Question about Intel PENTIUM-4 865GV CHIP MOTHER BOARD (MBP4I65GV) Motherboard

2 Answers

Mother Board connection

How to connect power led ,HDD,Reset,power SW cables in Intel Mother board series D815EEA2

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,351 Answers
Re: Mother Board connection

Go to the site below. Its a manual for the 800/i65GV group. Go to page 67 and zoom in. You'll get a nice look where everything goes. Two rows of pins. Upper row and bottom row. Real close to each other. Do not place connectors up to down. Connect only left to right.
The reset connector has two pins. One will be white or black. These are - grounds. So connect it to the bottom row onto the most right two pins. Moving to your left. Skip one pin. Take the Power Switch a two pin connector. Remember Black & White is ground & ground goes to your right for both rows of Mb pins.
Go to IDE_LED next. Its the last two pins towards your most left of the bottom row of pins. Move to the upper row & the power LED. Same as the bottom row keping the grounds to your right. Lastly is the speaker. Its connector holds four pins but you only use two. One in each end.

Good luck & please vote....

Posted on Dec 22, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 196 Answers
Re: Mother Board connection

The manual is here:

Posted on Dec 22, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Power sw reset sw power led hdd led where is located in the mother board intel e 210882?

Hi Dear

For the installation the new motherboard in you PC, click here and find the guide book for mother board installation.

God luck

Sep 08, 2011 | Intel Motherboard

2 Answers


Here is a few pictures that shows you how to connect your cables:

I am not sure which one it is, but these are the most common ones.

Hope this was helpfull.

Mar 17, 2011 | Intel PENTIUM-4 865GV CHIP MOTHER BOARD...

1 Answer

How to connect power led & reset ledin mother board

firstly u find 9pin jack on motherboard its near about pci slot and their is print power switch,power led and reset switch. some wires are  comnig from your cabinet their is print po sw,reset,hdd,pwd led

Sep 19, 2009 | Advantech 700 Series Intel Pentium ...

1 Answer

How to connect power led ,HDD,Reset,power SW cables in ESYS 865gv/775 Mother board. Thank you

Here is the link to read and find out where you connect power led & etc.:
A tip where you can recognize also in your motherboard.

Rhis is where you will hook in the connections from your case. These are mostly the different lights on your case, such as power on, hard drive activity etc.

Open this browser:

Good luck!

If i am helpful to you, please rate me.
Thank you.


Aug 25, 2009 | Intel PENTIUM-4 865GV CHIP MOTHER BOARD...

1 Answer

Intel Desktop Board D815EEA2 boot problem

Hi and welcome to Fixya!

this means that the BIOS is corrupt ..

Thanks for using FixYa!

Jul 18, 2009 | Intel Desktop Board D815EEA2 Universal...

3 Answers

How to connect Power LED, Power SW, Power Reset and HDD LED

it is written in the motherboard..
re-reset botton
pw- power botton
hdd led- hard disk led
pw LED- power led

the code is pin 1....

Jan 28, 2009 | Zerus Intel Desktop Board D815EEA...

1 Answer


To download you're manual for the D815EEA2, please click the link below.
You need to go to page 85.
7482c11.jpg Starting at Pin 1 (Hard drive LED) is positive + & pin 3 is ground -. Next, Power LED, Pin 2 is + & pin 4 is ground - .
Letter C, is for the reset switch, Pin 5 is + & pin 7 is - .
Power on/off switch, pin 6 is + & pin 8 is - .
The letter I is used for the internal speaker. The positive pin number 16 & ground pin number 10, letter G

Good Luck!
Have more questions? Please feel free to ask.

Jun 02, 2008 | Intel Desktop Board D815EEA2 Motherboard

Not finding what you are looking for?
Intel PENTIUM-4 865GV CHIP MOTHER BOARD (MBP4I65GV) Motherboard Logo

586 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

2598 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Are you an Intel Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides