Question about Computers & Internet

2 Answers

My Sanyo Dolby Digital Integrated HDTV does not appear to have the connection for the Y cable - (looks like the connection for a monitor on a PC) so I'm dead in the water from the get go. Must the Y cable be used? Is there another way? I need proper instructions as to how to hook up this KW-PCTV 1600...you know, like 1. PC and/or tv should be on or off while connecting. 2. Plug S-video cable into box where it says s-video out. 3. Plug other side of s-video cableinto tv where it says s-video....and so on. This shouldn't be so hard and it appears that there are tons of us who are baffled by the lack of any real instructions as to how to connect this product which I can say for myself I am so anxious to try. Thanks for your help. Paulettd

Posted by on

  • Paulette Brandt
    Paulette Brandt Oct 05, 2009

    I am not trying to hook up my TV to a cable box! I am looking for simple instructions for hooking up my Kworld PCTV 1600!! You know like: 1. Turn off or on your tv and pc while
    hooking up. 2. Attach s cable from Kworld box to s cable input on tv. etc. Diagrams are not good enough! Thanks, Paulette

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,188 Answers

The device you have is a PC to TV converter. It converts the signals from you computer output to display on your TV.

You can use an S-Video cable if you have one.

Plug one end of it into the connector at back of your PCTV.

Plug the other end into your input terminal for S-video on your HDTV.

Now plug one end of the Y cable into the VGA (monitor) out connector of your computer.

And plug the other end of the Y-cable to the connector labeled "VGA input" at back of your PCTV.

Now, plug in the USB power cable: one end (flat one) into your computer's USB, and the other end (round one) into your PCTV "DC in" connector.

Turn on your HDTV and PCTV. Select the S-Video input from the HDTV menu and you should now start receiving display from your computer.

Let me know if you find anything difficult to understand.


Posted on Oct 05, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi Paulettd,

Thanks for using FixYa. Please review the below link for the solution to your problem:

How to Hook-Up HDTV

Please do accept the solution if the issue is resolved or else revert for further assistance.

Thanks
Rylee

Posted on Oct 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sanyo DP26746 takes a few minutes to come on.


It could be many different things. What are you connected to?

Nov 23, 2013 | Sanyo Dp26746 26" 720p Hd Lcd Television...

1 Answer

Need to know how 2 download pictures from x1250 sanyo camera 2 pc


You need to connect the camera with a USB cable to the computer.
Only then the USB connection screen appears on the camera's monitor. There you select computer and press the set button.
The screen to select the connection mode appears
Select "Card Reader" and press the select button.
Now the camera is connected in the card reader mode.
If the windows automatic playback screen appears on the computer monitor, close it.
Double click on the desktop [Mediaimpression 2] icon to launch Mediaimpression 2.
The Mediaimpression 2 home page appears
Click the right top icon [Import]
Then the files in the camera appear on the screen.
From there you can chose the files you want to safe on your computer. You can chose or make folders where you want the files on your computer.

You can read this in the manual click the link
http://www.central-manuals.com/instructions_manual_user_guide_camera/sanyo.php

Oct 28, 2013 | Sanyo Cameras

1 Answer

My Sanyo DP23845 23 In. LCD Television does not have any options under set up beside color-how do I add channels?


HDTV inherently provides a superior sound quality simply because the sound of HDTV is digitally transmitted. The difference in sound between an HDTV television and an analog television is rather noticeable. In fact, it is directly analogous to the difference between the music on CD's compared to the music on audiocassette tapes.

The difference in sound quality provided by HDTV televisions and programming does not end there. Many HDTV programs are also broadcast in Dolby Digital 5.1 surround sound, but in order to take full advantage of this technology, it is necessary to have the right equipment.

Dolby technology has been created by Dolby Laboratories, Inc. This technology is the most renowned provider of digital audio technology. Also, Dolby Laboratories is known for reliable and superior products. For these reasons, Dolby Digital Surround has become the standard for HDTV. Many television manufacturers substitute their own surround sound systems, but they cannot live up to the reputation and performance of Dolby. Therefore, it important to check the specs on an HDTV television before buying in order to ensure that it uses Dolby Digital Surround.

When using Dolby Digital Surround Sound, there are three options for set up. The first option is to buy a television with high quality center channel speakers, woofers, tweeters, and Dolby technology installed in the television. With this option, it is unnecessary to buy addition equipment to take advantage of Dolby Digital Surround Sound.

