How do I connect my PC - compaq nc 6000 to the TV

Hi Prissy,

You get USB to HDMI/DVI cables with which you can make the connection with your TV to PC

Hope this helps you.

Regards
Nat

hi ,
you can cenect your laptop to samsung plasma TV using VGA cable to your laptop.
After all seting up, by pressing combination fn + F5 or F3 depend your laptop you will conected to samsung plasma tv.
plasma will automatically detect your laptop connection. If not detected, you can choose PC input manually by pressing source on remocon.
thanks.

There should be a setting within the comp. Is it connected to the comp monitor and the tv? Perhaps from the comp to the tv with the monitor from the comp as well? Well if so, you may need a certain setting within the comp. Check under (on xp) display properties, and then under the settings tab. Please rate!

Limited connectivity means your pc not able to connect to the preffered network.................
wi-fi also not working....................

there is a problem with your router not from pc.

Try pressing the "fn" button + find a blue mark with antenna or stg. like it. When you press them toghether you should see the LED on your laptop start blinking or just got lit...

you could plug a video cable into the back of your laptop and turn it back on it should recognize your external monitor

You will have to purchase the discs. You can find them at Compaq's support site. You may be able to find them on Ebay or a local shop cheaper than Compaq.

hi
have a look here see if this helps you How to connect your Laptop/PC/Computer to your TV


riz

normally, laptops have an internall integrated wireless modem. All you should have to do, is enable the wireless, by pressing Function F6 or going into the network connections window and enabling the Wireless form there.

jdawg01,

the signal that receives by ur adapter is not that much strong so it was unable to connect properly..u might have receive a low signal..