Question about BenQ DC E520 Digital Camera

Open Question

The shutter release button/manual zoom lever broke off when it was bumped accidently against a sharp metal corner. I still have the part. Can this part be refitted? replaced? It appears that very small fastenling points have been damanged. Does BenQ have a repair service? I have more or less resigned myself to buying a new pocket digital camera thinking that repair costs would be prohibitive. But I have found the camera has worked exceptionally well for me and not happy parting with it. Any advice to someone has no experience making such repairs?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: Problem with my digital camera

ope and close the memory card door

Posted on May 05, 2007

Ad
  • 1 Answer

SOURCE: camera turn off

dear top Experts. I have digital camera DC E30 BENQ .I do turn on my camera after seconds turn off.first please help me.secndly for repair my camera I need manual repair. thank you very much

Posted on Apr 10, 2009

SOURCE: lcd on my benq digital camera DC C740i was cracked

Take it to Black's or Henry's. They can replace the cracked part

Posted on Aug 31, 2009

lock123
  • 6831 Answers

SOURCE: At the start of a device BenQ DC E610, after the

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Posted on Sep 27, 2010

lock123
  • 6831 Answers

SOURCE: BenQ DC E610 ERROR SYSTEM0010

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Posted on Sep 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a canon powershot sx 130 is and I can't figure out how to zoom in I tried everything and instead it just keeps taking pictures.


It's near the shutter button where you press to take a photo. It slides each way. If it's broken and you need to have it serviced, this is the place for the Canon's: www.CamerasAndParts.com They are the best if you need a repair for one of the Canon models.

Dec 28, 2014 | Cameras

1 Answer

Is there a timer on this camera?


Yes there is .......page 47 of the manual shows you how .... its an option on the drive mode in the startup menus.

http://safemanuals.com/user-guide-instructions-owner-manual/KONICA%20MINOLTA/DIMAGE%20Z1-_E

Self-timer
Used for self-portraits, the self-timer will delay the release of the shutter for approximately ten seconds after the shutter-release button is pressed. The self-timer is set on section 1 of the recording menus (p. 44).

With the camera on a tripod, compose the picture so the subject is within the focus frames. Press the shutter-release button partway down to lock the exposure and focus (1). Press the shutter-release button all the way down to begin the countdown (2).

Because focus and exposure are determined when the shutter-release button is pressed, do not stand in front of the camera when taking a self-timer image. Always confirm the focus with the focus signals before beginning the countdown
(p. 25).

The self-timer is counted down on the monitor. During the countdown, the self-timer lamp on the front of the camera (3) will start to blink and is accompanied by an audio signal. A few seconds before the exposure, the self-timer lamp will blink rapidly. The lamp will glow steadily just before the shutter fires.

To stop the countdown, slide the zoom lever to the left or right. The self-timer drive mode is reset to single-frame advance after the exposure. The audio signal can be turned off in section 2 of the setup
menu (p. 83).

Mar 03, 2010 | Konica Minolta DiMAGE Z1 Digital Camera

1 Answer

Zoom


Hi there,

There's a lever on the right hand side, surrounding the shutter release button.
Turn it right to zoom out, left to zoom in.

Hope I helped!
Tom


Jun 20, 2009 | Panasonic Lumix DMC-TZ1 Digital Camera

1 Answer

Film Rewind Button Problem!


mistermanage,

turn the advance lever to charge the shutter.or open the film door and rotate the drive sprocket to the right, this will release the button. if the button didn't pop up then the bottom cover will have to be removed in order to release it manually.

Feb 03, 2009 | Vivitar V3800N Zoom 35mm SLR Camera

1 Answer

Sharp Microwave R-1480 Door Release Button want open the door.


What usually breaks is the door open lever. Please unplug the oven first.

At our site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

Then you'll be able to see how the door open button would press against the door open lever, which would then lift up against the door latch heads (hook-like projections on the door) and the door should open.

You can usually find exploded views and order parts by entering your model number at the Sears parts site, but the best place to order Sharp parts is Tritronics. You can also call them at 866-779-5835.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Nov 19, 2008 | Sharp R-1480 Microwave Oven

1 Answer

Broken door latch


What usually breaks is the door open lever.

You'll need to remove the outer cover to see the problem.

Once it is apart, you'll be able to see how the door open button would press against the door open lever, which would then lift up against the door latch heads (hook-like projections on the door) and the door should open.

