I had to reconnect wires inside my Remington Limb n' Trim 8. It's all back together but I can't seem to get the bar and chain aligned to work smoothly. Is there a diagram showing the parts as they should be assembled?

you need bar and chain oil you can get it at most hardware stores

Hi, I'm assuming you mean the oil for the chain. If so any brand of bar and chain oil is fine. Hope this helps, regards Phil.

Hi jvaltha,

Here is a website that carries the chain for your EL-1 saw: http://shoppingcart.msservicecompany.com/default.aspx?ext=true&itemid=091374S&size=small The part number is a replacement for the original chain, which Remington must not offer any more.

That same site also carries a chain for your LNT 8 saw, but there are different subcategores, LNT1, LNT2, and 8A and B. I'll paste the address for the page where you have to choose your option: http://www.desaparts.com/remington-chainsaw.html

FYI, You don't need to buy a remington chain to fit your saws. Just buy a chain that is the right length and matches the rest of the specs on your chain, the pitch etc. .050,.025, and so many teeth per inch and so forth. Then you can buy locally.

Hope this helps. If it does, I'd appreciate a 4 thumbs up...keeps me working. Thanks,

Handie Andie

jmccabe2465-

The reservoir is for bar chain oil, which all chain saws require to allow the chain to operate smoothly and reduce heat build-up from friction.

Hope this helps.

Regards,

DIYpro

There is a very in depth explanation in this Remington OM.
http://shoppingcart.msservicecompany.com/msservice_net/product_files/113005-01D/113005-01D_OM.pdf

If you have more questions or need additional help please reply below and I will get back to you. Good Luck. HTH
Lou
Thank You for using FixYa.

I tried the numbers you provided and none crossed.
I went here:
Remington.com
http://www.desaparts.com/index.htm

• Type "YourModelNo" into the "Model #:" window, then click search.
• Click the YourModelNo - Remington Electric Chain Saw "View Model" link.
• Click “View Owners Manual” or "View Illustrated Parts Breakdown" link.

The most complete owners manual is "M15012US (and several others)" viewed as explainewd above. Page 9 discusses oil weights. Standard bar oil is 30 weight non detergent with addatives to help it adhere to the bar. That would be my recommendation. HTH
Lou

Your model is LNT-2 you can find an IPL here:
http://www.desaparts.com/remington-chainsaw.html
I recommend you print it. Click the part number you need. HTH
Lou

Take it back to where you purchased it or contact them by email/phone and explain your problem (have saw in hand). Together you can solve this. We cannot find the model number on your saw from here. GL
Lou

Here's a good place to look!
http://www.desaparts.com/index.htm

Here is a link to the owner's manual you requested... http://12.153.20.74/manuals/107990-01G.pdf. I hope this helps you...