Question about iiyama AX3815U 15" LCD Monitor

1 Answer

Iiyama vision master pro 450. Faulty auto switching??

Hi,
My above monitor has been acting up recently so that when I switch the pc on the monitor auto switch comes on the dies midway through the process!
If I unplug the power then fiddle with the fuse etc it repowers! This is not the cable as I tried swopping and same thing happens. I also get the monitor refusing to power up after the pc has been in sleep mode ( Vista ultimate ).
Any ideas? I am think I will need a new monitor? tia.
Stuart.

Posted by on

  • basalt2003 Dec 23, 2007

    Hi,

    Its a 19"cathod monitor not LCD but it sounds like your solution may be a similar issue for this. Not sure its cost effective to get repaired but I should check with iiyama I guess.

    Thanks.

    Stuart.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 238 Answers

Hi,the problem is with the LCD electronics , you will need to get it repaired from the sevice center, when u power up the LCD its heating up something inside which is switching it off .

Posted on Dec 23, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windows 7 doesn't recognize my iiyama Vision Master Pro 450 Monitor, what to do?


My Iiyama Vision Master Pro 450 works with Windows 7 when connected with a VGA video cable that has 5 BNC RGB connectors that attach to the back of the Iiyama monitor. No driver install was needed; Windows 7 shows my Iiyama monitor as a "Generic Non-PnP Monitor" with 1024x768 resolution.

Jan 13, 2011 | iiyama Vision Master Pro 450 Monitor

1 Answer

Iiyama Vision Master Pro 454 (White) 19" CRT Monitor Problem Now! cant find driver download for relisys


If you want a Iiyama driver go to the Iiyama website, follow links for support and downloads.

If you want a Relisys driver, go to the Relisys website and follow links for support and downloads.

Nov 19, 2010 | iiyama Vision Master Pro 454 19" CRT...

2 Answers

19" Iiyama HM903DT A Vision Master Pro 454 not detected


Try downloading and installing drivers.

I found some here:

http://www.howtodrivers.com/model38655.html

Nov 10, 2009 | iiyama Vision Master Pro 454 19" CRT...

2 Answers

Connection


Hi...there,
Try Red, Green, Blue that is a sequence. settings all to 100% Have a nice day!

Feb 02, 2009 | iiyama Vision Master 404 Monitor

1 Answer

Iiyama HM903DT - Stopped switching on - constant orange standby


The way I solved it…

I received from iiyama a quote for repair: 400€ without VAT, 478 € with VAT, with a 3 month warranty.

So I ordered a HP LP2475W H-IPS LCD monotor from HP, for 656 € VAT & delivery incl. And a 3 year ON SITE warranty. It is superb, and after calibration it largely outperforms what I had before for my photographic use.

Hope this will help…

Jan 17, 2009 | iiyama Vision Master Pro 454 19" CRT...

1 Answer

IIyama Vision Master Pro 454 turns itself off


Hi, have you opened the monitor and looked for solder cracks on the video input connector

Jan 15, 2009 | iiyama Vision Master Pro 450 Monitor

2 Answers

Iiyama Pro 452 clicking sound during start-up


Your CRT Monitor will fail soon. The clicking sound is coming from your CRT's power circuit.

Make plans now to replace it. This problem is known to be a fire hazard in some cases. So, better safe than sorry.

Sorry for the bad news.

Hope this was helpful.

Worldvet

May 21, 2008 | iiyama Vision Master Pro 454 19" CRT...

1 Answer

Iiama vision master pro 511 MA201D - horizontal distortion adiustment


FACTORY MODE:

Turn ON and OFF the Power Switch while pressing the MENU Button. Turn ON the Power Switch again while
pressing the – Button and you are in the Factory Mode. The following menu appears on the screen when you
press the MENU Button. Turn OFF the Power Switch to exit

Dec 14, 2007 | iiyama Vision Master Pro 510 22" CRT...

1 Answer

Iiyama HM903DTA 19" Vision Master 454


I would suspect it needs to have electronic troubleshooting done in the power supply section to find and replace the defective components.

Jan 05, 2007 | iiyama Vision Master Pro 454 19" CRT...

Not finding what you are looking for?
iiyama AX3815U 15" LCD Monitor Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top iiyama Computers & Internet Experts

William Miller
William Miller

Level 3 Expert

9098 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

RS Technology...
RS Technology...

Level 2 Expert

105 Answers

Are you an iiyama Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...