to prevent this code. to reset the code turn the main switch on the left side of the machine off for about 10 seconds then back on

Posted on Oct 15, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Www.fixya.com/.../t3102270-konica_7145_copier_annd_e_56_1_copiar

Posted on Apr 27, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have 7145 and the code E-56-1 appears.
I conecct two new boards and the error code E-56 appears.cant some help me .

Posted on Apr 29, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove minolta 7135 code E 56-1


replace the image control board, all check all connection to printed circuit board remove each connector seperately and check for a bent pin

Oct 11, 2016 | Konica Minolta Office Equipment & Supplies

1 Answer

Where is the hard drive


check the following link, maybe it will help you:
http://diagramasde.com/diagramas/otros/7145-7222-7228-7235SM.pdf
Usually, the hard disks are located where all the boards are, due to the fact that hdd needs to be connected with this boards and if the wires are longer, interferences might appear.
If you need anything else, just drop us an email at office@bizhubreset.com
Also, please visit our websites, we're sure you'll find useful things there
---------------------------------------------------------------
Konica Minolta Error Codes & Solutions - http://www.kmcodes.com
Drum, Transfer Belt and Fusing Unit Firmware Reset - http://www.bizhubreset.com
Drum and Toner Chip Reset - http://www.chipreset.eu
Transfer Belt and Fusing Unit Reset Kit - http://www.resetkit.eu

Aug 11, 2014 | Konica Minolta Bizhub 7145 Copier

1 Answer

Konica 7145


fuser code hot part replace it

Apr 13, 2014 | Konica Minolta Konica 7145 Minolta Bizhub...

1 Answer

Konica 7145 error code F34-2


do this once code comes back replace the fuser continue reset couls cause fire ruining a perfectly good day


To reset failure codes, perform the following:
1. Enter the 25 mode (turn the machine ON, while pressing the 2 and 5 keys).
2. Select [1. software SW settings].
3. Using the arrows on the left of the touchscreen scroll to DIP SW 3.
4. Using the middle arrows scroll to BIT 1.
5. On the touchscreen select OFF (0).
6. Power the copier OFF/ON.

Dec 30, 2013 | Konica Minolta Office Equipment & Supplies

1 Answer

I just ask my copier to try to enlarge past 200%, had really little type on the original. It says "call service" code F-35-1. I work from home and need help to clear out this message. Please...


Fuser error, here is the reset procedure.

Set SW2 (sub power switch) OFF and then back ON, after set to "0" the bit 1 in DIP SW3 in 25 mode. (If you switch power back on without releasing the latch, the error will recur.).

Hope helps.

Sep 02, 2011 | Konica Minolta Office Equipment & Supplies

1 Answer

I have a Konica 7145. It has error code


This is a fixing unit over temperature fault. The device has detcted the fixing unit has gone over 470 degrees F.

You will need to check the Thermisters in the fixing unit, and repair or replace as needed.
Service mode DIP Switch needs to be reset after repairing.


WARNING
• When F34-∗∗, F35-∗∗ or F36-∗∗ (fixing temperature related abnormality) occurs, be sure to repair a defective part before setting the 25 DIPSW 3-1 to 0.
If the 25 DIPSW 3-1 is set to 0 without repairing a defective part, it may cause a fire.

Apr 26, 2010 | Canon imageRUNNER C3200 Copier

1 Answer

Eror code 82-2 konica minolta 7145


eror code f_26_1 konica minolta 7145

Feb 23, 2009 | Canon imageRUNNER 400S Copier

1 Answer

Konica 7145 F-51-2 Error


Code F51-2 at start-up.
Description:
Code F51-2 at start-up.
Solution:
CAUSE: Code F51-2 may be caused by a failed M11 fixing motor. To determine whether or not the motor has failed, use this procedure:
1. Enter the 47 mode (I/O check mode).
2. Input "40".
3. Input multicode "0". If the M11 motor turns, it is good; if it does not turn, the motor has failed.

SOLUTION: Replace the M11 motor (p/n 56AA80072 for 7222/7228/7235 and p/n 56GA73430 for 7145) if it has failed.

hope that help!!!

Oct 29, 2008 | Office Equipment & Supplies

1 Answer

Konica 7145 Fuser Error F34-2


You could go into service mode and reset error count normally to get into the service mode is the following depending on age of machine.

Thanks Jason

A. Procedure
1. Press the Utility/Counter key.
2. Touch [Details] on Meter Count display.
3. Press the following keys in this order.
Stop → 0 → 0 → Stop → 0 → 1

Aug 16, 2008 | Office Equipment & Supplies

1 Answer

Minolta Konica 7145 error code 26-3


NOT SURE BUT YOU CAN GET SERVICE MANUAL WITH ERROR CODES DEFINITIONS www.precisionroller.com type in your model

Jan 12, 2008 | Canon imageRUNNER 400S Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

1,138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

Ben
Ben

Level 2 Expert

108 Answers

David Burkhart
David Burkhart

Level 2 Expert

210 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...