Question about GE Profile Harmony DPGT750GC Gas Dryer

1 Answer

My dryer isn't drying my clothes. the air in the dryer is just warm.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GE Master
  • 7,482 Answers

Sounds like your problem is a faulty heating element or thermostats.
If you remove the back of the dryer, look for the air tube from the blower to the drum, normally inside of the air tube you will find the heating coil and the thermostats...
Good luck,
I hope this help you

Posted on Oct 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore Gas Dryer does not dry clothes.


If this is the electric version then after 15 years you probably need a new heating element, they are not difficult to install and are not terribly expensive as a DIY project.

Jan 12, 2013 | Dryers

1 Answer

Electric dryer heats up and blows air but doesnt dry my clothes


I would check to see that the lint/filter isn't completely clogged up. This could make the dryer warm without allowing it to do its job of drying the clothes.
Also, is the drum spinning? If not, it could be indicative of other problems.

Nov 13, 2012 | Dryers

1 Answer

Clothes remain wet after multiple times through drying cycle; the "AF" warning lamp is on as well.


AF= Air Flow: there is a restriction; check to make sure that the lint screen is clean,and that the door seal is in place and the vent isn't obstructed, just disconnect the vent and run the dryer, if it clears its the vent tube if not feel the back of the dryer with it running should feel hot/warm air continuous, if not feeling a lot of air, the you will need to take the dryer apart and clean all the lint off. if all checks out good then the control board. Hope this helps Tim

May 22, 2011 | Whirlpool Cabrio 7.0 Cu. Ft. Super...

1 Answer

NOT DRYER CLOTHS LIKE IT USE TO TAKING MUCH LONGER


Check for clogs in the vent air line. If dryer lint or some obstruction is slowing the air flow it will take longer to dry clothes. Also the dryer may not be getting hot enough. Check to see if the clothes feel hot or warm when you reach inside. If it feels hot enough it is likely an issue with air flow. heat and air flow are required to dry clothes.

Oct 02, 2010 | Frigidaire Electric Dryer

1 Answer

Dryer doesn't heat properly. There is warm air, but it takes two cycles to dry clothes


If your dryer gets warm but your clothes are taking longer than usual to dry, then the cause is most likely the Lint filter that is clogged thus blocking the moist air to escape: remove all the 'fluff' that is stuck to the filter.
In all cases, make sure that the hot air is exhausted outside the room where your dryer reside.
Hope the information is useful: let me know how you go.

Sep 24, 2010 | KitchenAid Dryers

1 Answer

Have a whirlpool cabrio gas dryer. It takes several hours to dry one load of clothes. The clothes seem to stay damp towels may take all day... what could be the problem


Have you opened the door while its running to see if its warm inside (heater working) If its getting warm and still not drying the clothes properly you likley have a air circulation concern. With the unit running check the exhaust vent outside from dryer it should have a good flow of warm air, if not you have a restriction sowher between the unit and outside. Heat alone will take forever to dry clothing,you need good air circulation to remove the moisture from the clothes otherwise all you will end up with is warm moist clothing.This generaly happens over a long period of time and then all of a sudden you realize the dryer is not working like it use to..Hope this helps you with your concern.....

Aug 09, 2010 | Whirlpool Dryers

1 Answer

HDV6UK...clothes are warm but not drying!! help


Vent going away from the dryer is stopped up full of lint or the vent tubing is collapsed causing the hot wet air to remain in your dryer.

Nov 19, 2009 | Hoover Dryers

1 Answer

Dryer works but doesn't get clothes dry. They're


Sounds like inadequate air flow through the machine. In order for the any dryer to function air is forced through the machine and outside. If the discharge is blocked or obstructed in any way the moist air will not be removed, and the clothes will not dry.

Disconnect dryer from wall and clean the wall outlet and and dryer discharge pipe.

Also, if you are trying to force air higher than 6 feet up the wall from a basement you will need a booster fan on the piping.

Sep 15, 2009 | Whirlpool LGR5636L Gas Dryer

1 Answer

Model DLE7177RM, takes about 3 hours to dry a load of clothes. Dryer is NOT overloaded.


Does the dryer heat up or is it just cool air drying the clothes ? If it does actually dry the clothes eventually then it sounds like it is heating up. First thing to check would be exhaust hose. Is warm air blowing out of it ? If warm you got heat. If cool then your heating element isn't working. It should be fairly strong current of very warm air. If weak but warm, then somewhere between lint filter and end of hose you have a blockage caused by lint buildup or hose is bent and blocking air flow. Check hose first. You can disassemble lint trap and go beyond the lint screen into metal duct within dryer and clean with a long brush and vacuum. You can also disconnect exhaust duct flexible hose at back of dryer and work through metal duct from that end too. If you notice increased air flow then it should solve problem,

Aug 05, 2009 | LG Dryers

1 Answer

Dryer does not get hot enough to dry clothes Roper REX4634KQ1 Electric Dryer


The vent may be stopped up, or the vent hose crimped so the air cannot escape, you can check the air flow at the vent on the outside of the house while the dryer is running.
try cleaning the vent and the lint screen with a vacuum cleaner, you may need to replace the vent hose, this should solve the problem

Jun 02, 2009 | Roper REX4634KQ Electric Dryer

Not finding what you are looking for?
GE Profile Harmony DPGT750GC Gas Dryer Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Cindy Wells

Level 3 Expert

5060 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...