Question about Computers & Internet

3 Answers

Dont remember password to dlink wbr-1310 router and want to add another computer to network. Need to get password, can you help.

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 597 Answers

Lost Password
Please read http://support.dlink.com/faq/view.asp?prod_id=1056 for complete FAQ.

If you forgot your password and/or want to reset the router back to the default settings:

Step 1 Power the unit off by unplugging its power adapter.

Step 2 Insert a paper clip in to the reset pinhole. Press and hold the reset button with light pressure.

Step 3 Power the device back on by plugging it in. Continue to hold the reset button.

Step 4 Watch the lights on the front of the gateway. The M1 & M2 should come on solid. When the M1 & M2 begin to blink slowly, release the reset button.

The unit will reboot itself and should be at factory defaults. If the M1 light is not blinking about once per second, recycle the power on the gateway.

If the M1 & M2 continue to blink rapidly, you held the reset button for too long. Power the device off and repeat the reset procedure.

The default username for our routers is admin. The password is blank. If your router asks only for a password, use admin (lower-case).

Posted on Oct 04, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 557 Answers

Reset modem with pen in the hole on the back and login with the web browser http://192.168.1.1 paswoord wil be again admin and login wil be blank

Posted on Oct 04, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 191 Answers

Router will have to be reset. To do this, you will need to push the reset button on back of router. Disconnect modems and any computer or network devices attached to router. Using a pin, press and hold the reset until lights on front panel go out and come back on. Wait for lights to stop blinking. Unplug the router AC and wait 15 seconds. Plug AC back in and reconnect cables. Router is reset. If router was programmed with a default password, it will be in the documentation or stamped to the bottom or back of router.

Bret
1-2-1ComputerServices

Posted on Oct 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have lost my disk and need to program a password, due to nieghbours using my wireless. How do I do this


Hi evan,

Basically you don't need a CD if you want to change the password or put a password on the network all you need to do is to access the Wireless Settings Page of the Router and put or change the Network Key. To access your router you need a working computer connected to the router then open a Browser then type 192.168.0.1. the Username is admin and the password is blank. Go the the Wireless Settings Page and under Wireless Security Mode you can change the Security Mode to either WEP, WPA or WPA2 then input your desired password.

Rate me if this helps so i can help others.

Thanks for using Fixya.

Feb 04, 2011 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

I want to set a password for my dlink wbr-1310 router put i dont have the set up disk


Go to D-Link - TechSupport FAQ and get the driver.

There a great article at General Router Setup.
If you need more help post back!
Thumbs and testimonial are welcome!

Jan 21, 2011 | D-Link 802.11g Wireless Router WBR-1310...

2 Answers

Lost my password


Press the reset hole on the back of the router in with a pen for at least 30 seconds. This will reset your router to factory settings

Dec 30, 2010 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

I replaced a d-link adapter for the WBR-1310 d-link router and do not have connectivity to the internet. Is there something I need to do to install it, other than plugging it in to the computer im trying...


Yes, you need to install the driver of the dlink wireless adapter for it to work. and remember after you reinstall the driver make sure you know the settin of your wireless connection.what i am referin to is if you have a secure wireless connection you need to know the Network name and the password also knwon as Network Key

Jul 24, 2010 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

I HAVE A DLINK WBR-1310 ROUTER WHERE DOES THE BLUW


Hi!

You can use any UTP cables. Here is how the connection would look like:

DSL -> DLINK WAN PORT
DLINK PORT 1(or any other ports) <---> COMPUTER

If the router is set to give out IP addresses automatically(DHCP), you should be able to connect flawlessly.

Oct 25, 2009 | D-Link 802.11g Wireless Router WBR-1310...

3 Answers

WBR-1310. No admin logon, only f/w upgrade page


Download firmware from site
http://www.dlink.com/products/?tab=1&pid=WBR-1310&rev=WBR-1310

DLink states the login issue has been fixed with firmware v1.04 3/28/07

Remember to get the right one for your unit model. You must connect a RJ45 cable to the router and computer you have downloaded the firmware to and remember which directory it's in. When it asks for the firmware put in the target location (c:\my documents\xxxxx) of the firmware file. Good luck.

Jul 02, 2009 | D-Link 802.11g Wireless Router WBR-1310...

3 Answers

Lost my set up CD have new computers


setup cds u dont need . . . ok so to get it to work . . . first of all is it for ur house or a work . . . i can only help for ur house . . . and work but idk if u want it for work , . . . anyways
u plug it in and u put a cable to it and plug the cable into a wall . . . . and if u already have a router with a cable . . . just plug the little cord into the dlink and the other side into ur other router . . . . and it should work o-__-o urs hopefully -ELI

Jun 16, 2009 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

D-LINK WBR 1310 ROUTER


Go the router setup page, 192.168.0.1, type admin as the user name and password as the password (default, if you have changed these use your login info).
Then on the wireless page change the SSID (router name).
You can also add a security key on this page.

http://support.dlink.com/emulators/wbr1310_revA/wireless.htm

more info from D-Link:

http://www.dlink.com/products/support.asp?pid=474&pv=96&sec=1

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Apr 12, 2009 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

Dlink WBR 1310 error 109 internal error


Remove the CD setup. Try calling your Dlink Manufacturer to help you install the WBR-1310 manaully.

Jan 03, 2009 | D-Link 802.11g Wireless Router WBR-1310...

3 Answers

I forgot the username of dlink wbr-1310 wireless router


Hi there,

As an initial info try to do a hard reset on the unit, this process will restore the system into a original settings. you can find the reset switch on either on the left of right sight of your router.

or

you may visit this SITE to recover again your current password without erasing or removing the current settings made.

Reset Password.

Hope this idea helps you.

Thank you for using fixya.

Nov 20, 2008 | D-Link 802.11g Wireless Router WBR-1310...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

559 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...