We have the full service manual and have uploaded it to our site here:
http://www.microwavedisplay.com/dcm_24r_r930ak_aw_sm.pdf

Sharp parts are usually less expensive when ordered from Tritronics at http://www.wehaveparts.com

We're happy to help and we appreciate your thoughtful rating of our answer.

May 30, 2008 | Sharp R-930AK Convection/Microwave Oven

1 Answer

Zoom broke


Solution: Procedure for setting Digital Zoom PowerShot A520

Digital Zoom When the LCD monitor is on, images can be zoomed with the combined optical and digital zoom functions as follows (figures are approximate): 5.7 times, 7.1 times, 8.9 times, 11 times, and 14 times 1. Press the <DISP.> button to turn the LCD monitor on.
2. Turn the shooting mode dial to any Shooting mode except for stitch_assist_icon_a70.gifor movie_icon_a70.gif.
3. In the [ rec_icon.gif(Rec.)] menu, select digital_zoom_icon_a70.gif(Digital Zoom).
digital_zoom_menu.gif 4. Select [On] using the left_arrow.gifor right_arrow.gifbutton and press the <MENU> button.
5. Press the zoom lever toward tele_icon_a70.gifand hold it.
  • The lens will zoom to the maximum optical telephoto setting and stop. Release the lever and press it toward tele_icon_a70.gifagain to further zoom the image digitally.
  • Press the lever toward wide_icon_a70.gifto zoom back out.
digital_zoom_lcd_a70.gif 6. Shoot the image.
  • Shooting procedures are the same as for the auto_mode_icon_a70.gifmode.
caution_a70.gif
  • The digital zoom cannot be used when the LCD monitor is off.
note_icon_a70.gif
  • images become coarser the more they are digitally zoomed.
  • Since camera shake may become a factor when using the digital zoom, the use of a tripod is recommended.
  • Digital Zoom is disabled when the [Postcard Print Mode] is selected as a image quality setting.
IF this fails, your camera is in need of service.


Dec 30, 2007 | Canon PowerShot A520 Digital Camera

1 Answer

VGB3 leg lock broke


On the velbon vgb 3, the leg locks consist of a lever, one or two pieces of metal and a plastic piece. The metal and plastic pieces rest in a depression against the lever. When the lever is pulled out, pressure against the smaller leg section is released. When the lever is pushed in, pressure against the smaller leg section is exerted, locking the legs in place. On the back side of each joint, there is a phillips head screw which acts as a stop to keep the leg section from coming all the way out. When the screw is backed out, the leg section can be removed, exposing the latching mechanism. If the only problem is that the latch mechanism came apart, it can simply be reassembled. If, however, something broke and allowed the latch assemby to come apart, that will have to be dealt with as well. My guess is that the phillips screw may have become loose, and the latch came apart.

Aug 14, 2006 | Velbon Chaser EFL-4 (A) Tripod

1 Answer

Manual Focus


1) Press and Hold the FOCUS button until to you "MF" appear in the lower left corner of the LCD Display on the back of the camera. Then you can release the Focus button. 2) Press and Hold the DISP/i button to see the Manual Focus Range. 3) While holding the DISP/i button, use the Tele/Wide Zoom Key to set the desired Manual Focus. You can see the focus change as you toggle the zoom key. 4) When you are ready, release the DISP/i button and Press the Shutter Button to take your picture. *Press the Focus Button to return to Auto Focus / Macro options

Sep 15, 2005 | Toshiba PDR-M71 Digital Camera

1 Answer

Manual focus


1) Press and Hold the FOCUS button until to you "MF" appear in the lower left corner of the LCD Display on the back of the camera. Then you can release the Focus button. 2) Press and Hold the DISP/i button to see the Manual Focus Range. 3) While holding the DISP/i button, use the Tele/Wide Zoom Key to set the desired Manual Focus. You can see the focus change as you toggle the zoom key. 4) When you are ready, release the DISP/i button and Press the Shutter Button to take your picture. *Press the Focus Button to return to Auto Focus / Macro options

Sep 15, 2005 | Toshiba PDR-M81 Digital Camera

Not finding what you are looking for?
Cameras Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top BenQ Cameras Experts

kakima

Level 3 Expert

102366 Answers

Tony

Level 3 Expert

2600 Answers

Edward Talavera
Edward Talavera

Level 2 Expert

140 Answers

Are you a BenQ Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...