Question about SVA-USA HD4208TIIIBU 42 in. HD-Ready Plasma Television

1 Answer

TV won't come on

When i push the power button on the remote the indicator light flashes then i hear a clicking sound and the TV will not come on!!


Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

The power board is gone. I have one and it did the same thing. I found a site with the board for about $149.00 but it was not worth it. The brand new board only lasted 30 days and it burnt out also. It seems that power supply board which is a different board and smaller board probably is bad as well and it burned up the new main power board I put in. This TV is not worth fixing. Sorry, it really sucks. Samsung supplies this board to SVA but the board is actually built by Gateway. Deal with this for the past 2 years and no one will take responsibility for it. Dead end with every effort. There were a group of us that was actually trying to file a class action class suit against SVA who is really not willing to help anyone but even that is not worth it. They could replace the board but the new one will burn out shortly after once it has already burnt the first board. Just a badly built TV. I am in the process of purchasing a new tv and I will never buy a Samsung product again becuase of this even though gateway built it for them. Sony or Sharp is my next option.

Good luck to you.

Posted on Oct 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Zenith D60WLCD, I have replaced the lamp and it still will not power up. I there something I need to reset.


You need to reset the lamp counter if it reaches 16,000 hours. The tv will not turn on once this limit is reached. With the tv remote, and the tv off, push the ? Button on the remote, then 9876, then push the enter button. The three lights on the front panel will flash indicating the counter has reset.

Dec 11, 2012 | Zenith D60WLCD Television

1 Answer

Red Light Won't Stay On


1. Remove batteries from remote to "zero" it, then reinsert batteries
2. Turn on TV (RCA?)
3. Press and hold CODE SEARCH button until indicator lights
4. Press and release TV button. Indicator will blink and remain on
5. Enter code from list in instructions
6. Point remote at TV and press on-off button. TV should turn off
7. Use remote to turn TV on again and press CH+. If TV responds you're all set; if not, repeat the process with the next code

Nov 19, 2012 | RCA CRK76TE1 UNIVERSAL REMOTE - With...

1 Answer

My RCA T19060GY TV/VCR will not stay on. When I push the power button on the unit itself (I don't have the remote.), the green indicator light comes on for two seconds and I hear to click sounds


the clicking sound is due to the relay is getting turn on but doesn't stay because of bad component in the power supply board or in the main board. you must check first the bridge type diode and FET transistor using an analog or digital tester.

Aug 16, 2012 | RCA Televison & Video

1 Answer

Hitachi 42" ultravision...power light on, hear


Tries pushes the power switch on the remote few times,each times push wait like a 1 mins or 2 mins for the tv Tuner signal board to take it effect.This process should get ur tv picture back,because the tv Tuner signal board it is old and having problems,evenually require replacement of a refurbish tv Tuner signal board.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish tv Tuner signal board for the replacement.

May 23, 2011 | Hitachi UltraVision 42HDS52 42 in....

2 Answers

I have a Sony Wega KV-34HS420 TV that takes several tries to turn on. When I push the power button or remote power on I hear the normal click and the sound comes on for 3-5 seconds but then I hear a second...


Since the set appears to "recover", it suggests either a poor solder connection or bad cap somewhere in the power supply. The 7 blinks indicate the problem circuit is in the horizontal area. Check the regulator (STRxxxx) IC in the power supply. If you do not have experience working with TVs, please refer this repair to a shop. The regulator IC costs around $25.

Dan

Nov 16, 2009 | Sony FD Trinitron WEGA KV-34HS420 34" TV

1 Answer

My tv won"t turn on.


1. Hold [menu] and [vol-] button on the side of the TV
2. while holding these, press the [power] button on the side of TV (NOT remote)
3. blue light comes ON and stays ON
4. wait 10 seconds then let go of [menu] and [vol-]
5. wait another 30 seconds and some type of picture should appear

I think this is right. I got it from the JVC call centers guys so sorry if I missed or messed up a step.

Apr 07, 2009 | JVC LT-42X579 42 in. LCD TV

1 Answer

TV won't turn on


The set is in protective shutdown because a problem was detected. The 5 blink code indicates that the problem circuit. In this case it is the blanking circuit. Were there any indications of problems prior to the storm? If not, I'll need to lok up this one for the specifics. Do you intend to repair this yourself?

Let me know and I'll provide the details.
Thanks,
Dan

Jul 07, 2008 | Sony FD Trinitron WEGA KV-32FS100 32" TV

1 Answer

RCA systemlink 3 remote


My friend you gotta turn on manually your tv first.Then push and hold until the indicator light lights,then release the code search button now push and release the Tv button after that you gotta push and release the power button until the Tv turns off then you push the enter button to save the code.Good luck.

May 10, 2008 | RCA Universal Remote Control

1 Answer

Tv wont turn on


How many times does the light flash, as there is a code that can give an indication as to what circuit is bad.

Jul 15, 2007 | Sony FD Trinitron WEGA KV-32FS100 32" TV

Not finding what you are looking for?
SVA-USA HD4208TIIIBU 42 in. HD-Ready Plasma Television Logo

358 people viewed this question

Ask a Question

Usually answered in minutes!

Top SVA-USA Televison & Video Experts

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Tony

Level 3 Expert

2600 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Are you a SVA-USA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...