Another option for taking advantage of the Dolby Digital Surround Sound with an HDTV is to connect an external set of surround speakers to the television. With this option, the surround sound set up includes a front pair of speakers, a surround pair of speakers, a center channel, and a subwoofer. Sometimes, the front speakers are "powered towers." This means these towers include subwoofers.

The placement of these speakers is very important for the quality of the surround sound. The Center Channel Speaker should be centered either above or below the television. The Front Left and Right Speakers should be placed in an arc formation in line with the Center Channel Speaker. The Surround Left and Right Speakers, on the other hand, should be placed to the left and right sides behind the listening position. Many people choose to wall mount these speakers.

The third option for taking advantage of the Dolby Digital Surround System included in an HDTV television is to use an external set of front speakers can be connected to the HDTV television. This configuration is useful if there is not enough room to set up the external surround sound system and the HDTV does not come with Dolby Digital Surround installed. This isn't true surround sound, but it is a viable alternative to those who can't take advantage of the first two formats.

The audio and video outputs of the DVD or VCR can be connected to the AV receiver's video outputs. If a separate DVD and VCR need to be connected, one can be connected to the VCR1 connection and the other can be connected to the VCR2 connection. The AV receiver's VCR video and audio outputs should then be connected to the audio and video inputs of the DVD and/or VCR. In this way, the DVD and/or VCR will be able to record video signals that come through the AV receiver and the VHS tapes and/or DVD's will be able to be viewed on the HDTV.

To take full advantage of the Dolby Digital Surround Sound technology, one of the video outputs of the DVD player and/or VCR needs to be connected to the AV receiver. The digital coaxial audio or digital optical connection must also be connected to the AV receiver.

How do I connect my CD player?

A CD player can be connected to an AV receiver. The CD player's digital audio outputs can be used to connect the CD player to the AV receiver. A CD-Recorder can also be connected the AV receiver by using the Audio Tape Record/Playback input/output loop connections. In this way, the CD-Recorder will be able to function much like a standard audiocassette deck.

What else will I need?

Besides the basic electronic equipment needed to set up Dolby Digital Surround Sound, it is necessary to have connection cables. This includes video, audio, and loudspeaker connection cables. These cables need to be at an appropriate length in order to set the speakers in the proper position for optimal surround sound quality.

Jul 29, 2012 | Sanyo DP23845 23 in. LCD Television

1 Answer

How can i use dvi port


DVI stands for (D)igital (V)ideo (I)nterface.

DVI is a new form of video interface technology made to maximize the quality of flat panel LCD monitors and high-end video graphics cards. It is a replacement for the P&D Plug & Display standard.

you can connect high definition monitor , LCD projector , LCD T.V to a DVI port

There three kind of DVI connector
1. DVI-D (Digital)
2. DVI-A (Analog)
3. DVI-I (Integrated Digital/Analog)

DVI-D format is used for direct digital connections between source video (namely, video cards) and digital LCD (or rare CRD) monitors

DVI-A - High-Res Analog
DVI-A format is used to carry a DVI signal to an analog display, such as a CRD monitor or and HDTV

DVI-I - The Best of Both Worlds
DVI-I format is an integrated cable which is capable of transmitting either a digital-to-digital signal or an analog-to-analog signal, but it will not work transmitting a digital-to-analog or analog-to-digital signal.


How to Recognize These three types of DVI Cable
There are two variables in every DVI connector cable, and each represents one characteristic.

The flat pin on one side denotes whether the cable is digital or analog:
A flat pin with four surrounding pins is either DVI-I or DVI-A
A flat pin alone denotes DVI-D

The pinsets vary depending on whether or not the cable is single- or dual-link:
A solid 27-pin set (rows of 8) for a dual- link cable
Two separated 9-pin sets (rows of 6) for a single-link cable

Jul 12, 2011 | Computers & Internet

2 Answers

We hooked it up and have no sound


From the Console Settings screen in the System area of the Xbox Dashboard, you can configure the video output of your Xbox 360 console for a widescreen, high-definition TV, determine your audio options, and check your console's serial number and Xbox Dashboard version.
Go to correct section for ... Audio

Change your audio output settings for games from this screen. These audio settings do not affect DVD movie playback. For DVD audio settings, refer to an individual DVD movie's setup screen.

Settings consist of:

  • Analog Output Settings: choose Mono to merge the left and right audio signals so that you can hear all sound through a connection to a monaural TV or monitor; choose Dolby Pro Logic II to listen in normal stereo (no audio surround receiver required) or to listen to Dolby Pro Logic or Dolby Pro Logic II soundtracks from compatible games or other media.

