Question about DISH Network IR Remote Control

1 Answer

I have a Dish Network 20.0 IR remote. How do I program it to work with my Haier TV?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Legend:

    An expert who has written 200 answers of more than 400 characters.

  • Expert
  • 358 Answers

Duckie715

We don't have any codes available for your Haier TV, however, I have provided instructions on how to perform a power scan to locate a code the operate your TV.

http://www.dishnetwork.com/SupportSection/power-scan-instructions

Address To Other Equipment Using Power Scan

  • Remote: All Remotes (except Basic)
    1. With the desired equipment on, press and hold the correct Mode button (SAT) until all mode button backlights illuminate, then release.
    2. Press and release the Power button.
    3. Press the Up button once a second while pointing the remote at the desired equipment. Note: If the code for the equipment comes up, the equipment will power off.
    4. Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.

Posted on Feb 19, 2011

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

NickF DISH
  • 36 Answers

SOURCE: Dish Network IR Remote's SAT Mode Not Working ____

Hello, this is Nick Franta with DISH.

If you are trying to get the remote programmed to the receiver you can remove the smartcard from the receiver and that will prompt the system info screen. This will allow you to program the remote to the receiver.

If you need the process for programming the remote, here it is:

  1. Go to System Info screen (in this case -- obtain by removing smartcard from receiver)
  2. Hold down the SAT button until all mode lights light up.
  3. Enter a number between 1 and 15 using the numeric keypad on the remote.
  4. Press the pound (#) button
  5. Once the SAT button blinks three times, press record.
Hope this helps!

Posted on Jan 03, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sanyo TV Code for Dish remote 21.0 IR/UHF PRO only operates TV Power and Volume Functions.


Hello Witt Thomas,

I can understand the concern and wanting the remote to work the TV Menus. It is possible with our remotes, however it depends on the TV itself. I've seen instances where there are 2 TV's in one house, and 1 will do it, while the other won't.

If you have tried all of the remote codes, and none work, the only other options we have available are to try a powr scan, or teach the remote. This link http://www.mydish.com/support/teach-learning-remote-20-21 can provide the steps on how to teach that model of remote control!

Let me know if you have any other questions.

Tommy Faust
DISH Social Media Representative

Jan 16, 2013 | DISH Network ES161256 21.0 IR / UHF Pro...

1 Answer

I have a haier tv a 722k receiver. my black dish network remote won't change inputs so i can use my ps3 etc.


allday70, we don't have any current codes for a Haier TV, but we can definitely check it out and help you get that programming.

As there are no codes for that TV, I would recommend trying a power scan. I have posted the steps below, though you can view this link: http://www.dishnetwork.com/SupportSection/remote-setup for general information on setting up remotes.

Power Scan to TV:

1.) With the TV on, press and hold the TV button (about six seconds) on top of the remote until all mode button backlights come on, then release.
2.) Press and release the red power button, then press the Up button once a second while pointing the remote at the TV. If the code for the TV comes up, it will power off.
3.) Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times. To verify the code works try several different functions for that equipment.

Let me know if you have any questions or need further assistance!

Tommy Faust
DISH Network

Jun 18, 2011 | DISH Network IR Remote Control

1 Answer

IR Remote Control Remote Control: my control is not working...


Guest

I have provided instructions on how you can program your remote to your TV or readdress to your receiver. Readdressing your remote to your receiver begins with step 5; programming to your TV begins with step 6.

Program remote: http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml

I hope this helps.

Ray Calo
DISH Network

May 18, 2010 | DISH Network IR Remote Control

1 Answer

IR Remote Control Remote Control: Volume control doesn't work on my remote...


Guest

I have provided a link with instructions on how to program your remote to your TV. I have also provided a link with the remote code. I hope this helps.

Program remote to TV, setup 6:
http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml
Ray Calo
DISH Network

May 17, 2010 | DISH Network IR Remote Control

1 Answer

Dish network remote to run RCA DVD player


I had rca remote that did not recieve ir signals but rf signals instead. Check online with rca or in owners manual for what type of signal factory remote sends. The dvd player I had was 5 dvd and that was the case. Dish might have an option like direct tv where you can program rf signals as well. Call dish network support or look online

Apr 25, 2010 | DISH Network IR Remote Control

1 Answer

Remote Problem


Remote codes are programmed into the remote at time of and since the TV was manufactured after the remote it will be unable to have the code as TV manufacturers change codes often. You can try having a 20 or 21 remote sent to you but ensure it will work with your receiver. These remotes are programmable and ar able to learn functions of other remotes. Thanks for using Fix Ya.

Jan 31, 2010 | DISH Network IR Remote Control

1 Answer

Dish network remote with a element tv


Since you dont have a popular brand set you should try using the scan method. Here is a link with a video to help program your dishnetwork remote to work with your set. http://www.disheez.com/videos/dish-network-video/programming-dish-network-remote/

Nov 23, 2008 | DISH Network IR Remote Control

2 Answers

Code for trutech


dish network remotes dont work with very many tv/vcr or tv/dvd combo units

Jul 11, 2008 | DISH Network IR Remote Control

1 Answer

Haier TN201AUV 20"


The GE Universal Remote will do the job. I have on and it works for my Haier TN201AUV TV. You can also find a replacement Haier remote on Remote Hound's web site.

On the other side of this I have a Dish Network remote that WILL NOT work. The Dish Network remote does not list any codes for Haier. Dish Network Tech Support could offer no help.

In an attempt to solve the problem myself, I looked on-line at GE's site listing all of the manufacturers' for their remotes and found the identical code that worked for my Haier TV also listed under APEX TV's. The Dish Remote lists (11) APEX TV codes. Ironically, NONE OF THEM WORK!

I'm stuck with using both remotes... and that's BULL$H!T

Dec 01, 2007 | Haier HTF20R21 20" TV

Not finding what you are looking for?
DISH Network IR Remote Control Logo

2,509 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

brian soufane

Level 3 Expert

693 Answers

john milligan

Level 3 Expert

512 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...