Question about Sony KP-41T65 41" Rear Projection Television

Open Question

When i switch on the tv the picutre is blury and after some time the picutre quality again started normal. but still wecan see the words and digits clealry like the channel no's or if you r watching the cricket match thescores cant be seen. the green color is dominant

Posted by on

  • gold_leaf1 Oct 04, 2009

    whati should do? keeping in view the problem should i know that due to what reason it did happen and where is the exact problem area lies. whatis the intensity of the problem and how it could be resolved. waht should i say to the mechanic to avoid the dodging tactics of the mechanic



×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Sony KF-50WE610

the color drive is going bad check with the sony service center it might be cover and repaired free.  my set went blue and the service tech is checking if it is covered.  good luck.

Posted on Oct 11, 2007

  • 59 Answers

SOURCE: SONY 57' HDTV color projection TV, red color dominance on-screen

these tv's have a problem with bad crt's you could try to replace the red but a better choice would be all three

Posted on Oct 31, 2007

SOURCE: Sony 65 Inch Projection TV Color Red Green Separation

Same problem here. Nothing but problems with Sony. I will never buy another.

Posted on Feb 25, 2008

  • 60 Answers

SOURCE: Our tv is blury, double vision with whites going


This is a very common failure on Projection TV sets.

  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
You can see some example photos and find a solution here...
http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Posted on Nov 28, 2009

welcomejee
  • 10594 Answers

SOURCE: I have a KP65Wv700 Sony Tv it turns red after a

I'm afraid, its RED Picture tube problem that will be replaced.
It is qualified tech job to replace picture tube in rear projection TV because there are few adjustments required after replacement.
Please call local tech for fix tv.
Thanks.

Posted on Dec 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The words "Digital Noise Filter


The words "Digital Noise Filter Off" and "digital Noise Filter On" appear on the top left and right and side of the screen and the words " Auto Visulisation" appear on the bottom of the screen all the time when watching normal T.V.(series 5 lcd) and if we make changes regarding in setting in picture option in mode.then after 20-30 min againg it displays same message

Feb 01, 2011 | Samsung LE40R74BDX 40 in. LCD Television

1 Answer

Its my boyfriends camera but he says its not working at this time. Now when I switch it on the screen comes on but then it switches off a few seconds afterwards? The screen works but just brings up the...


This normally means the batteries are all but flat. Try a recharge or a new set of quality AA alkalines before looking for any other solution. High capacity NiMH rechargeables are the best battery, but they won't recharge forever.

Oct 22, 2010 | Canon PowerShot A510 Digital Camera

1 Answer

My canon a470 produces a blury image after taking the shot.


hi,
you must have a lance problem,so please contact any authorised person for repairs , its may be a lance flap is cracked,

Aug 31, 2009 | Canon PowerShot A470 Digital Camera

1 Answer

Red and blue ghosting,


The most likely cause is shorted convergence chips and possibly a few pico fuses.

These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony,Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer2_bing.gif Hitachi,Mitsubishi,Zenith and others.
You can get a convergenece repair kit with instructions from the links below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2
Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

You can see some more examples and find a fix herebb0cf99.png http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Jul 12, 2009 | LG RU-52SZ51D 52" Rear Projection...

1 Answer

The tv seems really dark.57in theatrewide hd toshiba


Go into the tv menu and select the Preferences menu and set your picutre preference from Theater to Normal. The TV is currently in Theater mode, wich is for viewing with no lights on in the room. Switching it to normal lightens the pictue a lot.

May 27, 2009 | Toshiba 57H81 57" Rear Projection...

1 Answer

I have a Mitsubishi WS-55807 and the colors started to separate - you can reset it by turning if off and on again and it goes away but in time returns, starts getting blury then the colors split up - just...


your convergence circuit has started giving trouble .... normal thing after a few years running for projection televisions ...... could be that the convergence IC's are getting too hot (two big IC's on a heast sink bearing an STK number on it) or that you have some loose soldering that needs to be resoldered on them.... worth the check

May 19, 2009 | Mitsubishi WS-55807 TV

1 Answer

Blury ,double vision, and cant brighten up


Solution:

Your TV has a convergence problem. Here are some of the most common symptoms.

Screen looks 3D
One or more colors can't be adjusted when using the convergence menu.
Screen is bowed in or warped.

Here is a quick test....

Using your original remote go-to the tv settings then goto the convergence or magic focus section.

Try to adjust the convergence.

You should be able to move them up, down, left, and right.

If you can't move them in all directions your convergence chips are bad and should be replaced. This is a common problem.

Its a fairly easy fix on the Hitachi sets.

You can get a repair kit that includes all the parts from www.TvRepairKits.com. The kit includes a photo instruction guide, original Sanyo STK chips, convergence resistors, etc.
Everything you need to fix it yourself.

Jan 29, 2009 | Televison & Video

1 Answer

Hi I have HP PSC1610 printer-copier-scanner. 90% of all my printing I do in "FastDraft" Paper Quality. The default is in "Normal" Paper Quality and I have to change the settings each time I print. I would...


When you print from the Microsoft Word and while printing you change the Printer Properties and Print Quality to FastDraft
Everytime you close the window the setting gets reset and again when you start, you have to do the settings.

The Solution you are looking out is
Go to Start >> Control Panel >> Printer and Faxes
There you choose the your Default Printer HP 1610 >> Right Click
and Click Properties
Then you choose Printing Preferences and Make Choose FastDraft

This setting will remain as your default setting now
So whne you have to Print Normal Mode
You need to change the Properties from Microsoft Word.
and it will reset everytime you close MS Word.
Cause your Default setting then is "FastDraft"

I hope this solves your problem
all the best

Jan 02, 2009 | HP PSC 1610 All-In-One InkJet Printer

1 Answer

Shrunk picture?????


enter the service menu mode and adjust the v.line adjustments

Aug 27, 2008 | Sampo SME-34WHD5 34" TV

Not finding what you are looking for?
Sony KP-41T65 41" Rear Projection Television Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

73591 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...