    Dolby Pro Logic consists of four channels of audio: front left/center/right and a monaural surround channel that is mirrored in each of your rear left/right speakers. Dolby Pro Logic II uses digital signal processing to generate 5.0 audio (front left/center/right, rear left/right) from any stereo (left/right) programming, whether from movies, music, or games. Unlike movies and music, however, games are specially encoded with Dolby Pro Logic II decoding in mind.

    To listen in either Dolby Pro Logic or Dolby Pro Logic II surround sound, you must connect your cable's left/right (white/red) RCA connectors to a compatible surround receiver. For more information, see our connection page for the cable you're using:
  • Digital Output Settings: configure this setting only if you'll be using the Toslink optical digital-audio output from a compatible Xbox 360 AV cable (optical digital-audio cable sold separately):


    The default digital-audio setting is Dolby Digital 5.1. If this is your preference, you do not have to make a selection from this screen.

May 13, 2011 | Microsoft Xbox 360 Console

1 Answer

Got a Kenwood vr405 surround receiver, a Sanyo plasma TV, hd cable box and an insignia blu ray player. Both the cable box and the blu ray player are connected via hdmi to the TV and the TV is connected to...


If you would like to use high definition audio decoding, connect the HDMI from the blu ray player to the receiver. If that it not an option for you due to lack of equipment such as an additional HDMI cable to go from the receiver to the television for the video portion of the signal, then connect your optical cable again. After the optical cable is connected, make sure the Dolby Digital decoding is enabled on the receiver, and that the media you are playing also has a version of 5.1 surround sound. Then, enter the setup menu of the player (which I suspect this is actually where the problem might reside in your case) and make sure that Dolby Digital and DTS are not set to "downmix." Dolby Digital should be set to output Dolby Digital and so on and so forth...hope this helped.

Jan 14, 2010 | Kenwood VR-405 Receiver

2 Answers

Low volume on LG HDTV


I encountered the same thing using the HDMI interface on my new TWC cable box (Motorola DCX-3200). After a little bit of research, I finally fixed it by changing the digital audio mode in the cable box using this procedure:

1. Be sure the TV is on and connected to the cable box.
2. Using the cable box remote turn power OFF.
3. Immediately press the MENU key on the remote. The USER SETTINGS menu should appear on the TV screen.
4. Select the ADDITIONAL HDMI SETTINGS >>> menu item.
5. The ADDITIONAL HDMI SETTINGS menu will appear.
6. Scroll to the AUDIO OUTPUT item and select this.
7. Change the setting from AUTO to L-PCM.
8. Return to the main page
9. Using the remote, cycle power OFF.
10. When the cable box is turned on again, you should be good to go.

I realize these instructions are specific to the DCX-3200, but there may be a similar setup option available in your cable box as well.

The problem here is that the cable box is by default configured to use Dolby Digital audio, which requires an additional 10dB of headroom to deal with the boosted LFE channel. If the cable operator hasn't taken pains to set the system up correctly (and most haven't, apparently), the digital audio level sent on the HDMI interface will be approximately 11dB down from normal analog line levels on the HDTV channels. Changing to straight linear PCM sets the TV receiver audio level on the HDTV channels to match the levels on the non-HD channels.

The only problem with this fix is that if you intend to feed a Home Theater receiver that uses Dolby Digital processing with the cable box output you will lose the Dolby encoding feature and be forced into straight 2-channel stereo. For a simple installation like mine where I'm just feeding the TV, this fix works fine. If you have a more complex setup that takes advantage of Dolby Digital features (when it's available in program material), you may have to live with the problem.

For a technical reference on why this happens, see http://www.megahz.com/specimages/Dolby/LM100%20Cable%20App%20Note%2011-05.pdf

Hope this is useful.

May 19, 2009 | LG 37LG30 37 in. LCD HDTV

1 Answer

No 5.1 surround when adding a Philips upconvert player to the San


Sounds like you are getting analog signals from your componet cables and a true digital input from your HDMI into your tv.

However that unit is Analog audio input x 1 only.
So i dont think your going to get true digital surround sound.
The problem being

Sanyo =

Inputs: Analog Audio x 1 Outputs: Composite x 1 · S-Video x 1 · Component x 1 · Digital Audio Coaxial x

Feb 03, 2009 | Sanyo DWM-2500 System

2 Answers

Volume trouble with 37LG30


well if you want to get rid of he tv i offer to buy it from you
Habunoki@yahoo.com

Feb 03, 2009 | LG 37LG30 37 in. LCD HDTV

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...